Design And Construction Of An Electric Gas Cooker With Temperature Control Oven
The design and construction of an electric gas cooker with a temperature-controlled oven involve integrating advanced heating elements and electronic control systems. This innovative appliance combines the efficiency of gas cooking with precise temperature regulation for baking and roasting. The design encompasses a durable housing for the cooker, incorporating safety features like flame failure detection for gas burners and overheat protection for the oven. The construction involves assembling high-quality components such as electric ignition systems, gas valves, thermostats, and insulation materials for optimal heat retention. The temperature control mechanism utilizes sensors to monitor and adjust the oven’s heat output, ensuring consistent cooking results. This project requires expertise in electrical engineering, mechanical design, and safety standards compliance to deliver a reliable and user-friendly electric gas cooker with a temperature-controlled oven, meeting the demands of modern kitchens and culinary enthusiasts.
ABSTRACT
This work is on an electric gas cooker with temperature control oven. An electric gas cooker is an electric and gas powered cooker for heating and cooking of food. An electric gas cooker has two different heating place, one for electric powering and the other for gas. An electric cooker is powered by electricity, while gas cooker is powered by gas. A gas cooker uses natural gas, propane, butane, liquefied petroleum gas or other flammable gas as a fuel source.
An electric cooker used to incorporate with an oven. An oven is a thermally insulated chamber used for the heating, baking or drying of a substance and most commonly used for cooking. An electric cooker and oven operates with the same power source. There will be knobs to determine the temperature of the cooker and the oven. The temperature of the oven is to be controlled automatically using a temperature sensor known as thermostat or theorist.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 OBJECTIVE OF THE PROJECT
- IMPORTANCE OF OVENS
- LIMITATIONS OF OVEN
CHAPTER TWO
LITERATURE REVIEW
- HISTORY OF OVENS
- REVIEW OF DIFFERENT TYPES OF OVENS
- HISTORICAL BACKGROUND OF THERMOSTAT
- REVIEW OF GAS COOKER
CHAPTER THREE
METHODOLOGY
- BLOCK DIAGRAM OF TEMPERATURE CONTROL OVEN
- BLOCK DIAGRAM OF TEMPERATURE CONTROL OVEN
- SECTIONAL DESCRIPTION OF THE SYSTEM
- CIRCUIT DIAGRAM
- DESIGN CALCULATION
- CIRCUIT OPERATION
- MODE OF OPERATION OF THE SYSTEM
- SEQUENCE OF OPERATION
- PARTS OF AN ELECTRIC AND GAS COOKER
- HOW ELECTRIC COOKER (STOVE) WITH OVEN WORK
CHAPTER FOUR
RESULT ANALYSIS
- CARE AND MAINTENANCE OF ELECTRIC GAS COOKER AND OVEN
- SAFETY PRECAUTIONS
- INSTALLING AN ELECTRIC COOKER
- MATERIALS AND REASONS FOR USE
- WORKING TOOLS FOR PROJECT
- PROBLEM ENCOUNTERED
CHAPTER FIVE
- CONCLUSION
- RECOMMENDATION
- REFERENCES
CHAPTER ONE
1.0 INTRODUCTION
The idea behind the design and construction of this system is to make available or alternative means of cooking food, baking and roasting food for household or industrial purpose. This goes a long way in helping to curb the problem frequently encountered problem-spoil food, which is cause as result of inadequate boiling and roasting of food.
An electric gas cooker is an electric and gas powered cooker for heating and cooking of food. An electric gas cooker has two different heating place, one for electric powering and the other for gas. An electric cooker is powered by electricity, while gas cooker is powered by gas. In cooking, a gas cooker is a cooker/stove which uses natural gas, propane, butane, liquefied petroleum gas or other flammable gas as a fuel source.
An electric cooker used to incorporate with an oven. An oven is a thermally insulated chamber used for the heating, baking or drying of a substance and most commonly used for cooking. An electric cooker and oven operates with the same power source. There will be knobs to determine the temperature of the cooker and the oven. The temperature of the oven is to be controlled automatically using a temperature sensor known as thermostat or thermistor.
1.1 OBJECTIVES
This project is undertaken to
(1) Compare the various ways used in the construction of an electric gas cooker with temperature control oven.
(2) Disclose the different types of process in the manufacturing of an electric oven and also an electric gas cooker in the past in comparison to the modern days method.
(3) Exploit the local facilities available in the construction of the oven as against imported ovens.
(4) To exhibit the usefulness of a oven in the economy and technology growth of the nation.
(5) To know the convenience in the use of alternate power source for operation of ovens.
(6) Discover the basic principle involved in the design, installation and maintenance an electric gas cooker and oven.
1.2 IMPORTANCE OF OVENS
In actual analytical enunciation an oven is an enclosed chamber in which things are heated or cooked with various sources of power.
Its importance borders around its function, which are as follows;
(i) It is used to meet the everyday basic need of cooking, (baking, toasting, gritting, toasting) of food materials for human consumption.
(ii) Ovens are used for heat treatment of substance in laboratories and industries.
(iii) Also as a means of preservation by heat application to perishable materials (organic and inorganic) in general.
(iv) Sterilization of instruments and equipment for industrial use is done by heat application using oven.
(v) Expelling of moisture content to a required measure in some substance is also done using oven.
(vi) Early manufactured ovens where used as a source of room heaters during cold weathers in cold climates.
Other importance boarding around its energy source is that the use an alternative source of energy when either fossil fuel or electricity is not available. This can be relatively save cost when necessitated.
1.3 LIMITATIONS OF OVEN
Disadvantages in the use of ovens:
(i) Cleaning and repair is a difficult and time- consuming endeavor.
(ii) Expect for mass production singular construction is relatively expensive to produce.
(iii) If precautions are not well carried out, it can result in fire hazard, which is dangerous to life and properties.
(iv) Because an oven provides heat for one or more areas, the temperature may vary in different areas of the oven.
(v) Oils and moisture collected on metal surface can end up trying to rust the metal coating if not clean regularly.
(vi) It is expensive to operate in high volume operations.
(vii) Speed seems to be the key factor and time taken to get to required constant temperature can be wastage of time.
(viii) Access to internal component n case of adjustment and maintenance is tasking as it requires an entire disassembling.
(ix) In case of mechanical faults resulting from shut down, an entire disassembling and requires is required.
(x) Due to its function by heating, there is always a premature wear or mechanical failure of
SHARE PROJECT MATERIALS ON:
Author: See the writer of ‘Design And Construction Of An Electric Gas Cooker With Temperature Control Oven’ name on the first page of the downloaded file.
Acknowledgement: You must acknowledge and reference the writer of Design And Construction Of An Electric Gas Cooker With Temperature Control Oven on your acknowledgement and reference pages respectively.
Upload Similar: You can upload any content similar to Design And Construction Of An Electric Gas Cooker With Temperature Control Oven and get paid when someone downloaded the material.
Download: Click on “Donate & Download” under this Design And Construction Of An Electric Gas Cooker With Temperature Control Oven Title and you will be redirected to download page after the donation or chat with Us for alternative methods.
Content Size: Design And Construction Of An Electric Gas Cooker With Temperature Control Oven contains , and .