»

Design Of A Real Time School Bus Tracking System Using (RFID )

The design of a real-time school bus tracking system employing Radio Frequency Identification (RFID) technology involves the integration of RFID tags on both the school buses and the students’ ID cards. These RFID tags emit unique identifiers that are captured by RFID readers installed on the buses, enabling real-time tracking of their locations. Additionally, readers at designated stops or checkpoints along the bus route further enhance tracking accuracy. The system’s backend comprises a central database and a web-based or mobile application interface accessible to school administrators, parents, and authorized personnel. This interface provides real-time updates on bus locations, estimated arrival times, and notifications for parents when buses approach designated stops or encounter delays. Leveraging RFID technology ensures efficient and secure tracking, enhancing safety and operational efficiency while providing stakeholders with timely information for improved decision-making and peace of mind.

ABSTRACT

In present time due to increase in number of kidnapping and road accident cases, parent always worry about their children.

This paper proposes a SMS based solution to aid parent to track their children location in real time. The proposed system takes the advantage of the location services provided by module kit which carry by the child in their school bag. It allows parent to get their child location on a real time map by the geographical co-ordinates which send by module kit. Information such as GPS co-ordinates and time are gathered on the module kit.

The communication between the parent and the child module kit is done using short message service (SMS). SMS offers the system unique features. It will allow the system to work without the need of internet connection. The system sends the location of child’s smart phone to parent’s smart phone when the parent wishes to check on the child.

KEYWORDS

RFID (Radio Frequency Identification)
GPS (Global Positioning system)
Child Tracking System

TABLE OF CONTENT

Title i

Certification ii

Dedication iii

Acknowledgment iv

Abstract v

TABLE OF CONTENT

CHAPTER ONE
1.0 Introduction 1

Objectives of study and Goals 2

1.2 Research Goals and Objective 2

1.3 Definition of Terms 4

1.4 User advantages 5

CHAPTER TWO
LITERATURE REVIEW

2.1 RFID Technology 6

2.2 RFID Application in transportation field 8

2.3 System capabilities 9

2.3.1 Data acquisition 10

2.3.2 Biometric identification 11

CHAPTER THREE
3.0 METHODOLOGY PREVIEW 12

3.1 Existing system working and methodology 13

3.2 System design and requirement 14

3.3 Hardware components Description 15

CHAPTER FOUR

INSTRUMENTATION

4.1 Research Engineering Block Diagram and Description 17
4.2 How does RFID works 18

4.3 System functional Requirement 20

4.4 Advantages of this project 22

CHAPTER FIVE

5.0 Conclusion 23

5.1 Recommendation 24

Reference 26

5.3 References

CHAPTER ONE

1.0INTRODUCTION

1.1 BACKGROUND OF THE STUDY

Millions of children need to be moved from home to school and vice versa every day. For parents, obtaining a safe transport for their children is a crucial issue. The students ride their bicycle getting to and from school safety. A research undertaken by the Scottish executive central research unit with purpose of increasing the proportional of non car travel to school reveals that travelling by bus or coach appears to be by for the safest mode. Statistics suggest that a child travelling by car is seven (7) times more likely to take part or be involved in a road traffic casualty than a child travelling by our statistics from U.S.A, CANADA and Australia also confirm that public transport (and school transport in particular) has a high level of safety just an in Europe.

For instance, the Australian college of Road safety notes that bus travel in the safest form of road transport, at least 14 times safer than the private car, and that the record for school bus travel in particular is very good.

Also, the research undertaken by national highway traffic safety administration in notes that when comparing the number of fatalities of children aged 5-18 years during normal school transportation hours, from 1989-1999 (school years). School buses are 87 times safes than private cars.

To help- avoid frightening and potential costly mistakes like these, this investigates an RFID enabled solution to here monitor children when they are traveling to and from school on stool buses. This system will transmit data via cell modem to allow buses to be tracked from a command center at fleet headquarters, as well as to the parent of that child.

As an option, a push button emergency alarm can be installed that will send an alarm to the monitoring station that the bus is in trouble. Another option that increased situational awareness or the addition of biometrics that, can store locally the identity picture sent periodically or on request from the command centre.

1.2 RESEARCH GOALS AND OBJECTIVE

The objective of this project is to develop an affordable integrated monitoring system to ensure our fleet security. Our goal is to develop a modular system to maximize system flexibility to best meet the need of each school district. The basic system will enable law enforcement to track vehicle using RHD and a wireless data transfer mechanism that sends data to headquarters and allow to law enforcement.

A module will be developed that will provide co-operate system for identification and tracking of individual system and driver, including where and when they board and exit the bus. A module for additional on board monitoring will developed including sensor and student data as using Biometrics.

This research showed that RFID technology is a practical option for monitoring and tracking the children their trip to and from school on school buses. Lab and field trials confirmed that the RFID tags functional well under different conditions. The reading were consistent and resulted read ranges that were acceptable within the constraints of locating children stopped into the wrong bus, left the bus and left behind in the bus, the cost associated with begging of material is relatively low. It should be noted that the work completed in this research is the first phase of the project. Future work including combining RFID tracking with an information management system will result in detailed children tracking that will provide different application to the users, Once the most phases are complete, the system will be capable of notifying parents via SMS when the child water/leaves the school, enabling school authorities, fleet owners and parent to keep track of the our online, helping transporters and authorities to plan and manage the bus routes better, saving money and ensuring smooth and quick rides to the different destinations.

1.3 DEFINITION OF TERMS

– Radio-Frequency Identification (RFID)

Radio Frequency Identification (RFID) uses electromagnetic fields to automatically identify and tracks tags attached to an object. The tags contains electronically stored information.

RFID tags are used in many industries, for example, an RFID tag attached to an automobile during production can be used to track active or battery assisted passive.

Tracker:- As a way to know geographical position

A RFID + Tracker: Complete Solution

Where about of the individual items/person can be determined where person: carrying RFID (No tracker needed)

Vehicle: Fitted with tracker.

RFID combined with tracker has a diversified utility an will be evident in the subsequent slides

User Advantages

(Benefit to parent)

You can complete traceability of childs movement from home to school and back.
You get instant information/Alerts about Arrival at pickup and drop off stops. Boarding and Alighting at school and stops entering and eating school premises.

Benefits to school management

You get exact information about the moving fleet
You get information about drives functioning i.e Breakdown alerts e.t.c

CHAPTER FIVE

5.0 CONCLUSION.

In conclusion, this system was declared to aid locating children with their parent and this research shows that RFID tracking technology is a practical option for monitoring and tracking the children during their trip to and from school on school buses.

Lab and field trials confirmed that the RFID tags functions well under different conditions. The readings were consistent and resulted read ranges that were acceptable within the constraint of locating children stepped into the bus, stepped into the wrong bus, let the bus and let behind in the bus. In addition, the cost associated with tagging of materials is relatively low. It should be noted that the work completed in this research is the first phase of this project.

Future work including RFID tracking with an information management system will result in detailed children tracking that will be capable of notifying parents via SMS when the child enters or leaves the school bus, enabling school authorities and parent to keep track of the bus online helping smooth and quick rides to different destinations.

5.1 RECOMMENDATIONS

The student’s project leading to the award of National Diploma and Higher National Diploma has been introduce so as to be able to show the extent of student’s knowledge, especially the technological students who interpret their theoretical knowledge into practice by testing, designing, and constructing variety of structural elements, to perform their functions appropriately.

Would utmost make recommendations to make the project programmers more effective.

The Polytechnics/University should help student how to operate RFID tracking system effectively not only for the purpose to excel in the project but also to work in plant in their carrier if they eventually find themselves there.
The school authority should create a committee whereby they are meant to be a watch day in the workshop; to act as maintenance officers so as to prevent unwanted accident in the workshop.
The institution should create a forum where by award will be given to student that comes out with a very good grade in the studying of RFID tracking system has a project work. This will instigate the students to show and devote much time in the studying of steam boilers.
Student should be given project outing to source specific plant for some given period of time, and which won’t affect their other programs. So as to achieve more knowledge, and get acquainted to the way things are actually done in industrial plant.
First aid treatment should be placed in the workshop for quick attention to accident and most be placed where everyone in the workshop could easily see it.
Government should create agencies whose purpose are to go around different institution to inspect the operation, maintenance, case study of RFID, and to help in the replacement of tracking system to modern ones of required.