Design And Construction Of 2kva Step Up Transformer With Input Voltage Regulation And Control Circuit

Download Complete Material

The Design And Construction Of 2kva Step Up Transformer With Input Voltage Regulation And Control Circuit (PDF/DOC)

Chapter One

INTRODUCTION
This chapter introduces the Design And Construction Of 2kva Step Up Transformer With Input Voltage Regulation And Control Circuit and its relevance, states the research problems, research questions, and objectives, provides a background of the study, and should also include the research hypothesis…

Chapter Two

LITERATURE REVIEW
This section presents a review of related literature that supports the current research on the Design And Construction Of 2kva Step Up Transformer With Input Voltage Regulation And Control Circuit, systematically identifying documents with relevant analyzed information to help the researcher understand existing knowledge, identify gaps, and outline research strategies, procedures, instruments, and their outcomes…

Click the button below to request the ‘COMPLETE MATERIAL,’ ‘Table of Contents,’ ‘Abstract,’ or ‘Chapter One’

Related Field(s):

Electrical Electronics Engineering (2458)

Similar Topics (Recommended)

Design And Construction Of A 220V to 12V Single Phase Step Down Transformer.

26 Pages

|

3,047 Words

This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu. I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of operation, the design and construction procedure. Crit […]

Design And Construct A Single Phase Auto-Transformer Of Rating 1Kva, And Step Down Voltage Of 240V And Voltage Taps Of 120, 48, 24V, 12V..

The project presents here is on design and construct a single phase auto-transformer of rating 1kva, and step down voltage of 240v and voltage taps of 120, 48, 24v, 12v. An autotransformer is an electrical transformer with only one winding. In an autotransformer portions of the same winding act as both the primary and secondary. The winding has at least three taps where electrical connections are made. Autotransformers have the advan […]

Design And Construct A Single Phase Auto-Transformer Of Rating 3Kva, And Step Down Voltage Of 240V And Voltage Taps Of 120, 48, 24V, 12V..

The project presents here is on design and construct a single phase auto-transformer of rating 3kva, and step down voltage of 240v and voltage taps of 120, 48, 24v, 12v. An autotransformer is an electrical transformer with only one winding. In an autotransformer portions of the same winding act as both the primary and secondary. The winding has at least three taps where electrical connections are made. Autotransformers have the advan […]

Design And Construction Of A 220-110V Step Down Transformer.

This work is on 220vac to 110vac power supply using transformer, which served as a step down transformer whose secondary voltage is less than its primary voltage. It is designed to reduce the voltage (220v) from the primary winding to 110v in the secondary winding. As a step-down unit, the transformer converts high-voltage, low-current power into low-voltage, high-current power. The larger-gauge wire used in the secondary winding is n […]

Design And Construction Of A Transformer Temperature Monitoring With Auto Circuit Breaker Alarm.

ABSTRACT Temperature monitoring system for power transformers submerged in oil applied preferentially in transformers submerged in oil and it presents several facilities in the sense of becoming temperature monitoring more reliable and safe, with highlight for the redundant measurement of temperature of the top of the oil; self-calibration of the temperature measurement entrances by means of internal references and specific electro […]

Design And Construction Of An Automatic Transformer Winding Machine.

ABSTRACT In this project “microcontroller based automatic transformer winding machine" main objective is to bring out a machine which can implement the idea of automation in Transformer winding or any type of coil windings. The proposed system controls the speed of a winding machine in order to obtain the optimum stop point in terms of security and fast production. The system is based on a microcontroller and an extremely simple hardw […]

Design And Construction Of A 220V/50V Step Down Transformer With Power Rating Of 5000VA.

ABSTRACT This work is on 220vac to 50vac step down transformer. A Transformer is a static apparatus, with no moving parts, which transforms electrical power from one circuit to another with changes in voltage and current and no change in frequency. There are two types of transformers classified by their function: Step up Transformer and Step down Transformer. In this work we are looking at a step down transformer whose secondary volta […]

This Study On The “Design And Construction Of 2kva Step Up Transformer With Input Voltage Regulation And Control Circuit” Is Relevant To Students And Researchers In Electrical Electronics Engineering And Related Fields.

Keywords:

Transformer