Construction Of Soap Cutting Table, Soap Mould And Soap Cutters

How to write the “Production Of A High Quality Bar Soap And Compare With Detergent” Project

To start a project on Production Of A High Quality Bar Soap And Compare With Detergent, follow these guidelines: The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be t…

Understand how to write the “Process And Quality Factors In Laundry And Toilet Soap Production” Project

To develop a project on Process And Quality Factors In Laundry And Toilet Soap Production, follow these approaches: This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the soap produced. These include the method used in production, types and nature of oils used, the percentage of the additives in the soap and the ratio…

Discover how to write the “Nylon Cutting And Sealing Machine” Project

To undertake a project on Nylon Cutting And Sealing Machine, follow these effective ways: This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The…

How to structure the “Formulation And Production Of Levera Soap” Project

To write a project on Formulation And Production Of Levera Soap, follow these structure: The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was …

Learn the structure to write the “Fabrication Of A Polythene Bag Sealing And Cutting Machine” Project

To carry out a project on Fabrication Of A Polythene Bag Sealing And Cutting Machine, follow these effective methods: This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame…

How to write the “Effect Of Cutting Parameters On Surface Roughness Of Mild Carbon Steel During Turning Operations” Project

To start a project on Effect Of Cutting Parameters On Surface Roughness Of Mild Carbon Steel During Turning Operations, follow these guidelines: Cutting fluid play a very important role in machining but it also brings a lot of detrimental effects such as health hazards and environmental pollutions when it handled improperly. In addition, the cutting fluids also increase the amount of machining cost since it had been issues lately of its c…

Understand how to write the “Construction of Office Table and Chairs” Project

To develop a project on Construction of Office Table and Chairs, follow these approaches: The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½ and glue 1 tin wenner 1 rod, foam ½ she…

Discover how to write the “Construction Of A Reading Table And A Chair” Project

To undertake a project on Construction Of A Reading Table And A Chair, follow these effective ways: The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, electronics, office equipments and some vital home equipmen…

How to structure the “Fabrication Of Candle Mould With Twenty Four (24) Holes” Project

How to structure the “Comparative Study Of The Effect Of Table Salt In 10% Formal Saline And Saturated Sodium Chloride Solution As Tissue Fixatives” Thesis