Design And Construction Of A Solar Street Light

This project work is titled design and construction a solar Street Light system. Stand-Alone PV street light System supply an alternative means of electrification. A street lighting is any electrical lighting that is fixed in the road for the illumination of such road or a Street light is a raised source of light on the edge of a road or walkway, which is turned on or lit at a certain time every night using solar energy (solar panel) as the primary power supply.

In this device, the solar energy is tapped and converted directly in to electricity by the solar panel (photovoltaic cell) which is being used to power a solar street light. The battery stores the excess solar energy during the day which the charge controller prevents the battery from overcharging and also charges the battery. This project unveils the design and construction of a solar energy street light system with dust to dawn operation with the aid of tight dependent resistor (LDR). The basic system components include a 50watt solar panel, 100Ah solar battery, 12 volt charge controller, 15watt energy saving bulb 3.5meter pole and interconnecting cables.

1.0 INTRODUCTION:

This chapter introduces the Design And Construction Of A Solar Street Light and its relevance, states the research problems, research questions, and objectives, provides a background of the study, and should also include the research hypothesis [INTRO3272]…

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Design And Construction Of A Solar Street Light, and acknowledges the contributions of scholars who have previously conducted similar research [REV3272] …

5.1 CONCLUSION
Street lighting is any electrical lighting that is fixed in the road for the illumination of such road or is an electrical device used to create artificial light by use of an electric lamp that is used in the road. All street light fixtures have a fixture body and a light socket to hold the lamp and allow for its replacement.
Street lighting can illuminate your road; it can help you to see who is calling at night and deter criminals from lurking; it can allow you to make the most of a patio during warm summer nights; and it can create dramatic visual effects of light and shadow among the plants.
Major advantages of street lighting includes: prevention of accidents and increase in safety. Studies have shown that darkness results in a large number of crashes and fatalities, especially those involving pedestrians; pedestrian fatalities are 3 to 6.75 times more likely in the dark than in daylight. External lighting has been found to reduce pedestrian crashes by approximately 50%.

5.2 RECOMMENDATION
This project is designed to be used in our road where the need for illumination is needed. And should be used and maintain by a qualified personnel.
Working on this topic as my project is a good idea and it comes at the right time. I am suggesting that this particular topic should also be given to other students both in higher and lower class.

Document Information

  • Pages: 53 Pages
  • Chapters: 1 – 5 Chapters
  • Words: 942 Words
  • Format: DOC/PDF
  • Time: Instant Download
  • Title: Design And Construction Of A Solar Street Light:

YOU MAY LOVE THESE (Recommended)

Posted under:
Basic Science (7) and Education (1662)

To start a project on Solar Technology, An Alternative Source Of Energy For National Development, follow these guidelines: This research was carried out to understand solar technology: An alternative source of energy for national development. The study was based on the pursuance of basic objectives to ascertain the present state of power generation and supply in Nigeria, to examine the possibility of reviving the ene…

52 Pages 1 - 5 Chapters 10,044 Words DOC/PDF Format Instant Download UPN2255

Understand how to write the “Design And Fabrication Of A Solar Powered Digital Street Clock” Project

Posted under:

To develop a project on Design And Fabrication Of A Solar Powered Digital Street Clock, follow these approaches: The design of the PIC microcontroller LED clock consists of few components that implement a solar powered digital street clock using LED display pattern. In this paper the LED clock was designed with 12 red LEDs in the outer circle, 12 green LEDs in the inner circle and four centralized yellow LE…

42 Pages 1 - 5 Chapters 7,536 Words DOC/PDF Format Instant Download UPN4296

Discover how to write the “Solar Outdoor Surveillance CCTV Camera” Project

Posted under:

To undertake a project on Solar Outdoor Surveillance CCTV Camera, follow these effective ways: The implementation and use of an outdoors solar powered surveillance (Closed Circuit Television technology) in societies across the globe has become a standard and reliable way of securing out environment. Solar powered outdoors surveillance CCTV camera is a solar-powered wireless smart camera ne…

50 Pages 1 - 5 Chapters 7,823 Words DOC/PDF Format Instant Download UPN4360

How to structure the “Installation Of Solar Battery” Project

Posted under:

To write a project on Installation Of Solar Battery, follow these structure: Batteries are what make a solar energy system an off-grid solar system. Without adequate storage, the energy generated is fed into the house and used or not used and wasted. Batteries enable you to take generated energy and store it for later use. The purpose of this study is to explain the insta…

48 Pages 1 - 5 Chapters 6,592 Words DOC/PDF Format Instant Download UPN4605

Learn the structure to write the “Design And Installation Of 200 Watt Solar Power System” Project

To carry out a project on Design And Installation Of 200 Watt Solar Power System, follow these effective methods: The 200W solar system was determined by load assessment, solar panel number determination, battery requirement and then inverter sizing. A complete solar panel rated at 200w was however purchased, together with 2 no. 150A solar battery, 1500W inverter and also 10A charge controller. These were as…

44 Pages 1 - 7 Chapters 5,111 Words DOC/PDF Format Instant Download UPN2113

How to write the “Design And Implementation Of A Solar Panel” Project

Posted under:

To start a project on Design And Implementation Of A Solar Panel, follow these guidelines: Sunlight is a form of radiant energy that travels to the earth as electromagnetic waves. In reality, the light we see is just a small part of the energy we receive from the Sun. The radiant energy from the Sun covers the full breadth of the electromagnetic spectrum. Using solar technology, we are…

38 Pages 1 - 5 Chapters 5,801 Words DOC/PDF Format Instant Download UPN3508

Posted under:

To develop a project on Design And Implementation Of A Four Way Traffic Light Control Circuit, follow these approaches: This work has been aimed at efficient means of controlling the traffic effectively for twenty-four hours. As the world is growing technologically more and more vehicles jump into the public road adding to the already existing number. Consequently, more efficient way of controlling the traffics be…

46 Pages 1 - 5 Chapters 5,589 Words DOC/PDF Format Instant Download UPN2179

Discover how to write the “Design And Construction Of Traffic Light” Project

To undertake a project on Design And Construction Of Traffic Light, follow these effective ways: This project traffic light is design for the safety ness of vehicles our the road. It is a very destroy loop and sensor that which coordinate the system when the driver encounter long sharing of green light. The traffic light is consist of two more chamber or circuit red and green or amber/yellow…

28 Pages 1 - 10 Chapters 2,923 Words DOC/PDF Format Instant Download UPN2183

How to structure the “Design And Construction Of Solar Refrigerator System” Project

Posted under:

To write a project on Design And Construction Of Solar Refrigerator System, follow these structure: This paper presents the design of a solar powered refrigeration system. The design of the system takes into account the solar sorption principles which include both the absorption and adsorption. The study identified major parts of solar refrigerator such as the solar panel, charge controller, in…

40 Pages 1 - 5 Chapters 5,830 Words DOC/PDF Format Instant Download UPN4380

Learn the structure to write the “Design And Construction Of Solar Charge Controller Of 12V/60A” Project

To carry out a project on Design And Construction Of Solar Charge Controller Of 12V/60A, follow these effective methods: Solar charge controller limits the rate at which electric current is added to or drawn from solar panel to electric batteries. It prevents overcharging and may protect against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely…

43 Pages 1 - 5 Chapters 6,602 Words DOC/PDF Format Instant Download UPN2925

Live Chat