Impact Of Different Methods Of Depreciation On The Profitability Of A Company

A Case Study Of Anammco Motor Enugu State

The main purpose of this study is to measure the impact of different methods on the profitability of accompany the differ methods of providing for depreciation has been posing a problem to many people because the understanding and the use of these methods provide varying depreciation expenses on the sane fixed asset in viler of these when profit is reported using deferred methods part the service potential of a depreciable asset is exhausted in the cost revenue generating process each period the cost of these services meets be deducted from revenue of the period in order to measure the periodic income the expired cost must be recovered before a business is considered as well as at the beginning of the period and troublesome area in accounting.
Deprecation was actually a cost of doing business executive tended to view depreciation as a matter of setting aside speciation during prosperous period for the replacement of depreciation assets.
Chapter one we examined the need for the study, finding out what impact depreciation on the company’s profitability and tax. It also looked into the significance of the study that is building funds for the study of their asset at the end of the existing asset useful life. The scope was ANAMMCO, Niger gas limited and premier Breweries Plc.
Chapter two examined and reviewed the causes of depreciation that can be physical deterioration from wear and tear, the different method of calculating depreciation. Like straight-line method, revaluation methods etc. its impact on income statement and the evaluation of depreciable methods.
Chapter three dealt with research design and methodology.
Chapter four discussed the presentation analysis and interpretation of data the different method of depreciation and tested the hypothesis stated in chapter one.
Chapter five was the findings, recommendations and the conclusion.

INTRODUCTION
PREAMBLE
This project work is aimed at critically studying the different methods of depreciation and their impact in the profitability of business enterprises.
The different methods of providing for depreciation have been posing problem to many individual because the understanding and the use of these methods provide varying depreciation expenses on the same fixed asset. In view of this, when profit is reported using different methods for a period, the reported income will vary under the different methods.
Although most of the different methods of providing for depreciation will be discussed in this work.
Parts of the service potential of a depreciable asset is exhausted in the revenue generating process each period the cost these services must be deducted from revenue of that period. In order to measure the periodic income, the expired cost must be recovered before a business is considered.
Depreciation is one of the most controversial and troublesome areas in accounting.
Depreciation was actually a cost of doing business. Business executive tended to view depreciation as a matter of setting aside something during prosperous periods for the replacement of depreciable assets. When earnings are high, large amounts of depreciation might be recorded and when earnings were low or less provision for depreciation was recorded. Today, it is universally agreed that depreciation is an expenses that must be recorded whether or not revenue is sufficient to absorb it.
Depreciation has been given different interpretations and meanings by various authors and experts in the accounting field as a result many definitions of depreciation exist as many as the authors and experts themselves.
Some of the numerous definitions of the term depreciation as defined by many authors will be examined.
The institute of chartered accountant of Canada defined depreciation as a proportionate charge of an expanse to an accounting period based the cost as other recorded value of fixed assets. Himmed Clan (third international congress on accounting defined depreciation as the price spreading the value of a fixed asset.
Montgomery (auditing theory and practice) defined depreciation as an allocation of the entire cost of depreciable assets to the operating express of a series of fiscal period.
The American Institute of Certified public Accountants defined depreciation accounting as a system of accounting which aims to distribute the cost or other basic value (if any) over the estimated useful life of the unit which may be a group of assets in a systematic and rational manner.

Depreciation is a part of the cost of a fixed asset is not recoverable on disposal and is this part of the cost of fixed assets consumed during its period of use by the firm. It is an expense, which is charged to the profit and loss account of a period before ascertaining the real net profit or loss of an enterprise.
Depreciation is sometimes divided into two classes:

INTERNAL DEPRECIATION:
Internal depreciation which arises from the operation of any cause natural to or inherent in the asset itself for instance, wear and tear of plant and machinery.

EXTERNAL DEPRECIATION:
External depreciation which arises from the operation of forces apart from the assets itself for instance obsolescence, inadequacy and decay.
Depreciation according Walter Mergs is that portion of the cost of fixed assets that is deductible from revenue for the asset services used in the operations of the business. In practice, the term depreciation is used to describe the cost of the expired services of tangible fixed assets.

1.2 STATEMENT OF THE PROBLEM
Most people are not aware of the resultant effect of adopting one depreciation method or another on the reported profits and in the net book value of assets stated in the financial statement of a business concern and so they tend to pass erroneous judgment on the profitability or performance comparison between companies by mere looking at either reported profit in the financial statement. It is therefore imperative that research be conducted to find the following problems:
1. How to determine the probable use life of an asset.
2. How to estimate the depreciation amount to be charged over its useful life.
3. What is appropriate depreciation method to be used?
4. Whether the use of varied depreciation methods by concerns of assets stated in the balance sheet at the year-end.
5. Whether the amount carried in the account of property plant and equipment and hence the depreciation charges should be reviewed periodically in the line with inflation. These are burning problems, which the researcher would find arises to.

1.3 OBJECTIVES OF THE STUDY
The general objectives of the work is assess the impact of different methods of depreciation on the profitability of a company.
The specific objective includes the following:
1. To find out what influences company’s chance of depreciation methods.
2. To find out what impact depreciation has on the company’s profitability and tax.
3. To find out other significance depreciation has on the company’s financial statement.
4. To ascertain whether proper treatment is given to depreciation accounting by the companies studied.
5. To look into the records kept in respect of plant machinery and equipment in order to secure effective control over them through proper accounting.
6. Make recommendations based on finding thereof.

1.4 HYPOTHESIS FORMULATION
For the purpose of the following hypothesis will test on generalization of the impact of different methods of depreciation on the profitability of a company.
Hi The different methods of depreciation do not have an impact on the profitability of a company.
Ho The different methods of depreciation have an impact on the profitability of a company.
Hi Depreciation does not have any effect on management decisions.
Ho Depreciation has an effect on management decisions.

1.5 THE SIGNIFICATION OF STUDY
1. this project will be useful to many companies in Nigeria in that it many companies in Nigeria in that it will provide an in sign into the effect of depreciation in income statement.
2. it enables the determine the extent to which depreciation could help to
3. Build funds for the replacement of their asset at the end of the existing asset useful life.
B Reduce tax payable to the government by reducing the company’s profit.
2 The study will also prove useful to the shareholder in that depreciation reduces the declared profit a nd the amount payable as dividend to shareholders. It has the advantage of not affecting the company’s working capital as other expense do.
3 Both the federal and state government will benefit from this study since depreciation determines the volume of the company’s profit and the amount of tax payable to the government.
The study will also portray the reason. Why our also tax law disallow depreciation, but instead provide capital allowance for the purpose of computing income tax.
4 The study will hopefully be useful to other researchers, in that it will add to the existing literature in the subject.
5 Finally the project will be useful to the researcher, in that it is presented in partial fulfillment for the award of diploma in accountancy.

1.6 THE SCOPE OF THE STUDY
The project covers the impact of different method of depreciation on profitability of a company. It includes the impact of depreciation accounting on income statement reporting in perspective. An overall evaluation of the depreciation policy and concepts of profit are included. The study area include the following selected companies:
1. Anambra Motor Manufacturing Company (ANAMMCO)
2. Niger Gas Limited Emene.
3. Premier Breweries Ply Onitsha.
The scope of this study is limited to the above areas mentioned for the purpose of effective coverage.

1.7 LIMITATIONS OF THE STUDY
In a study of this nature, a lot of limitation is bound to occur. It will be left to the researcher to strive to achieve the list he could inspite of this limitation:
They are as follows:
a. In adequate information was a limiting factor on the extent to which the researcher could go on this study.

b. Residual Value:
This could be called savage value or scrap valued by some authors and experts it is the estimated future disposal value of an asset I disposal may occur before the asset is physically worn out and such asset will therefore still have some value before that which the accountant should try to estimate. It is the value an article or asset posses for use other than to which it has already been devoted and not for resale this value can be also be amount which can reasonably be expected to be realized upon the retirement of a fixed asset.
c. Estimated Use Life:
This is the period of time the fixed asset is expected to be effectively used in the operation or activities of an enterprise this is the period beyond which it does not pay to either keep the asset in use either by repair or any other means it is the total number of services unit which may be measured in terms of years the asset is expected to be used or unit expected to be produced etc. form an assets.
The following relevant information should be considered when computing the estimated useful life of an asset.
i. Past experience with similar assets
ii. The assets present condition
iii. The enterprises repair and maintenance policy
iv. Current technology and industrial trends
v. Local technology and industrial trends.
d. Depreciable Cost:
This is the cost of an asset less its residual value. The cost of an asset means the purchased prices incurred in acquiring an asset that is original cost when the estimated residual value of an asset is dedicated from this cost that result will be depreciable cost of that asset i.e. the cost on which depreciation base since it is the cost of the asset service that would be used by a given enterprise in computing depreciation charge it is usually less than the original investment in the asset.
e. Repair: According to bulletin “F” of the U.S bureau of internal revenue repairs is defined as disbursement which neither materially adopt up to the property nor appreciably prolong its life but merely keep it in an ordinarily efficient operating condition.
f. Accumulated Depreciation: This is a compilation at any point in time of the original cost already written off as expense. In effect it show by how much the asset has fallen in value the net book value is the original cost less accumulated depreciation and this is the value recorded at the end of the accounting period in the balance sheet.
g. Profitability: In the purpose of this project profitability will be taken to be concerned with the profit and loss account which shows the earnings of a company form its activities during the year and the balance sheet which shows that financial position of the company as at the end of the accounting or financial year.

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Impact Of Different Methods Of Depreciation On The Profitability Of A Company, and acknowledges the contributions of scholars who have previously conducted similar research [REV2493] …

Title Page
Abstract
Table Of Contents
List Of Tables

Chapter One
1.0 Introduction
1.1 Preamble
1.2 Statement Of The Problem
1.3 Objectives Of The Study
1.4 Hypothesis Formulation
1.5 The Signification Of Study
1.6 The Scope Of The Study
1.7 Limitations Of The Study
Reference

Chapter Two
2.0 Literature Review
2.1 The Nature Of Depreciation Accounting
2.2 Causes Of Depreciation
2.3 Methods Of Calculating Depreciation
2.4 The Impact Of Depreciation On Income Statement
2.5 Evaluation Of Depreciation Methods
2.6 The Concept Of Profit
2.7 Definition Of Profit
2.8 Relationship Between Balance Sheet And Profit And Loss Account
2.9 Depreciation Method And Management Decision
2.10 Decline Productivity Controversy
2.11 Impact Of Inflation
2.12 Cost Of A Plant Asset
2.13 Estimated Life Of A Fixed Asset
2.14 Terminal Value Of A Fixed Asset
References

Chapter Three
3.0 Research Design And Methodology
3.1 Introduction
3.2 Instrument For Data Collection And Procedures
3.3 Sources Of Data
3.4 The Sample Size Calculations And Selection Computation Of The Sample Size
3.5 Valuation Of The Questionnaires
3.6 Questionnaires Administration And Collection
3.7 Statistical Treatment
3.8 Decision Rule
Reference

Chapter Four
4.1 Presentation Analysis And Interpretation Of Data
4.2 Bases Of Computation Using The Different Methods Of Depreciation

Chapter Five
5.0 Findings, Recommendations And Conclusion
5.1 Findings
5.2 Recommendations
5.3 Conclusion
Bibliography
Appendix 1
Questionnaires

Document Information

  • Pages: 101 Pages
  • Chapters: 1 – 5 Chapters
  • Words: 13,157 Words
  • Format: DOC/PDF
  • Time: Instant Download
  • Title: Impact Of Different Methods Of Depreciation On The Profitability Of A Company: A Case Study Of Anammco Motor Enugu State

YOU MAY LOVE THESE (Recommended)

Posted under:

To start a project on Study Of The Use Of Financial Ratios For The Assessment Of The Performance And The Profitability Of A Firm, follow these guidelines: his research work “The study of the use of financial ratios for the assessment of the performance and profitability of a firm” touched all vital aspects of ratio analysis. In addition, it identified the various kinds of ratios, their uses, those that benefits from such analysis, as well as the li…

50 Pages 1 - 5 Chapters 5,166 Words DOC/PDF Format Instant Download UPN28

Understand how to write the “Strength Development In Concrete Using Different Type Of Cement” Project

Posted under:

To develop a project on Strength Development In Concrete Using Different Type Of Cement, follow these approaches: The essence of this project work is to look into the causes of highway failure and the different types of failure which are presented along the Eliozu – New Airport road in Obio/Akpor L.G.A in River state, taken as a case study. Some factors identify as being responsible for the failure of the ch…

143 Pages 1 - 5 Chapters 18,577 Words DOC/PDF Format Instant Download UPN1267

1.1 INTRODUCTION 1.2 BACKGROUND OF THE STUDY Security, as an important fact has been discovered as the most necessary activities carried out in every organization. Because the materials of an organization or an industry determines its level of survival. Security is the duty of the management and is one of the most essential areas of stores management. It covers various areas angles including theft, fraud, stock determination, damage a […]

88 Pages 1 - 5 Chapters 9,596 Words DOC/PDF Format Instant Download UPN1172

Posted under:
1.0 INTRODUCTION 1.1 BACKGROUND OF THE STUDY During the past few year, purchasing and supply function as a discipline has changed considerably in many companies. This is reflected in the increased attention this function is receiving from manager and practioners. Considering the amount of money generally involved in the preparation and execution of purchasing and supply function decision, this is not so stranger. An effectively and ef […]

67 Pages 1 - 5 Chapters 8,333 Words DOC/PDF Format Instant Download UPN1157

To undertake a project on Role And Contribution Of Purchasing And Supply Management Of Profitability Of An Organization, follow these effective ways: The role and the contribution of Purchasing and Supply Management in the profitability of an organization is an important unit in a manufacturing industry and contribute a lot to the growth and profitability of the industry. For production to be effective and continuous there should be an efficie…

92 Pages 1 - 5 Chapters 8,622 Words DOC/PDF Format Instant Download UPN1140

To write a project on Purchasing Research As A Tool For Profitability In The Service Industry, follow these structure: Purchasing research is the systematic design, collection, analysis and reporting of data and findings relevant to a specific purchasing situation facing the company. (Koller P 2003). This study focused on purchasing research as a tool for profitability in the service industry, a case study of AII…

96 Pages 1 - 5 Chapters 11,476 Words DOC/PDF Format Instant Download UPN1125

Learn the structure to write the “Profitability And Liquidity In Commercial Bank” Project

Posted under:

To carry out a project on Profitability And Liquidity In Commercial Bank, follow these effective methods: This is a work based on a topic which has been critically viewed by many people as an area which has been under serious treat in recent years. The banking industry has for some times come under heavy supervision as to whether there should be any reliability on the industry or is it just collectin…

105 Pages 1 - 5 Chapters 13,820 Words DOC/PDF Format Instant Download UPN277

INTRODUCTION The only viable means by which any manufacturer or producer could effectively project and maintain the standard of his products or services’ patronage and awareness is by effective and continous awareness or advertisement. This awareness is what stimulates the attention of the public and then gets them attracted to your products or services. This awareness does not only tell the public that the products and services are th […]

32 Pages 1 - 5 Chapters 4,303 Words DOC/PDF Format Instant Download UPN2110

To start a project on Naira Exchange Rate Depreciation And Domestic Inflation, follow these guidelines: The research work critically examined the extent to which naira exchange rate depreciation had affected domestic inflationary rate in Nigeria between 1985 – 2000. Therefore, in this study, the researcher examined the trend of inflation and exchange and the relationship between the two variables. …

67 Pages 1 - 5 Chapters 10,372 Words DOC/PDF Format Instant Download UPN715

Understand how to write the “Marketing Research As A Tool For Increased Profitability” Project

Posted under:
Marketing (1423)

To develop a project on Marketing Research As A Tool For Increased Profitability, follow these approaches: This project work is meant to examine marketing research as a tool for increased profitability. A case study of Nigerian Bottling Company Enugu. The main objectives of this study include: – Determination of the extent marketing research can improve product quality. – To find out how marketing res…

59 Pages 1 - 5 Chapters 8,106 Words DOC/PDF Format Instant Download UPN1962

Live Chat