Effect Of Temperature On Hydrolysis Of Cellulose (Saw-Dust)

The effect of concentration of hydrochloric acid on hydrolysis of cellulose (saw-
dust) to glucose was studied on this research project and the steps obtained to
achieve this project involved treatment of saw-dust (cellulose) with different
concentrations of the acid at constant temperature of 80°𝐶 (350k) for 30mins. This
was followed by glucose analysis, some analysis or experiments were done on acid
hydrolysis in order to study the effect of (HCL) acid on the hydrolysis of cellulose
to glucose. The process used in this hydrolysis was acid hydrolysis in which HCL
acid was used at constant temperature of 80oC and the saw-dust used [was obtained
by grinding wood with saw] was weighed and mixed with water . Secondly, during
this analysis/experiment, it was observed that hydrochloric acid hydrolyzed well
from the readings gotten from each result that was carried out during the analysis.
Then lastly, glucose analysis was carried out to determine the absorbance and
glucose concentration. It was noticed that the best concentration of HCL acid
during hydrolysis yields glucose concentration of 0.127g or 1.270%.

1.1 Introduction
Cellulose is the name given to a long chain of atoms consisting of
carbon, hydrogen and oxygen arranged in a particular manner it is
a naturally occurring polymeric material containing thousands of
glucose-like rings each of which contain three alcoholic OH groups.
Its general each of which contain three alcoholic OH groups. Its
general formula is represented as (C6H1005)n. the oh-groups present
in cellulose can be esterifies or etherified, the most important
cellulose derivatives are the esters.
Cellulose is found in nature in almost all forms of plant life’s, and
especially in cotton and wood. A cellulose molecule is made up of
large number of glucose units linked together by oxygen atom. Each
glucose unit contains three(3) hydroxyl groups, the hydroxyl groups
present at carbon-6 is primary, while two other hydroxyl are
secondary. Cellulose is the most abundant organic chemical on
earth more than 50% of the carbon is plants occurs in the cellulose
of stems and leave wood is largely cellulose, and cotton is more
than 90% cellulose. It is a major constituent of plant cell walls that

1.2 Definition of Terms
Hydrolysis: means hydro (water) lysis (splitting) or breaking down of
a chemical bond by the addition of water (H2O), it is by the
introduction of the elements that make up water hydrogen and
oxygen. The reactions are more complicated than just adding water
to a compound, but by the end of a hydrolysis reaction, there will
be two more hydrogen’s and one more oxygen shared between the
products, than there were before the reaction occurred.
Hydrolysis of cellulose therefore is the process of breaking
down the glucosidic bonds that holds the glucose basic units
together to term a large cellulose molecule, it is a term used to
describe the overall process where cellulsose is converted into
various sweeteners.
Sugar: is the generalized name for a class of chemically related
sweet – flavored substances, most of which are used as food. They
are carbohydrates, composed of carbon, hydrogen and oxygen.
There are various sugar derived from different sources. Simple
sugars are called monosaccharide’s and include glucose cellos
known as dextrose, fructose and galactose. The table or granulated
sugar most customarily used as food is sucrose, a disaccharide
other disacclarides include maltose and lacoose. Chemically-
different substances may also have a sweet taste, but are not
classified as sugar but as artificial sweeteners.

1.3 STATEMENT OF THE PROBLEM
The new government policies and economy through low quality
products has imposed motivated researchers to explore the
numerous domestic, industrial and economic importance of the
Nigeria’s major waste product which is “cellulose” which forms the
bedrock of this project.
Sugar is a high demand for both domestic and industrial
applications on daily basis in homes, small and medium scale
industries etc this is why Nigeria government spends huge sums of
money on importation of sugar and sugar products to meet the
demand of citizens. Among the many processes of sugar production,
is acid hydrolysis of (cellulose) has proved to be a process which
encourages the production of high quality with minimum skill and
materials. This work is therefore an effort to encourage
industrialist, researchers, and students to carry out more intensive
studies on production of sugar from cellulose for production of
sugar and enhanced economic resources for the nation.

1.4 SCOPE AND OF STUDY LIMITATIONS
This study is aimed at estimating the impact of some areas
hindering the subject/project matter (disadvantages) the cellulose.
It is obvious that cellulose materials have been used, including
newspaper, carboard, cotton, straw, sawdust, hemp and corncob.
Monticell was insulated with a form of cellulose. Modern cellulose
insulation, made with recycled newspaper using grinding and dust
removing machines and adding a fire retardant, began in the 1950s
and came into general use in the U.S during the 1970s.
The R value Rule” placed clear limitations on the claims that
manufacturing and marketing firms can make about their product,
then also the effect of regulations by the CPSC put most of the
small producers of cellulose insulation out of business. The costs
incurred by increasing fire testing made cellulose more expensive
and the bad publicity helped decrease demand.
Cellulose also has a few disadvantages. As compared to other
insulation options, the R-value of 3.6 to 3.8 per inch is good but not
the best. Many spray foams utilizes an environmentally harmful
blowing agent, such as enovate HFC, cellulose does not.
Dust: Cellulose contains some small particles which can be blown
into the house through inadequate seals around fixtures or minute
holes.
Wet-spray drying time: We-spray provides the moisture requires a
longer drying time before the drywall/sheet-rock is applied to a
newly insulation.

1.5 OBJECTIVES
The principal aim of undertaking this project is to determine the
effect of concentration of acid on the yield of glucose production by
acid hydrolysis of cellulose.
Hydrolysis of cellulose into glucose using different concentration of
hydrochloric acid.
Calculating and quantifying the yield of glucose from hydrolysis of
cellulose using HCL acid.
In the experiment, cellulose from variety of sources will be
subjected to depolymerization conditions.

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Effect Of Temperature On Hydrolysis Of Cellulose (Saw-Dust), and acknowledges the contributions of scholars who have previously conducted similar research [REV1126] …

CHAPTER ONE
1.1 Introduction 1
1.2 Definition of Terms 3
1.3 Statement of the Problem 4
1.4 Scope and of Study Limitations 5
1.5 Objectives 6

CHAPTER TWO
2.1 Literature Review 8
2.2 History 9
2.3 Products 10
2.4 Cellulose Source and Energy Store of Crops 12
2.5 Structure and Properties 14
2.6 Biosynthesis 18
2.7 Breakdown (Cellucolysis) 22
2.8 Hemicellulose 24
2.9 Derivatives 24
2.10 Functionality 29
2.11 Occurrences 30
2.12 Classification of Cellulose 31
2.12.1 Cellulose Acetate. 32
2.12.2 Cellulose Acetate Butyrate. 32
2.12.3 Cellulose Nitrate. 33
2 12 .4 Methyl Cellulose.- 34
2.12.5 Ethyl Cellulose. 34
2.12.6 Carboxy Methyl Cellulose. 35
2.13 Regenerated Cellulose. 36
2.14 Uses of Sugar. 38
2.15 Sugar in Foods 40
2.16 Functions of Sugar. 40
2.17 Natural Polymers of Sugar. 41
2.18 Types of Sugar. 42

CHAPTER THREE
3.1 Materials and Equipment 46
3.1.1 Materials: 46
3.1.2 Apparatus: 46
3.1.3 Reagent 47
3.2 Acid Hydrolysis (Hcl) 48
3.2.1 Procedure: 48
3.2.2 Glucose Analysis Colorimetric (Using Benedict’s) Method. 49
3.2.3 Procedure: 50
The Glucose Concentration (Hcl) Was Determined Using
Beer Lambat Law. 50

CHAPTER FOUR
Results and Discussion
4.1 Results 52
4.2 Discussion 53

CHAPTER FIVE
5.0 Conclusion and Recommendation 55
5.1 Conclusion 55
5.2 Recommendation 56
References 58
Appendix A 60
Appendix B 61

Document Information

  • Pages: 69 Pages
  • Chapters: 1 – 5 Chapters
  • Words: 1,226 Words
  • Format: DOC/PDF
  • Time: Instant Download
  • Title: Effect Of Temperature On Hydrolysis Of Cellulose (Saw-Dust):

YOU MAY LOVE THESE (Recommended)

Posted under:

To start a project on Temperature And Water Requirement For Leaching of Caustic Alkalt From “NGU”, follow these guidelines: The production and analysis of “Ngu” extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project. The production was carried out by using unit operations and also using the female inflorescence of a palm fruit (Eleasis Guineesis) as raw ma…

47 Pages 1 - 7 Chapters 5,369 Words DOC/PDF Format Instant Download UPN1207

Understand how to write the “Patient Heartbeat And Temperature Monitor” Project

INTRODUCTION 1.1 BACKGROUND Heart beat rate means the number of heartbeats per unit time, usually expressed as beats per minute (bpm). The human heart pounds to pump oxygen rich blood to the muscles and carry cell waste products away from the tissues. Heartbeat rate can vary according to the demand of the muscles to absorb oxygen and excrete carbon dioxide changes such as during exercise or sleep. It also varies significantly between i […]

64 Pages 1 - 6 Chapters 6,536 Words DOC/PDF Format Instant Download UPN2073

Understand how to write the “Kinetic Study On Hydrolysis Of Cellulose (Saw-Dust)” Project

Posted under:

To develop a project on Kinetic Study On Hydrolysis Of Cellulose (Saw-Dust), follow these approaches: This research project studied on the kinetics of hydrolysis of cellulose to glucose. The steps employed to achieve this project involved extraction of cellulose from sawdust and subsequently, hydrolysis of starch to simple sugar. This was followed by glucose analysis. Different experiments were c…

59 Pages 1 - 5 Chapters 2,399 Words DOC/PDF Format Instant Download UPN1146

To undertake a project on Isolation And Performance Evaluation Of Saccharomyces Cerevisiae From On Palm Wine Elaels Guinneensis At Different Temperature Of Proofing During Bread Making, follow these effective ways: Saccharomyces cerevisiae was isolated from the fermenting sap of flaeis guinneensis. The yeast isolate was used in dough proofing at different temperatures. The samples B, C, D, E, and F, (containing the same ingredients) were leavened at 200 c, 250 c, 300 c and 40 c respectively. Similarly, samp…

57 Pages 1 - 5 Chapters 7,490 Words DOC/PDF Format Instant Download UPN2086

To write a project on Effect Of Temperature On The Viscosity Of Palm Kernel Oil, A-Z Oil, Red Oil And Water, follow these structure: A study was conducted to investigate the relationship between temperature (20 oC to 100 oC) on the viscosities palm kernel oil, a-z oil, red oil and water. The viscosities of this different vegetable oil and water were determined using Model 3500LS viscometer, at a shear rate of 30 rpm. The mean …

63 Pages 1 - 5 Chapters 6,310 Words DOC/PDF Format Instant Download UPN4062

Posted under:

To carry out a project on Design And Simulation Of A Personal Computer Temperature Control System, follow these effective methods: Temperature determines the survival of all natural creatures and as well the operational fitness of all scientific invention, it is quite important to every aspect of human endeavor and its control is as important as the temperature itself. This research work centers its study on temperature and …

45 Pages 1 - 7 Chapters 4,094 Words DOC/PDF Format Instant Download UPN1563

How to write the “Design And Fabrication Of A Dust Extractor” Project

Posted under:

To start a project on Design And Fabrication Of A Dust Extractor, follow these guidelines: Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most factories,…

40 Pages 1 - 5 Chapters 4,560 Words DOC/PDF Format Instant Download UPN1567

To develop a project on Design And Construction Of A Wireless Temperature Telemetry Device, follow these approaches: This project outlines the development of a wireless temperature telemetry device that integrates a programmed microcontroller, a temperature sensor, RF transmitter and receiver modules, and an LCD display as its core components. The device is structured into two main segments: the transmitter and…

68 Pages 1 - 5 Chapters 7,366 Words DOC/PDF Format Instant Download UPN3827

To undertake a project on Design And Construction Of A Temperature Based Fan Speed Control And Monitoring With Arduino, follow these effective ways: This work is on temperature based fan speed control and monitoring system. This device is designed with Arduino microcontroller which is quite useful for conference halls, auditoriums, cinema halls, and other commercial organizations where many people gathered together, and lot of fans are requir…

50 Pages 1 - 5 Chapters 7,015 Words DOC/PDF Format Instant Download UPN3189

Live Chat