Design And Construction Of A PC-Based Candle Igniter
The design and construction of a PC-based candle igniter involves the integration of hardware and software components to facilitate automated ignition processes. This system typically comprises a microcontroller or microprocessor unit connected to a computer via USB or serial communication, alongside peripheral devices such as sensors, actuators, and a power supply. The microcontroller interprets commands from the computer, executes ignition sequences, and monitors sensor inputs for safety and control purposes. Software programming enables user interface development for initiating ignition, setting parameters, and monitoring system status. Hardware components may include a spark igniter, solenoid valve for fuel release, and safety features like temperature and flame sensors. Implementing proper circuit design, safety protocols, and testing procedures ensures reliable and efficient candle ignition, catering to diverse applications such as aromatherapy, decorative lighting, or emergency illumination, enhancing convenience and safety while incorporating user-friendly interfaces and robust construction techniques for optimal performance and longevity.
ABSTRACT
This work is on a PC based candle igniter system that lets you light up a candle using matchsticks by just pressing the ‘Enter’ key on the PC’s keyboard. It is especially useful when celebrating such occasions as birthdays and anniversaries.
The number of matchsticks required to light up the candle is placed on the candle. The heating coil for igniting the matchsticks is kept near them.
The interface circuitry between the PC and the heating coil for the candle-matchsticks arrangement comprises an inverter, monostable and relay driver. Transistor BC548 (T1) acts as the inverter, IC 555 (IC1) is configured as the monostable circuit and transistor SL100 (T2) is the relay driver.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
4.7 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Author: See the writer of ‘Design And Construction Of A PC-Based Candle Igniter’ name on the first page of the downloaded file.
Acknowledgement: You must acknowledge and reference the writer of Design And Construction Of A PC-Based Candle Igniter on your acknowledgement and reference pages respectively.
Upload Similar: You can upload any content similar to Design And Construction Of A PC-Based Candle Igniter and get paid when someone downloaded the material.
Download: Click on “Donate & Download” under this Design And Construction Of A PC-Based Candle Igniter Title and you will be redirected to download page after the donation or chat with Us for alternative methods.
Content Size: Design And Construction Of A PC-Based Candle Igniter contains , and .