Investigation On The Characteristics Of Cornstalk Ash Blended Cement

Analysis of investigation on the characteristics of cornstalk blended ash cement was carried out based on the interest of coming out with a good pozzolanic material with all required cement properties. Hence,the supposed competitive demand relationship between cement products in construction works has been majorly wined by cement and this makes people to depend mostly on it despite the increase in price and some with inadequate properties.
In an attempt to reuse and convert agro wastes into useful materials for the construction industry, this research considered the application of corn stalk ash (CSA) as partial replacement for ordinary Portland cement (OPC) in the production of concrete cubes.
The study investigated the oxide composition of CSA to ascertain its suitability as a pozzolanic material. Some properties of cement with CSA as a replacement for OPC were examined.
The results showed that CSA is not a good pozzolana as it does not satisfy the requirement for use as a pozzolana according to ASTM C618(2005). The compressive
strength of the specimens with replacement levels at 10% and 20% cured for periods of 7–28 days was lower at early curing time but improved significantly at later age.10% replacement level did not show increased strength compared to 20% CSA at 28 days curing period. Density decreased withincreasing ash content, water absorption rate increased with increased CSA contents, while abrasionresistance increased with increasing amount of CSA substitutions. The test results revealed that
CSA concrete cubes can attain higher strength than the conventional ones at longer curing periods,due to its pozzolanic reactions.

INTRODUCTION
vii. Background to the study
Various blends of cement utilized in construction are portrayed by their physical properties. Some key parameters control the nature and quality of cement. The physical properties of good cement are based on; Fineness of cement, Soundness, Consistency, Strength, Setting time, Heat of hydration, Loss of ignition, Bulk density, Specific gravity (Relative density). In addition, cement has a very high cost in many developing countries like Nigeria and its usage cannot be sustained. The need for moderate structure materials in giving satisfactory lodging to people of the world has turned into the real worry of researchers.The expense of traditional structure materials keep on expanding as most of the populace keeps on falling beneath the destitution line. This consequently requires the look for elective neighborhood materials as aggregate or fractional swap for concrete (Adesanya and Raheem, 2009; Akinwumi and Aidomojie, 2015; Raheem &Adedokun 2017). The research has led to the discovery of the potentials of using industrial by-products and agricultural wastes as replacement of some cement materials.Agricultural and industrial wastes possess pozzolanic properties used in cement replacement.The application of agro and industrial wastes in the production of cement is an environmentally friendly method of disposal of large amounts of substances that would have constituted pollution to land, water and air. The agricultural and industrial wastes that possessed pozzolanic characteristics and which had been studied and applied as partial replacements for cement are Rice husk ash [6-9], Corn cob ash [4, 10-12], Waste burnt clay [13-14], Hair fibre [15] and Saw dust ash [16-17]. The saw dust ash (SDA) which has been proven to be a pozzolanic material was used as a partial substitution for OPC in this study. Many researchers have argued that concrete is one of the major materials used for radiation protection in facilities. The radiation protection feature of concrete depends on its components. Cement production is one of the important sources of carbon dioxide emission to the atmosphere. CO2,which is a greenhouse gas, contributes about 65% of global warming (Vijayakumar, 2013; Raheem &Adedokun 2017). The high energy demand as well as the emission of carbon dioxide, which caused global warming and depletion of limestone deposits are the major challenges associated with cement production.
In the recent years, there is great interest in replacing a long time used materials in concrete structure by new materials to produce cheaper, harder and durable concrete.Abdelrahman& El-Awney (2015).The raw materials for cement production are limestone (calcium), sand or clay (silicon), bauxite (aluminum) and iron ore, and may include shells, chalk, marl, shale, clay, blast furnace slag, slate. Chemical analysis of cement raw materials provides insight into the chemical properties of cement.
Corn, also known as maize, is one of the most successful cereal grasses of all time. It has been under human cultivation for over 10,000 years and has spread itself into every niche of commercial agriculture (Adesanya, & Raheem (2009). Maize crop started as a subsistence crop in Nigeria and has gradually risen to a commercial crop on which many agro-based industries depend on as raw materials (Iken, and Amusa, 2014).Corn stalk is a waste product obtained from maize plant, which is the major cereal crop produced in sub-Saharan Africa.Therefore, this research investigated the use of Corn stalk as a partial replacement for ordinary Portland cement in the production of concrete cubes. It includes the determination of the oxide,composition of the CSA, evaluation of the compressive strength, density, water absorption,crushing strength of the concrete and the abrasive resistance of the concrete cubes.
viii. Problem statement
A major challenge in the constructions in the world today is access to good and quality cements with right proportions of its physical properties.The high price of good cement with balance property ratio has made it difficult for people to acquire it, hereby leading to usage of poor quality cement which later affect the construction.This study examined the physical properties of ordinary cements alongside blended cornstalk ash and how it improved the physical properties without unnecessary increase in the cost for effective and standard construction.

ix. Aim of the study
The aim of this study is to investigate the characteristics of corn stalk blended cement as a partial replacement for ordinary portland cement.
x. Objectives of the study
The main aim of this study is to investigate the characteristics of corn stalk blended cement as a partial replacement for ordinary portland cement while the objectives of the study are:
• To ascertain the characterization of corn stalk ash.
• To determine of the effects of corn stalk ash on physical and mechanical properties of blended cement mortar.

xi. Justification
There were several motivations for this study. Although few studies have investigated on things related to the properties of cornstalk ash and other supposed waste of agricultural materials. To the best of my knowledge, there was no definite assurance of complete adequate physical properties in ordinary cement until now.Additionally, analyzing a good access and usage for construction will provide better constructions as well as reducing the number of collapse building in the world.Addition of blended corn stalk ash has further enhanced the physical properties generating a better result for construction at a lower price. In an attempt to reuse and convert agro wastes into useful materials for the construction industry, several research had been carried out on the application of corn stalk ash (CSA) as partial replacement for ordinary Portland cement. The study investigated the characteristics of corn stalk ash blended cement and ascertain its suitability as a pozzolanic material.

xii. Scope
This study centers on the characteristics of corn stalk ash blended cement. Base on the limitation of the study, this research investigated the use of Corn stalk as a partial replacement for ordinary Portland cement in the production of concrete cubes. It includes the determination of the oxide, composition of the CSA, evaluation of the compressive strength, density, water absorption, crushing strength of the concrete and the abrasive resistance of the concrete cubes.

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Investigation On The Characteristics Of Cornstalk Ash Blended Cement, and acknowledges the contributions of scholars who have previously conducted similar research [REV2345] …

Title page
Certification
Dedication
Acknowledgement
Abstract
Table of Contents
List of Tables
List of Figures

CHAPTER ONE:
INTRODUCTION

i. Background to the study
ii. Problem statement
iii. Aim of the study
iv. Objectives of the study
v. Justification
vi. Scope

CHAPTER TWO:
LITERATURE REVIEW

2.0.Introduction
2.1.Corn and Corn Cultivation
2.2.Corn and Corn Stalk
2.3.Chemical Composition of Corn Stalk
2.4.Corn Stalk Ash blended Cement and Construction Industry
2.5.Brief description of Cement
2.6.Chemical Properties of Cement
2.7.Lafarge Cement
2.8.The Need for Corn Stalk Ash Blended Cement
2.9.Empirical Study

CHAPTER THREE :
METHODOLOGY

3.1.Experiment Site
3.2.Compressive Strength
3.3.Chemical Analysis
3.4.Physical Analysis

CHAPTER FOUR:
RESULTS AND DISCUSSION

CHAPTER FIVE:
CONCLUSION AND RECOMMENDATION
5.0.Conclusion
5.1.Recommendation
REFERENCES
APPENDIX
Appendix A: Getting Corn Stalk from Field
AppendixB: Corn Stalk blended Ash
AppendixC: Crushing Machine
AppendixD: Concrete Cubes after 28days Curing
AppendixE: Alpan Machine
AppendixF: Surface Area Machine
AppendixG: Burning of Corn Stalk into Ash

Document Information

  • Pages: 66 Pages
  • Chapters: 1 – 5 Chapters
  • Words: 10,012 Words
  • Format: DOC/PDF
  • Time: Instant Download
  • Title: Investigation On The Characteristics Of Cornstalk Ash Blended Cement:

YOU MAY LOVE THESE (Recommended)

Posted under:

To start a project on Effects Of Sugar Cane Bagasse Ash As Suplementary Cementitious Material In Production Of Concrete, follow these guidelines: Sugarcane Bagasse is the fibrous residue leftover when sugarcane is squeezed for its juice. Bagasse ash is obtained by subjecting Bagasse to calcinations using furnace. This work is aimed tat using Bagasse Ash as a replacement in the production of concrete. The bagassewas collected from dumped in…

62 Pages 1 - 5 Chapters 10,307 Words DOC/PDF Format Instant Download UPN2291

Understand how to write the “Strength Development In Concrete Using Different Type Of Cement” Project

Posted under:

To develop a project on Strength Development In Concrete Using Different Type Of Cement, follow these approaches: The essence of this project work is to look into the causes of highway failure and the different types of failure which are presented along the Eliozu – New Airport road in Obio/Akpor L.G.A in River state, taken as a case study. Some factors identify as being responsible for the failure of the ch…

143 Pages 1 - 5 Chapters 18,577 Words DOC/PDF Format Instant Download UPN1267

Posted under:

To undertake a project on Evaluation Of Mechanical Properties Of Palm Oil Fuel Ash (Pofa) Blended – Granite – Gravel Concrete, follow these effective ways: Utilizing Palm Oil Fuel Ash (POFA) in concrete mix is a major way of turning waste to wealth. Gravel as an aggregate is cheaper than granite. Thus, obtaining an optimum combination of these materials in achieving a maximum compressive strength in concrete will go a long way in helping the constru…

71 Pages 1 - 5 Chapters 11,850 Words DOC/PDF Format Instant Download UPN2295

Posted under:

To write a project on Effect Of Stabilization Of Selected Lateritic Soil Using Cement Lime And Bitumen, follow these structure: The soil sample used in this project were collected from Uruala, Obowo, Naze and Amuro Okigwe, and were treated with cement lime and Bitumen. From the data Obtained it is observed that sample from Okiwge and obowo are best stabilize using appropriate % of cement and lime than bitumen but soil fro…

68 Pages 1 - 5 Chapters 9,702 Words DOC/PDF Format Instant Download UPN1243

Posted under:

To carry out a project on Comparing The Strength As Blocks Made From Cement And Lateritic Soil, Cement And Red Earth, Laterite, Sand And Red Earth, follow these effective methods: This case study is “comparing the strength of blocks made from: cement stabilized laterite blocks, cement stabilized red earth blocks and sand, red earth and laterite blocks and mud blocks dried in the kiln. This project implement the following analysis (1) To effect reduction to the rise in mark…

27 Pages 1 - 5 Chapters 3,455 Words DOC/PDF Format Instant Download UPN1232

Posted under:

To start a project on Comparative Analysis Of Coal, Fuel Oil And Natural Gas For Cement Production, follow these guidelines: This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven cement manufacturing industries in Nigeria, three industries u…

68 Pages 1 - 5 Chapters 1,353 Words DOC/PDF Format Instant Download UPN1054

Understand how to write the “Alternative Raw Material Sources For Cement Production” Project

Posted under:

To develop a project on Alternative Raw Material Sources For Cement Production, follow these approaches: It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement…

53 Pages 1 - 5 Chapters 6,583 Words DOC/PDF Format Instant Download UPN1022

Live Chat