Construction Of An IoT Based Fire Alarm System

Fire accident in industry is a spontaneous and uncontrolled occasion wherein an activity or response of an item, a substance, an individual, or a radiation brings about close to home damage. There are a few mishaps occur because of fire. Fire identifiers are utilized to recognize the fire or smoke at a beginning time and can help in sparing lives. Right now, IOT based alarm has been planned utilizing temperature and smoke sensor. It would not just flag the nearness of fire in a specific reason yet will likewise send related data through IOT. By utilizing the temperature sensor, smoke sensor and there is a simple to advanced convertor, which changes over the simple signs got at the sensor end to computerized and afterward transmits them to a smaller scale controller and to the Arduino. The small-scale controller is modified to turn on the ringer, when the temperature and the smoke arrive at an edge esteem. Simultaneously, Arduino sends the information to the Wi-Fi module ESP32. ESP32 will then the accompanying information to the IOT site, where, approved individuals can take fitting measure so as to check the fire. The gadget id is the one-of-a-kind id given to a gadget, which would enable the work force to get data identified with the area, where the fire is detected. This work is based on fire alarm system using IOT.

1.0 INTRODUCTION

1.1 BACKGROUND OF THE STUDY

A fire is a condition of consuming that delivers the blazes and warmth. The fire can possibly make hurt its inhabitants and serious harm to the property. Mechanical security survey magazine expresses that there are 25,000 people passed on because of fire mishaps in India in the time of 2001-2014 (NCRB, 2014). The harm of structures and loss of human life can be occurred because of fire mishaps in the enterprises. This present examination endeavours for to discover the staff characteristics of business factors and work factors that include which prompts fire mishap in the business.

Putting out fires and observing circumstances are intense today. They concentrate on improve the science and innovation in opposing fire debacles. They are worried about the use of new innovation, for example, IOT and remote sensor arrange in putting out fires and observing field. IOT is truly appropriate for putting out fires with wide degree alongside remote sensor network (Liu et al., 2014).

A key part of fire insurance in the business is to build up the wellbeing framework by utilizing alarm sign to the association by methods for IOT innovation to the encompassing territory in the business. The conceivable weighty harms and bothersome expenses on both condition and network calls for additional improvement of wellbeing methodology and selection of proper techniques in taking care of dangers in industry and fast activity on standard working strategy if there should be an occurrence of arrival of risks detected. The fire mishap from Hong Kong shipyard is a significant episode which passed on to look for regard for the unfathomable capability of perils like fire blast in term of ruin of human life, their wellbeing and resources and enduring effects. The forest fire can be controlled by using IOT based alarm framework is utilized in all the businesses to keep from the fire mishaps (Morris et al., 2017).

A fire accident has wounds offers to the laborers removed remove an unfortunate casualty’s personal satisfaction to a critical degree. Second and severely charred areas regularly leave awful scars, and in the event that these scars are promptly clear, at that point the settlement will for the most part be higher because of enthusiastic harms. Consume wounds can leave an injured individual with interminable agony or loss of portability too, the two of which will require progressing exercise based recuperation.

It is huge to know the issue condition of fire danger in the business present to the seriousness of mishap and impact the official measures to control. The impacts will be experienced if fire will make change state to stifle themselves due any human or mechanical disappointment causes and straightforwardly influence the human life close by and working condition.

The point of this examination about peril present in condition which can be lead to fire accident in the association. The fire accidents happened in ventures ought to be distinguished by utilizing this philosophy and reasonable activities in required to control the fire accident in the enterprises are should be created. The forest fire risk have to be identified and provide the solution for fire fighters using the IOT technology the wildlife and animal lives in the forest is to be saved according to Alonso-Betanzos et al (2013).

1.2 PROBLEM STATEMENT

The Nigerian environment is considered to be hazards prone brought about by man-made and natural disasters due to its geographic circumstance which is exposed to catastrophic, floods droughts and fires. Based on the reports; devastations of these natural hazards and disasters including fires have increased in recent years. Our lifestyle of negligence and adapting to emerging technological solutions puts us at the risk of loss to fire and related occurrences as seen in markets, homes and other public places. The risk of fire occurrence is high especially during the dry season, Christmas and New Year celebration due to firecrackers. In the case where house fires are prevalent, it has effect to derail the economic growth, destroy social and physical capital including infrastructures, which resort to reallocation of ongoing programs to finance relief operations to fatalities and inhabitants and reconstruction efforts which diverts funds to social services. Fires are considered natural and man-made hazards.

Many fire alarms have existed in the past but with some limitations. This device was invented to solve the problem of complex cabling and missing alarm of traditional fire alarm system, an IOT based fire alarm system based on GSM network is designed. ESP32 Microcontroller is main control chip, and the remote alarming and data exchanging are achieved by using GSM module and Wi-Fi module send information to the IOT site. By adopting smoke detector and temperature detector and using a variable threshold alert algorithm with temperature compensation, the accuracy of fire alarm is improved.

1.3 AIM AND OBJECTIVE OF THE PROJECT

The main aim of this work is to construct a device that will detect the unwanted presence of fire by monitoring environmental changes associated with combustion  using GSM SMS Alert system and internet alert system. The objectives of the work are:

  1. To build this device at lower cost
  2. To interface microcontroller with GSM, DHT22, MQ2 and LCD.
  3. To ensure security of our environment, lives and properties

1.4 SIGNIFICANCE OF THE PROJECT

The study will serve as a means of making the reader and the student involved to become familiar with integration of arduino / ESP32 with temperature and smoke sensor.

This device will serve as a means of increasing reliability and protection thereby protecting lives and properties.

1.5 SCOPE AND LIMITATION OF THE STUDY

The scope of this work covers the building of an IoT based fire alarm system using arduino as the heart of the device. Arduino sends the information to the Wi-Fi module ESP32. ESP32 is a chip which is utilized for associating the smaller scale controllers to Wi- Fi organize. ESP32 will then the accompanying information to the IOT site, where, approved individuals can take proper measure so as to curb the fire. This device is limited to the following function:

  1. It sends fire alert SMS and email with Temperature and Smoke Level to given number and email address. SMS and emailing system helps to monitor locations of the fire explosion.
  2. Makes Loud Sound using buzzer to alert about fire. Uses Standard MQ2 Smoke Sensor and DHT22 Temperature Sensor.

1.6 APPLICATION OF THE PROJECT

Fire alarms are prime necessities in modern buildings and architectures, especially in banks, data centers mines, industrial areas, factories and gas stations etc.

1.7 PROJECT ORGANISATION

The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Construction Of An IoT Based Fire Alarm System, and acknowledges the contributions of scholars who have previously conducted similar research [REV4427] …

COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT

CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 AIM AND OBJECTIVES OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 SCOPE AND LIMITATION OF THE STUDY
1.6 APPLICATION OF THE PROJECT
1.7 PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW
2.1 INTRODUCTION
2.2 REVIEW OF RELATED STUDIES
2.3 HISTORICAL BACKGROUND OF FIRE ALARM
2.4 REVIEW OF SMOKE DETECTOR
2.5 REVIEW OF TYPES OF FIRE ALARM SYSTEM
2.6 REVIEW OF FIRE ALARM DESIGN
2.7 REVIEW OF FIRE ALARM PARTS
2.8 REVIEW OF FIRE ALARM INITIATING DEVICES
2.9 FIRE ALARM NOTIFICATION APPLIANCES
2.10 OVERVIEW OF INTERNET OF THINGS

CHAPTER THREE
3.0 METHODOLOGY
3.1 METHODOLOGY
3.2 DESIGN OF IOT
3.3 SYSTEM HARDWARE DESCRIPTION
3.4 SYSTEM SOFTWARE
3.5 SYSTEM CIRCUIT
3.6 PROGRAM CODE
3.7 POWER SUPPLY UNIT

CHAPTER FOUR
4.0 TESTING AND RESULTS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 INSTALLATION OF THE COMPLET DESIGN
4.3 ASSEMBLING OF SECTIONS
4.4 TESTING OF SYSTEM OPERATION
4.5 RESULT AND DISCUSSION

CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES

Document Information

  • Pages: 65 Pages
  • Chapters: 1 – 5 Chapters
  • Words: 9,590 Words
  • Format: DOC/PDF
  • Time: Instant Download
  • Title: Construction Of An IoT Based Fire Alarm System:

YOU MAY LOVE THESE (Recommended)

Posted under:

To start a project on Implementation Of A Smart IoT Based Surveillance Camera, follow these guidelines: This work is on a smart IoT based surveillance camera using ATmega328. In recent times, we used surveillance cameras for monitoring and recording moments, but manual surveillance and real-time monitoring is one of the most important and challenging branches of computer vision, which has been wide…

56 Pages 1 - 5 Chapters 8,289 Words DOC/PDF Format Instant Download UPN4594

Understand how to write the “Design And Construction Of Sound Detector With Alarm System” Project

To develop a project on Design And Construction Of Sound Detector With Alarm System, follow these approaches: This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. The 1st block is pick up amplifier containing the microphone and …

34 Pages 1 - 5 Chapters 6,016 Words DOC/PDF Format Instant Download UPN2155

Posted under:
1.0 INTRODUCTION 1.1 BACKGROUND OF THE STUDY The need for having home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during […]

64 Pages 1 - 5 Chapters 10,002 Words DOC/PDF Format Instant Download UPN4341

Posted under:

To undertake a project on Design And Construction Of GSM-Based Power Supply Alarm System, follow these effective ways: In developing countries, electricity distribution to final consumers stands chances of failure due to epileptic power supply. Most times, failure can come from the electric power provider or problems with poor electrification of a building. Power supply and failure is a frequent experience that o…

49 Pages 1 - 5 Chapters 7,367 Words DOC/PDF Format Instant Download UPN4413

To write a project on Design And Construction Of An Automatic Liquid Level Indicator With Alarm, follow these structure: This project is titled the design and construction of a liquid level sensor and alarm system. It is designed to indicate the level of liquid such as water in an over-head tank. It not only indicates the amount of water present in the overhead tank but also gives an alarm when the tank is full. W…

61 Pages 1 - 5 Chapters 8,506 Words DOC/PDF Format Instant Download UPN4635

Learn the structure to write the “Design and Construction of A Wailing Alarm” Project

To carry out a project on Design and Construction of A Wailing Alarm, follow these effective methods: A wailing alarm is a loud electronics device that produces sound similar to police siren. Siren is used to get other road users or drivers on the road out of their way. This project is on wailing alarm sound that sound effects like the siren of an ambulance or police car which features low-pitche…

50 Pages 1 - 5 Chapters 6,801 Words DOC/PDF Format Instant Download UPN3802

Posted under:

To start a project on Design And Construction Of A Time Relay Based Automatic Power Resumption Alarm, follow these guidelines: Power restoration is a period of time when the electricity supply to a particular building or area is restored, for example because of replacement or servicing damage to the cables or any other reason. Sometimes when power resumes the occupant of the house may not be aware unless power resumption…

35 Pages 1 - 5 Chapters 4,531 Words DOC/PDF Format Instant Download UPN4545

To develop a project on Design And Construction Of A Sensitive Touch Alarm Security System, follow these approaches: Sensitive Touch Alarm system is an electronic device that can be used as a security device. It is an electronic watch dog, because when installed to a door, and somebody touches the door, it sounds an alarm. The unit is built from discrete semi conductor device. It is relatively simple in both it…

56 Pages 1 - 5 Chapters 7,447 Words DOC/PDF Format Instant Download UPN3484

To undertake a project on Construction Of A Gas Leakage Detector Alarm Using Microcontroller, follow these effective ways: LPG gas is commonly used in our home for cooking purpose. LPG is used in school and college canteens; also it is used in various industries. Accidents never happen with a prior intimation. There are chances of gas leakage due to some negligence or as a result of faulty cylinder. In such cases, if…

40 Pages 1 - 5 Chapters 6,872 Words DOC/PDF Format Instant Download UPN2646

To write a project on Design And Construction Of A Multipurpose Security System With Alarm And Display, follow these structure: This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market. The report discusses the various unit and stages of the alarm system, thes…

71 Pages 1 - 7 Chapters 8,311 Words DOC/PDF Format Instant Download UPN2149

Live Chat