Design And Construction Of A 2.5KVA Pure Sinewave Inverter System
Pages: 56 | Words: 9669 | Chapters: 1-5 | Type: Project
Abstract
This project entails the design and construction of a pure sine wave inverter system, which generates a pure sine wave output identical to the mains supply. Unlike modified sine wave inverters, pure sine wave inverters produce a high-quality output that ensures proper functioning of high-end electronic equipment and smooth operation of appliances with reduced heat and noise.
The pure sine wave inverter takes in 12V DC from a battery and inverters it to 220V, 50Hz AC, operating silently and without producing hazardous carbon monoxide. This makes it a safe and reliable option for use anywhere, unlike generators. Additionally, the circuit is capable of charging the battery when the mains power is available, significantly reducing operational costs.
Table of Contents
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
1.0 Introduction
1.1 Objective of the project
1.2 Significance of the project
1.3 Application of the project
1.4 limitation of the project
1.5 Inverter rating
1.6 types of inverter
1.7 Important Consideration for Inverters
CHAPTER TWO
2.0 Literature review
2.1 Review of history of an inverter
2.2 Review of how to choosing the right inverter
2.3 Review of the difference between sine wave and modified sine wave inverter.
2.4 Review of inverter capacity
2.5 Safety of inverter
CHAPTER THREE
3.0 Construction
3.1 Basic designs of an inverter
3.2 Block diagram of the system
3.3 system operation
3.4 circuit diagram
3.5 circuit description
3.6 Description of components used
3.7 How to Choose A Right Inverter And Battery
3.8 How to choose the best inverter battery
CHAPTER FOUR
RESULT ANALYSIS
4.0 Construction Procedure and Testing
4.1 Casing and Packaging
4.2 Assembling of Sections
4.3 Testing of System Operation
4.4 Cost Analysis
CHAPTER FIVE
5.0 Conclusion
5.1 Recommendation
5.2 References
Click this button to Download the Design And Construction Of A 2.5KVA Pure Sinewave Inverter System complete material
Download Complete Material (Instantly)Similar Project Materials
- Design And Construction Of A Remote Control Switching Device For Household Appliances Application
- Design And Construction Of Burglary Proof (Window)
- Design And Construction Of A Fire Alarm System Using LDR, 555 Timers And Relay
- Design And Construction Of Fire Alarm System In A Two Storey Building
- Design And Construction Of A Three Phase Automatic Change Over Switch With Generator Starter And Cut-Off
- Design And Construction Of 12volts Car Battery Automatic Charger With Voltage Level Indicator And Charging Process Display
- Design And Construction Of Security Lighting Control System Using Mobile Phone