Construction Of An Intruder Alarm System
The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all
about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of today can produce (construct) things that will help the economic and growth in developing this country is technology
The intruder alarm system uses electric component to achieve the alarm sound, these components are integrated circuit (ICI,) Register, capacitors and speaker which when combined together it give an alarm system that can be used in houses, industry and commercial company. And how it can be operated. This project does a long way to give evidence and show that it can be use in the economic in favour of electronics and its usefulness in our present life days. WE suggest that this our project should be looked into by the school administration to see the possibilities of producing this alarm system in a commercial has been made by so doing we will help encourage our nations policy indigenous technology
INTRODUCTION
As the world is developing the need for electronics in human endevour is now taking a lager scope. With the inventions of certain electronic gadgets in our society today. Certain activities become easily handed for example; in communication when the telephone plays a path. In places where safety is needed on alarm system will be of much important. The application of electronic in this modern age is simply inexhaustible and this group take more interest in the case of burglary in homes, cars and industry. The selection of a proper alarm is not a simple matter, because the need of each individual home owner or businessman is different like a set of finger prints.
Some factors and questions which must be answered when selecting an alarm system includes:
a) What system needed to be protected?.
b) What type of senior are needed?.
c) The method of transmission needed forth alarm signal.
The purpose of producing the alarm system is to limit the effect of the criminology in the society by informing us that our properties are in danger. All these will bring alarm the way by which criminal break into private properties by scaring them away once the alarm is trigger on. The type of alarm system been built is called INTRUDER ALARM SYSTEM and it is simple but effective alarm circuit which can reset its self after a time that which have been selected. It has normally closed and normally open triggers which make this door as a switch so as to triggers. It on a 555 timer so that alarm will reset itself after a certain amount of time. The time is varied according to the resister and capacitor been used in the circuit. The alarm has a switch, which we can replace with a key switch to make it more secure and we can change the trigger to other top of the door or window sluitchep too. The alarm uses relay, which is connected to a siren (speaker) but it can be replaced with speaker. The circuit is running off 12volts but can be range from 4 – 16volts.
2.0 INTRODUCTION:
This chapter provides the background and context of the research problems, reviews the existing literature on the Construction Of An Intruder Alarm System, and acknowledges the contributions of scholars who have previously conducted similar research [REV2174] …
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table Of Contents
Chapter One
1.1 Introduction
Chapter Two
2.1 Block Diagram Circuit Implementation Of Proposal Intruder Alarm Unit
2.2 Power Supply Section (Alternating Current)
2.3 Rectification
2.4 Regulated Power Supply
Chapter Three
3.1 Application Of 555 Timing Circuit
3.2 Monostable Or One Short And Astable Mode
3.3 Alarm Section
3.4 Application
3.5 Audio Amplifier
1.6 Amplifier Coupling
1.7 Amplifier Section
1.8 Complete Circuit
Chapter Four
4.1 Loved Speaker
4.2 Basic Moving Coil Loved Speaker
Chapter Five
5.1 Construction Of An Intruder Alarm System
5.2 System Construction
5.3 Function Of The Component
5.4 Operation Of The System
Chapter Six
6.1 Recommendation/Conclusion
6.2 Conclusion
Reference