Design And Construction Of A Battery Cage

Battery or bird cages are homes for domesticated birds. Birds require a house in which they can fly and have some freedom but still ensure they do not fly away. Bird cages are constructed to be large enough to accommodate the motion and daily activities of domesticated birds. This work was carried out to build a bird cage using available materials.

1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
The production of eggs for human consumption is based on several technologies, based on the knowledge and experience gathered for more than a century. Until recently, the battery cage production system was believed to be the most intensive, most efficient and most appropriate for rearing laying hens (Kabakchiev, 2010). The development of this system has also gained many opponents, who denied it from the point of view of animal welfare.
The poultry egg industry in Nigeria has developed rapidly over the past few decades. Until 1960, laying chickens were reared in open barns located in the corners of farmyards. Production in closed barns began in the early 1960s, when poultry farming began to become a full-time operation. The battery cage system was introduced into Nigeria in the mid-1980s, and barns without open side curtain walls were first built in 1984 by several poultry farmers. Since then, commercial egg production systems have moved toward bigger farms and a large part of the egg production costs can be reduced through the automation of facilities. Since 1980, there has been a change from full-time poultry farms to poultry factories (Green et al, 2010). With the modernization of the egg production system, specialization in hatching, rearing, egg grading, and packing has taken place and vertically and horizontally integrated systems have been established (Green et al, 2010).
Housing system is an important factor that influences the production performance and some egg quality parameters.
Different production systems are available in laying hens’ husbandry such as conventional, enriched cage, and free range systems.

1.2 PROBLEM STATEMENT
When chicks grow up, you may need to transfer them to a cage. Cage raising is better for a commercial farm because it saves space and feed. Moreover, the chickens are separated from the manure, cage raising reduces the spread of disease and the risk of infection.
Nowadays, more and more farms are choosing to buy battery cages to raise chickens. According to incomplete statistics of customer data, from 2018 to 2019 alone (Yousaf et al, 2019), thousands of buyers imported chicken battery cages from China. It also shows that the farmer’s demand for cage farming is gradually increasing, and cage farming has become a major trend in poultry breeding. Importing battery cage costs lots of money, this study was carryout to build a battery cage with locally made material (Green et al, 2010).

1.3 OBJECTIVES OF THE STUDY
The objectives of this study are:
i. To build a type of intensive poultry housing system in which chickens are kept in compartment units.
ii. To provide a means of making eggs roll from the back to the front of the cage for easy collection
iii. To minimize waste from poultry birds

1.4 SCOPE OF THE STUDY
This scope of this work is on building system for poultry farming which involves the arrangement of similarly-looking cages in rows and columns.
Also, the rows and columns of the battery cage are closely knit together with the same dividing walls as the cells of a battery. Battery cage is associated with poultry farming, but one can also use it to keep other animals. What differentiates the chicken battery cage from most other cages is that its floors slope from back to front.

1.5 ADVANTAGES OF BATTERY CAGE
The following economic advantages to battery cages (Appleby et al., 2014):
1. It is easier to care for the pullets; no birds are underfoot.
2. Floor eggs are eliminated.
3. Eggs are cleaner.
4. Culling is expedited.
5. In most instances, less feed is required to produce a dozen eggs.
6. Broodiness is eliminated.
7. More pullets may be housed in a given house floor space.
8. Internal parasites are eliminated.
9. Labor requirements are generally much reduced

1.6 DISADVANTAGES OF THE BATTERY CAGE
The disadvantages of battery cages are:
1. The handling of manure may be a problem.
2. Generally, flies become a greater nuisance.
3. The investment per pullet may be higher than in the case of floor operations.
4. There is a slightly higher percentage of blood spots in the eggs.

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Design And Construction Of A Battery Cage, and acknowledges the contributions of scholars who have previously conducted similar research [REV4300] …

COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT

CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 OBJECTIVES OF THE PROJECT
1.4 SCOPE OF THE PROJECT
1.5 ADVANTAGES OF BATTERY CAGE
1.6 DISADVANTAGES OF THE BATTERY CAGE

CHAPTER TWO
LITERATURE REVIEW
2.1 OVERVIEW OF THE STUDY
2.2 HISTORICAL BACKGROUND OF BIRD CAGE
2.3 HISTORICAL BACKGROUND OF THE STUDY
2.4 TYPES OF CHICKEN BATTERY CAGE SYSTEM
2.5 BENEFITS OF USING POULTRY BATTERY CAGES FOR CHICKEN PRODUCTION

CHAPTER THREE
3.0 MATERIALS AND METHOD
3.1 MATERIALS USED
3.2 METHOD

CHAPTER FOUR
RESULT ANALYSIS
4.1 DISCUSSION
4.2 CHOOSING A BIRD CAGE

CHAPTER FIVE
5.1 CONCLUSION AND RECOMMENDATION
REFERENCES

Document Information

  • Pages: 48 Pages
  • Chapters: 1 – 5 Chapters
  • Words: 5,206 Words
  • Format: DOC/PDF
  • Time: Instant Download
  • Title: Design And Construction Of A Battery Cage:

YOU MAY LOVE THESE (Recommended)

How to write the “Installation Of Solar Battery” Project

Posted under:

To start a project on Installation Of Solar Battery, follow these guidelines: Batteries are what make a solar energy system an off-grid solar system. Without adequate storage, the energy generated is fed into the house and used or not used and wasted. Batteries enable you to take generated energy and store it for later use. The purpose of this study is to explain the insta…

48 Pages 1 - 5 Chapters 6,592 Words DOC/PDF Format Instant Download UPN4605

Understand how to write the “First Edition Of The Tape Recorder Servicing Manual” Project

To develop a project on First Edition Of The Tape Recorder Servicing Manual, follow these approaches: The essential instrument for any workshop are now and flutter meter electronic mill voltmeter audio Osillator distortion test set: NAB1 D/N and CCIR weighting filers IKH2 band pass filter tension Jauges (with scale ranging from milligram to kilogram) Torgue Gauges B.A and metric open and box span…

36 Pages 1 - 5 Chapters 4,753 Words DOC/PDF Format Instant Download UPN2185

Discover how to write the “Design And Construction Of Battery Charger” Project

To undertake a project on Design And Construction Of Battery Charger, follow these effective ways: This project which consists of four chapters deals extensively with the design and construction of a battery charger which is capable charging a 12 volts, battery. The first chapter which is the introductory chapter goes a long way in defining the battery charger and explaining of the mode of ope…

35 Pages 1 - 5 Chapters 3,427 Words DOC/PDF Format Instant Download UPN2153

To write a project on Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display, follow these structure: Electronic Components require direct current (dc) for their effective operation. This direct current can be gotten either by rectifying an alternating current (ac) or Connecting the system to a direct current source which is usually a battery. It is observed that after some period of operation, …

32 Pages 1 - 5 Chapters 4,208 Words DOC/PDF Format Instant Download UPN22943

Learn the structure to write the “Design And Construction Of An Automatic Battery Charger ABC” Project

To carry out a project on Design And Construction Of An Automatic Battery Charger ABC, follow these effective methods: The practical importance of a battery charging unit in today’s world cannot be over emphasized. This is so since these batteries or accumulators are immensely needed by automobiles and in science laboratories. This thesis describes the methodical approach to the design and construction of any bat…

31 Pages 1 - 5 Chapters 3,237 Words DOC/PDF Format Instant Download UPN2137

Posted under:

To start a project on Design And Construction Of A Solar Powered Automatic Battery Charger For 6 And 12V Lead Acid Battery, follow these guidelines: This project focuses on the design and construction of a solar battery charger, crafted to address the increasing need for a reliable power supply to keep batteries charged. A solar battery charger is an electrical device that harnesses the photovoltaic effect to convert light energy directly int…

47 Pages 1 - 5 Chapters 6,311 Words DOC/PDF Format Instant Download UPN4446

To develop a project on Design And Construction Of A Microcontroller Based 12V/30A Car Battery Charger, follow these approaches: This project is on a microcontroller based 12V/30A battery charger. The Automatic Battery Charger circuit presented in this work can automatically charge a 12V at a current of 30A. Special features of the charger are as follows. It automatically controls the charging current as per the status of …

49 Pages 1 - 5 Chapters 7,055 Words DOC/PDF Format Instant Download UPN4651

INTRODUCTION All modern engineering system include certain aspects of control systems at some point in their broadcast sense, control engineering and the associated theory are concerned with the means by which systems may be made to behave an a desired way. The system on this thesis is a DC – AC converter, which is an apparatus which is used for conversion of Direct Current to Alternating Current or signal. In our country, this equipme […]

31 Pages 1 - 5 Chapters 3,579 Words DOC/PDF Format Instant Download UPN2317

Discover how to write the “Design And Construction Of A Car Battery Monitoring System” Project

Posted under:

To undertake a project on Design And Construction Of A Car Battery Monitoring System, follow these effective ways: Car battery level monitor indicates the status of the battery just by glowing LED’s. This work explains you how to design battery level indicator. You can use this circuit to check car battery or inverter. So by using this circuit, we can increase the lifetime of battery. The heart of this batter…

49 Pages 1 - 5 Chapters 7,391 Words DOC/PDF Format Instant Download UPN4354

To write a project on Design And Construction Of A Battery Charger With Over-Charge Cut-Off, follow these structure: A battery charger is an electrical device employed for charging batteries.  These batteries that are usually charged by battery charger are the storage batteries also known as “accumulator” the battery charger changes.  The alternating current forms the power line into d.c suitable for charging. …

49 Pages 1 - 5 Chapters 7,070 Words DOC/PDF Format Instant Download UPN3813

Live Chat