Structural Detailing In Reinforced Concrete Of A Three Bedroom Detach Duplex

Chapter One

1.0 INTRODUCTION:

This chapter introduces the Structural Detailing In Reinforced Concrete Of A Three Bedroom Detach Duplex and its relevance, states the research problems, research questions, and objectives, provides a background of the study, and should also include the research hypothesis [INTRO21944]…

Chapter Two: Literature Review

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Structural Detailing In Reinforced Concrete Of A Three Bedroom Detach Duplex, and acknowledges the contributions of scholars who have previously conducted similar research [REV21944] …

Document Information

  • Format: DOC/PDF
  • Title: Structural Detailing In Reinforced Concrete Of A Three Bedroom Detach Duplex:

YOU MAY LOVE THESE (Recommended)

How to write the “Effects Of Sugar Cane Bagasse Ash As Suplementary Cementitious Material In Production Of Concrete” Project

Posted under:
Agricultural Science (690) and Civil Engineering (215)

To start a project on Effects Of Sugar Cane Bagasse Ash As Suplementary Cementitious Material In Production Of Concrete, follow these guidelines: Sugarcane Bagasse is the fibrous residue leftover when sugarcane is squeezed for its juice. Bagasse ash is obtained by subjecting Bagasse to calcinations using furnace. This work is aimed tat using Bagasse Ash as a replacement in the production of concrete. The bagassewas collected from dumped in…

62 Pages 1 - 5 Chapters 10,307 Words DOC/PDF Format Instant Download UPN2291

Read this project

Understand how to write the “Structural Reinforcement Detailing Of A Single Storey Residential Building With Retaining Wall” Project

Posted under:
Building Technology (202) and Civil Engineering (215)
INTRODUCTION Before a designer can relate his requirements dearly in a construction industry, a drawing is to be prepared; this is because the drawing serves as a general means of communication. Thus, the drawing is adopted mostly, then other means of communication in engineering sectors. A structured engineer mostly engages himself in designs on construction of structures. Like roads, bridges, railways, dams, buildings and other publi […]

28 Pages 1 - 5 Chapters 3,114 Words DOC/PDF Format Instant Download UPN1272

Read this project

Understand how to write the “Structural Detailing Of Two Storey Building” Project

Posted under:
Building Technology (202) and Civil Engineering (215)
INTRODUCTION In other to provide information to contractors in a construction industry for works to be carried out on sites, drawings are produce, which serves as means of communication are used by designers in every engineering specters. For those reason, the works are mostly work of a structural engineer to design a construction of structure for sheltering to be completed, such as road, bridges, railways, dams, buildings and other re […]

26 Pages 1 - 6 Chapters 3,136 Words DOC/PDF Format Instant Download UPN2421

Read this project

Understand how to write the “Structural Detailing Of A Reinforced Concrete Structure – Duplex” Project

Posted under:
Building Technology (202) and Civil Engineering (215)
INTRODUCTION The work in the construction industry involves the client, the Architect, the Engineer, the quantity surveyor and the builders. A structural project is initiated by the Engineer (civil Engineer). The process of designing begins with the enginer’s appreciation of the client’s requirements. After the specification given to the engineer by architect according to the requirement of the client, the engineer develops different s […]

39 Pages 1 - 6 Chapters 4,108 Words DOC/PDF Format Instant Download UPN1270

Read this project

Understand how to write the “Strength Development In Concrete Using Different Type Of Cement” Project

Posted under:
Civil Engineering (215) and Soil Science (9)

To develop a project on Strength Development In Concrete Using Different Type Of Cement, follow these approaches: The essence of this project work is to look into the causes of highway failure and the different types of failure which are presented along the Eliozu – New Airport road in Obio/Akpor L.G.A in River state, taken as a case study. Some factors identify as being responsible for the failure of the ch…

143 Pages 1 - 5 Chapters 18,577 Words DOC/PDF Format Instant Download UPN1267

Read this project

Discover how to write the “Foreign Investment Under Structural Adjustment Programme (SAP)” Project

Posted under:
Accounting (2175) and International Business (17)
INTRODUCTION According to annual report of the Central Bank of Nigeria, the Nigeria economy has performed less well in the 1980’s than the 1970’s. Much of the growth in both periods was based on performance of the oil sector. By 1970 oil output stood at 558 million barrels and increased to 823 million barrels by 1973. Between 1975 – 1985, oil output per day averaged between 1.8 and 2.3 million barrels respectively. With the dramatic ri […]

75 Pages 1 - 5 Chapters 10,044 Words DOC/PDF Format Instant Download UPN206

Read this project

Discover how to write the “Evaluation Of Mechanical Properties Of Palm Oil Fuel Ash (Pofa) Blended – Granite – Gravel Concrete” Project

Posted under:
Civil Engineering (215)

To undertake a project on Evaluation Of Mechanical Properties Of Palm Oil Fuel Ash (Pofa) Blended – Granite – Gravel Concrete, follow these effective ways: Utilizing Palm Oil Fuel Ash (POFA) in concrete mix is a major way of turning waste to wealth. Gravel as an aggregate is cheaper than granite. Thus, obtaining an optimum combination of these materials in achieving a maximum compressive strength in concrete will go a long way in helping the constru…

71 Pages 1 - 5 Chapters 11,850 Words DOC/PDF Format Instant Download UPN2295

Read this project

How to structure the “Effects Of Salt Water On Concrete” Project

Posted under:
Civil Engineering (215)

To write a project on Effects Of Salt Water On Concrete, follow these structure: This project is carried out to know the effects of salt water on concrete. Salt water has salinity of about 3.5%. in that, about 78% is sodium chloride and 15% is chloride and sulphate of magnesium. The result gotten from the experiment being carried out shows different result from the mix design…

85 Pages 1 - 6 Chapters 11,565 Words DOC/PDF Format Instant Download UPN1247

Read this project

Learn the structure to write the “Effects Of Aggregate Sizes On The Concrete Strength” Project

Posted under:
Civil Engineering (215)

To carry out a project on Effects Of Aggregate Sizes On The Concrete Strength, follow these effective methods: In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must hsve to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite)…

29 Pages 1 - 7 Chapters 3,088 Words DOC/PDF Format Instant Download UPN1244

Read this project

How to write the “Effect Of Admixtures On Properties Of Concrete” Project

Posted under:
Civil Engineering (215)

To start a project on Effect Of Admixtures On Properties Of Concrete, follow these guidelines: The project titled “The effect of admixtures on properties of concrete: case study of sugar, cow bone ash, groundnut shell ash, and lime stone powder” was carried out with the aim of knowing the effect the of the various types of admixtures used on the properties of concrete, in term of the worka…

80 Pages 1 - 5 Chapters 13,273 Words DOC/PDF Format Instant Download UPN2283

Read this project
Live Chat