Construction Of Two Feet Electronics Fluorescent Lamp

A Case Of Institute Of Management And Technology Imt Enugu States

Pages: 32 | Words: 3936 | Chapters: 1-5 | Type: Project

Abstract

Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The incrative nature of engineering depends on the technical know-how of the engineer.
The purpose of practical project to students is to help them acquire practical knowledge in their choosing area of specification. It helps them to have a foretaste of the real world.
This report is a comprehensive report on the practices project I did. Precisely, with adequate knowledge and preparation, the student will celebrate victory from time to time.
Onyechi Ifeoma .M.
November, 2007.

Chapter One

Title Page
Dedication
Acknowledgement
Preface
Table Of Content
Abstract

 

Chapter One
1.0 Introduction

Chapter Two
2.0 Literature Review

2.1 Component Description
2.2 Capacitor
2.2.1 Characteristic Of Capacitors
2.3 Resistor
2.4 Transformer
2.5 Transistor
2.6 Diode

Chapter Three
3.0 Principle Of Operation

3.1 Block Diagram
3.2 Circuit Diagram
3.3 Wiring Diagram

Chapter Four
4.0 Construction

4.1 How The Construction Was Made
4.2 Construction Of The Chassis (Casing)
4.3 Flat Pattern Drawing Of The Chassis
4.4 Tools Used During Construction

Chapter Five
5.0 Testing & Result

Chapter Six
6.0 Recommendation And Conclusion

6.1 Recommendation
6.2 Conclusion
Reference

Table of Contents

Title Page
Dedication
Acknowledgement
Preface
Table Of Content
Abstract

 

Chapter One
1.0 Introduction

Chapter Two
2.0 Literature Review

2.1 Component Description
2.2 Capacitor
2.2.1 Characteristic Of Capacitors
2.3 Resistor
2.4 Transformer
2.5 Transistor
2.6 Diode

Chapter Three
3.0 Principle Of Operation

3.1 Block Diagram
3.2 Circuit Diagram
3.3 Wiring Diagram

Chapter Four
4.0 Construction

4.1 How The Construction Was Made
4.2 Construction Of The Chassis (Casing)
4.3 Flat Pattern Drawing Of The Chassis
4.4 Tools Used During Construction

Chapter Five
5.0 Testing & Result

Chapter Six
6.0 Recommendation And Conclusion

6.1 Recommendation
6.2 Conclusion
Reference

Click this button to Download the Construction Of Two Feet Electronics Fluorescent Lamp complete material

Download Complete Material (Instantly)

Related Departments

Cite This Page

UniProjects (2013, September 12). Construction Of Two Feet Electronics Fluorescent Lamp. UniProjects. https://uniprojects.net/electrical-electronics-engineering/project-topics-materials/construction-of-two-feet-electronics-fluorescent-lamp/