Design And Construction Of House Bell With Indicating Light
The design and construction of a house bell with an indicating light involves integrating traditional doorbell functionality with modern visual indicators for enhanced convenience and accessibility. This system typically consists of a doorbell button connected to a bell mechanism inside the house, which when pressed, triggers the bell to ring. Additionally, an indicating light, often an LED, is installed near the entrance or in a visible location within the house. When the doorbell is pressed, the indicating light illuminates, providing a visual cue in addition to the auditory signal. The construction requires wiring the doorbell button to the bell mechanism and connecting the indicating light to the same circuit. Proper insulation and weatherproofing measures are essential for outdoor installations to ensure durability and reliability. Moreover, incorporating energy-efficient components and wireless connectivity options can further enhance functionality and reduce maintenance requirements. Through this integrated design approach, the house bell with an indicating light offers improved accessibility and convenience, catering to diverse user preferences and needs while ensuring seamless operation.
Title Page
Approval Page
Acknowledgement
Dedication
Abstract
Chapter One
1.0 Introduction
Chapter Two
2.0 Literature Review
2.1 Preamble
2.2 Essential Parts Or Features Of An Electric Ball
2.3 The Main Call Line
2.4 The Sub – Call Line
Chapter Three
3.0 Materials And Methodology
3.1 Introduction
3.2 Materials
3.3 The Wooden Board
3.4 Switches
3.5 Lamp Holder
3.6 Cable
3.7 Electric Bell
3.8 Filament Lamp
3.9 Plug
3.10 Joint Box
3.11 Wooden Block
3.12 Nails
3.13 Screw Nail
3.14 Clip
3.15 Methodology
3.16 Mode Of Connection And Construction
Chapter Four
4.0 Principle Of Operation
4.1 Schematic Diagram Of An Electric Bell With Light Indictor
4.2 Mode Of Operation
Chapter Five
5.0 Result Analysis And Discussion
5.1 The Input Stage
5.2 The Power Supply Stage
5.3 Use And Economic Importance
5.4 Use Of The Call System In Hotel Building
Chapter Six
6.0 Conclusion And Recommendation
6.1 Problem Encountered
6.2 Conclusion
6.3 Recommendation
References / Bibliography
1.0 INTRODUCTION
To cleanly understand the wood information technology and communication which is the life blood of all human activities the assimilation of communication technology is of great important. The development of communication technology in any nation makers communication technology easy and pleasant. And one of basic building block of a communication system is the house bell indicating which serves as inter-call light to ensure proper communication within an officer or domestic.
An electrical bell can be define as dunce which can be use to alent signal for indicating of problem in alarm signals.
The device is classified according to were types, mode of operation and the application there are numerous types of alarming signals but for the purpose of this project an electric bell with light indicator is considered.
These device receives its input signal form an electrical device known as bell push. That was connected at the wing board Via joint box. The signal (current) passes through the wire and fed into the bell which cause the bell to ring in order to alent the receiver.
Furthermore, the objective of these house ell is to provide a cheap and continent means of communication between two or more people in the same premises.
The major different between inter- communication system using telephone and electric bell is that the signal is transmitted by the call indicator system in place of speech as in the case of the telephony.
SHARE PROJECT MATERIALS ON:
House Bell With Indicating Light:
Designing and constructing a house bell with an indicating light is a relatively straightforward project that can enhance your home’s doorbell system. Below are the steps and components you’ll need to create this DIY project:
Materials and Components:
- Doorbell Button: This is the button people will press to ring the bell. It can be a wired or wireless button, depending on your preference.
- Doorbell Chime: The chime produces the traditional “ding-dong” sound when the doorbell is pressed. You can choose from a variety of chime options.
- Indicator Light: Select a small, bright LED indicator light. It can be a single-color LED or a multi-color LED, depending on your preference.
- Power Source: You’ll need a power source for both the chime and the indicator light. Typically, doorbell systems use low voltage (usually 12-24V AC), so you’ll need a transformer to step down the voltage if your home’s power supply is higher voltage.
- Wiring: Appropriate wiring to connect all components. This usually includes bell wire for connecting the doorbell button, chime, and indicator light.
- Electrical Box: A small electrical box to house the components and protect the wiring.
- Tools: Screwdriver, wire strippers, wire nuts, electrical tape, and a drill.
Construction Steps:
- Plan the Installation:
- Decide where you want to install the doorbell button, chime, and indicator light.
- Ensure that the wiring can reach all components without any issues.
- Install the Doorbell Button:
- Attach the doorbell button to the exterior wall next to your front door using screws or adhesive, following the manufacturer’s instructions.
- Connect one wire from the doorbell button to one terminal of the transformer.
- Install the Indicator Light:
- Drill a small hole for the indicator light near the doorbell chime location, inside your home.
- Mount the indicator light on the interior wall.
- Connect Wiring:
- Connect the other wire from the doorbell button to the corresponding terminal on the chime.
- Connect one wire from the indicator light to the other terminal of the transformer.
- Connect the other wire from the indicator light to the same terminal on the chime where the doorbell button is connected.
- Connect Power:
- Connect the transformer to your home’s power supply following the manufacturer’s instructions. Ensure it is properly grounded.
- Test the System:
- Press the doorbell button to test if the chime sounds and the indicator light illuminates.
- Secure the Wiring:
- Use wire clips or staples to secure the wiring along its path, ensuring it’s tidy and out of the way.
- Finish and Cover:
- Place all components, including the transformer, inside the electrical box.
- Secure the box to the wall and cover it.
- Customization:
- Depending on the type of LED indicator light chosen, you can customize the light color and behavior to your preference, such as flashing or changing colors when the doorbell is pressed.
- Final Testing:
- Test the doorbell system once again to make sure everything is working correctly.
With this design and construction, you’ll have a doorbell system with an indicating light that adds a visual element to the traditional auditory doorbell, making it suitable for various situations and accessibility needs.