Extraction And Stabilization Of Aloe Vera Gel From The Plant

Introduction

Aloe vera (Aloe barbadensis miller) is a perennial plant of Liliacea with turgid green leaves joined at the stem in a rosette pattern, Aloe vera leaves are formed by thick epidermis (skin) covered curticle surrounding the mesophyll, which can be differentiated into chlorenchyma cells and thinner walled cells forming the parenchyma cells (filet). The parenchyma cells contain a transparent mucilaginous jelly which is referred to as aloe Vera gel. Potential use of aloe vera products often involves some type of processing example heating, dehydrating and grinding processing may cause irreversible modification to the polysaccharides affecting their original structure which may promote important changes in the proposed physiological and pharmaceutical properties of these constituents.

However, aloe vera jel juice was not very popular due to their laxative effect and majority of them contained absolutely no active muscilaginous polysaccharides or acemannan. Colour changes have little relation to the therapeutic effectiveness of the stabilized gel and it is totally unacceptable in some products. An efficient processing technique was used to improve product quality, to preserve and maintain almost all of the bioactive chemical entities naturally present in the Aloe Vera leave during processing.

The production process of aloe vera leaves involves crushing, grinding or pressing of the entire leaf of the aloe vera plant to produce an aloe vera gel juice followed by various steps of filtration and stabilization of the gel. The resulting solution is then incorporated in or mixed with other solution or agents to produce a pharmaceutical, costmetic or food product.

1.1 Aim of Study

To extract Aloe vera gel from the plant and stabilize using sodum benzoate, citric acid and lime.

1.3 Background of Study

Aloe vera is a succulent plant of the lilly family native to the cape of good hope and growing wild in much of Africa and Madagascar. Commercial growers cultivate it in the Caribbean, the Mediterranean, Japan and the USA. It produces a ring of dagger shaped fleshy leaves that grow up from the base of plant. Each Aloe vera plant grow up to nearly 2kg in weight. It is from the leaf that the soothing aloe vera jel is extracted.

The Aloe vera plant is drought resistant and grows mainly in subtropical desert like savanna. When the leaves are cut the plant can close off it’s cell to retain fluid. Aloe vera can grow to 20meters in height but usually grows only to about 1.5meters. each plant has about 15leaves and blooms intermittently. It produces erect spikes of drooping yellow, orange or red tubular flowers on the woody stem

Russian research has shown benefits to condition other than those for which aloe vera is most well known. These include improvements in bone tuberculosis and broken bones, inflammatory gynecological conditions, paralysis caused by polio, ear, nose and throat conditions and bronchial asthma. They have also been found that aloe vera can help slow aging process[1].

Both Russia and the United States have carried out extensive research into the use of aloe vera for all types of burns[2]. They found that compounds within aloe vera can help the burn heal and can also have a cleansing and antibacterial effect[3]. The United States have developed a cream containing 70% aloe Vera juice extract that prevents partially damaged tissues from dying and allows new skin cells to close off the area, thereby promoting healthy new skin beneath the scrab rather than scar tissue.[4]

Research has also been carried out into whether Aloe vera can play a role in the treatment of cancer. Aloe vera appears to cause the release of tumor necrosis factor alpha that blocks the blood supply to cancerous growths[5]. A study in Japan showed that drinking Aloe vera juice regularly may be effective in preventing the onset of lung cancer in smokers[1]. The first recorded evidence of the healing properties of the Aloe vera are fond on ancient Egyptian texts dating from around 1500BC. The Egyptians referred to Aloe vera as the plant of immortality. Arab traders were probably responsible for the spread of Aloe vera into Persia, India and the far East.

In the first century AD, the Greek physician Dioscorrides wrote in his Material Medica that Aloe vera extract could be used to treat wounds, stomach complaints, constipation, hemorrhoids, headaches, all mouth problems, hair loss, insect bites, kidney ailments and skin irritation.[6] In Africa, aloe vera was used for stomach aches and to prevent infection from insect bites.[6] Chinese used Aloe vera for treating eczema during the sung dynasty. [8] In I India during the forth century BC, people believed that Aloe Vera grew in the garden of Eden, they called it “the silent healer” and used it to heal skin conditions and inflammation. In the early Christian era, Aloe vera could be found in all advanced medicinal texts[9].

Eventually, Aloe vera was introduced into the Americans. In Mexico, the juice was used to treat skin complaints and wounds. Aloe vera was sold in the street market of Latin America as an aphrodisiac. Jesuit Preists were encouraged to take Aloe vera with them when going to the new world to spread the bible. As the popularity of aloe vera increased during the 18th century, so trade wars occurred between the British, Spanish and Dutch to establish Aloe in the new world. During the late 18th and early 19th centuries, many wealthy collectors of exotic plants added aloe vera to their collections and many discoveries about its properties were made during this period.[10]
By late 19th century, synthetic laboratory drugs were taking procedence over botanical compounds. There was a naïve optimism that scientific advance would lead to even more effective drugs that would eventually “conquer” all diseases and herbal remedies such as Aloe vera fell from favour. Although research was carried out by the united state into the burn healing properties of Aloe vera during the 1930s to find a cure for radiation burns. It was only in the 1960s that improved techniques allowed proper stabilization of the aloe vera. Stabilization of the Aloe vera gel juice allowed it to be stored for a long period and therefore commercial production became viable. Public interest was rekindled.[11]

Previous methods of extraction concentrate only on the Aloe vera gel found in the middle of the leaf. The whole leaf processing was not used because it was difficult to prevent contamination with Aloe latex. Aloe latex is a yellow extract from the inner leaf of the plant that acts as a laxative and can cause severe cramps and diarrhoeas. The very latest processing methods now allow the whole aloe vera to be processed without the latex contamination. This is a hugely important step forward as the juice/gel can now contain the healing power of all parts of the plant rather than just the inner gel. The polysaccharide count in whole leaf juice can reach much higher values using these latest processing methods. [12]

1.3 Biological Activity of Aloe Vera

The controversy over the identity of the active substance(s) in aloe vera has not settled. Also various mechanisms have been proposed for the alleged healing properties of Aloe vera. Since no single definite active ingredient has been found. It is commonly suggested that there may be some synergitic action between the polysaccharides base and other components.[13]

According to Mackee [14] vitamin D was the healing agent but row and parks [14] reported the absence of vitamin D. Morton [15] suggested a theory starting the seeming efficacy of aloe vera pulp may be attributed to its high water content i.e 96%+, providing a means of making water available for injured tissue without scaling it off from the air. This recovery would explain the instant soothing effect of Aloe vera gel has on burns but would not account for the long term effect of healing. The action of aloe vera is simply due to its moisturizing and emollient effects, hence its use in cosmetics.

Various researchers reported that the effective component for wound healing may be tannic acids [16] and a type of polysaccharide [17]. other researchers have also reported anti-imflammatory effects of complex polysaccharides. It is logical that the mucilaginous gel of Aloe vera plant which is essentially a polysaccharide holds secrete to Aloe vera’s medicinal properties. Many researchers such as Collins[18] Fine and Brown [19]and Crew [5] have attributed pain – relieving properties to aloe vera gel. It is virtually impossible to prevent contamination during commercial extraction of Aloe vera gel. It is believed that the intact leaves anthraquinones and their derivatives may diffuse into the gel from the bundle sheath cells, this possibly supports the conclusion of Row et al.,[21] who states that the healing agent is passed from the ring into gel on standing.

The things that happen to make aloe product less desirable or cause it to become virtually non-beneficial were stem from the harvesting of the leaves processing and distribution of leaves. The fleshly removed leaves must go directly into production or must be appropriately refrigerated to prevent a loss of biological activity. Principally through the degradative decomposition of the gel matrix. The value of Aloe vera further diminishes if the processing procedures applies too much heat for too long a time. [22] Extended heating renders the product free from bacterial contamination but effectively destroys aloe’s mucopolysaccharide and consequently its efficacy

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Extraction And Stabilization Of Aloe Vera Gel From The Plant, and acknowledges the contributions of scholars who have previously conducted similar research [REV26748] …

Document Information

  • Format: DOC/PDF
  • Title: Extraction And Stabilization Of Aloe Vera Gel From The Plant:

YOU MAY LOVE THESE (Recommended)

Posted under:

To start a project on Production Of Plant Mirror Using Local Raw Material, follow these guidelines: This project “production of plane mirror using local raw material” is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material. Plane mirror is produced by casting one side of a sheet glass. Presently in Nigeria, sheet glass is not used ea…

69 Pages 1 - 6 Chapters 9,600 Words DOC/PDF Format Instant Download UPN1190

To develop a project on Problems Of Acquisition And Replacement Of Plant And Equipment In A Manufacturing Industry, follow these approaches: This research is a study of the problems of acquisition and replacement of plant and equipment in a manufacturing industry. It is aimed at examining the activities involved in the production process with a view to using it in determining whether or not resources were fully utilized. It is also ai…

94 Pages 1 - 5 Chapters 11,875 Words DOC/PDF Format Instant Download UPN490

Posted under:
Economics (1383)

To undertake a project on Monetary Policy Measure As Instruments Of Economic Stabilization, follow these effective ways: MONETARY POLICY MEASURES AS INSTRUMENTS OF ECONOMIC STABILIZATION IN NIGERIA In general, monetary policy refers to the combination of measures designed to regulates the value, supply and cost of money in an economy in cognizance with the level of economic activity. An express supply of money whic…

106 Pages 1 - 5 Chapters 14,889 Words DOC/PDF Format Instant Download UPN258

Posted under:
Banking and Finance (1684) and Economics (1383)

To write a project on Impact Of Monetary Policy Measures As An Instrument Of Economic Stabilization, follow these structure: The study examined the impact of monetary policy in stabilizing the Nigeria economy. In the model specified inflation is the regress while cash research requirement, liquidity ratio, money supply, minimum rediscount rate, interest rate are the regressors. The government employs a deliberate manip…

82 Pages 1 - 5 Chapters 8,955 Words DOC/PDF Format Instant Download UPN1915

Posted under:

To carry out a project on Extraction Of Oil From Local Seed (Groundnut Seed) And Characterization, follow these effective methods: This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis. The oil these seeds were in Enugu using solvent extraction method. Two different solvents were used…

80 Pages 1 - 5 Chapters 9,919 Words DOC/PDF Format Instant Download UPN1132

Posted under:

To start a project on Extraction And Formulation Of Perfume From Lemongrass Leaves, follow these guidelines: Perfume extraction refers to the extraction of aromatic compounds from raw materials, using methods such as distillation, solvent extraction, expression or enfleurage. The extracts are either essential oils, absolutes, concretes, or butters, depending on the amount of waxes in the extracted produ…

69 Pages 1 - 6 Chapters 1,968 Words DOC/PDF Format Instant Download UPN1129

Understand how to write the “Extraction And Characterization Of Oil From Date Seed” Project

Posted under:

To develop a project on Extraction And Characterization Of Oil From Date Seed, follow these approaches: The aim of this project is centered on the extraction and characterization of oil from date seed. The extraction is carried out with the use of a soxhlet apparatus and a solvent hexane which is chosen base on the fact that it has a very low value of toxicity and high extraction rate. The differen…

55 Pages 1 - 5 Chapters 8,574 Words DOC/PDF Format Instant Download UPN15093

Discover how to write the “Extraction And Characterization Of Oil From Cashew Nut” Project

Posted under:

To undertake a project on Extraction And Characterization Of Oil From Cashew Nut, follow these effective ways: This study was carried out to extract oils from cashew nut and to characterized oils with the view to ascertain their suitability for consumption and other uses. Soxhlet apparatus was used for its extraction using ethanol as solvent. The physical and chemical properties of the extracted oil were …

48 Pages 1 - 5 Chapters 6,190 Words DOC/PDF Format Instant Download UPN15092

Posted under:

To write a project on Effect Of Stabilization Of Selected Lateritic Soil Using Cement Lime And Bitumen, follow these structure: The soil sample used in this project were collected from Uruala, Obowo, Naze and Amuro Okigwe, and were treated with cement lime and Bitumen. From the data Obtained it is observed that sample from Okiwge and obowo are best stabilize using appropriate % of cement and lime than bitumen but soil fro…

68 Pages 1 - 5 Chapters 9,702 Words DOC/PDF Format Instant Download UPN1243

To carry out a project on Design And Fabrication Of A Pilot Production Plant For Paints Emulsion And Texcoat, follow these effective methods: The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which …

41 Pages 1 - 5 Chapters 4,968 Words DOC/PDF Format Instant Download UPN1570

Live Chat