Design And Construction Of Sound Controlled Lights Circuit

ABSTRACT

This sound controlled lights circuit design is used to control the brightness of the lights attached to it in sync with the sound that is being capsulated by its microphone. This electronic circuit design is very common in disco houses, bars, parties.

Usually, sound controlled lights are just connected in parallel with the loudspeakers. The power supply part is on the left of the electric microphone amplifier and the light controller part is on the right. The capacitors C2 and C3 are the capacitive voltage divider and reduces the power supply level. Diodes D1 and D2 rectify the positive swing of the AC voltage. The network composed of L1 and C1 protects the power line from voltages surges. In this circuit design, an electric microphone is being used. Take note that there are 2 types of electric microphone. The first type has three pins for power, ground, and output. The second type has only two pins. The second type is used for this circuit.

TABLE OF CONTENTS

COVER PAGE

TITLE PAGE

APPROVAL PAGE

DEDICATION

ACKNOWELDGEMENT

ABSTRACT

CHAPTER ONE

1.0      INTRODUCTION

1.1      BACKGROUND OF THE PROJECT

  • PURPOSE OF THE PROJECT
  • AIM OF THE PROJECT
  • OBJECTIVE OF THE PROJECT
  • PURPOSE OF THE PROJECT
  • LIMITATION OF THE PROJECT
  • ADVANTAGES OF THE PROJECT
  • PROBLEM OF THE PROJECT
  • APPLICATION OF THE PROJECT
  • RESEARCH QUESTION
  • PROJECT ORGANISATION

CHAPTER TWO

LITERATURE REVIEW

  • OVERVIEW OF THE STUDY
  • REVIEW OF THE RELATED STUDY

CHAPTER THREE

3.0     CONSTRUCTION METHODOLOGY

3.1      BASIC OF THE SYSTEM

3.2      BLOCK DIAGRAM OF THE SYSTEM

3.3      SYSTEM OPERATION

3.4      CIRCUIT DIAGRAM

3.5      CIRCUIT DESCRIPTION

3.6DESCRIPTION OF COMPONENTS USED

3.7      POWER SUPPLY UNIT

CHAPTER FOUR

4.0      TESTING AND RESULTS

  • CONSTRUCTION PROCEDURE AND TESTING
  • INSTALLATION OF THE COMPLET DESIGN
  • ASSEMBLING OF SECTIONS
  • TESTING OF SYSTEM OPERATION
  • COST ANALYSIS

CHAPTER FIVE

  • CONCLUSION
  • RECOMMENDATION
  • REFERENCES

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Design And Construction Of Sound Controlled Lights Circuit, and acknowledges the contributions of scholars who have previously conducted similar research [REV3275] …

Document Information

  • Format: DOC/PDF
  • Title: Design And Construction Of Sound Controlled Lights Circuit:

YOU MAY LOVE THESE (Recommended)

Posted under:

To start a project on Design And Implementation Of A Four Way Traffic Light Control Circuit, follow these guidelines: This work has been aimed at efficient means of controlling the traffic effectively for twenty-four hours. As the world is growing technologically more and more vehicles jump into the public road adding to the already existing number. Consequently, more efficient way of controlling the traffics be…

46 Pages 1 - 5 Chapters 5,589 Words DOC/PDF Format Instant Download UPN2179

Understand how to write the “Design And Construction Of Sound Detector With Alarm System” Project

To develop a project on Design And Construction Of Sound Detector With Alarm System, follow these approaches: This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. The 1st block is pick up amplifier containing the microphone and …

34 Pages 1 - 5 Chapters 6,016 Words DOC/PDF Format Instant Download UPN2155

To undertake a project on Design And Construction Of Arduino Based Traffic Lights System With Vehicle Counter, follow these effective ways: This project work is on design and construction of a traffic lighting system with vehicle counter. This device was designed to replace a manual traffic control and vehicle method. The device is a portable traffic light unit which can be best utilized in controlling traffic flow in a high way. The…

54 Pages 1 - 5 Chapters 7,936 Words DOC/PDF Format Instant Download UPN2554

Posted under:

To write a project on Design And Construction Of A Password Based Circuit Breaker, follow these structure: The circuit breaker is an absolutely essential device in the modern world, and one of the most important safety mechanisms in your home. Whenever electrical wiring in a building has too much current flowing through it, these simple machines cut the power until somebody can fix the problem. Withou…

65 Pages 1 - 5 Chapters 9,122 Words DOC/PDF Format Instant Download UPN4039

Learn the structure to write the “Design And Construction Of A Noise Meter / Sound Meter” Project

To carry out a project on Design And Construction Of A Noise Meter / Sound Meter, follow these effective methods: This work is on a noise or sound meter. This device is used to measure the level of noise. With the portable noise meter you can carry out measurements quickly to gain control of a situation or to set the sound meter to take timed measurements. The noise meter is important for all industries, esp…

46 Pages 1 - 5 Chapters 6,777 Words DOC/PDF Format Instant Download UPN3173

ABSTRACT This work is titled design and construction of a close circuit monitor. A close circuit monitor involves using a video camera or photography camera to monitor the situation of an environment. Closed-circuit monitor is the use of  cameras to transmit a signal to a specific place, on a limited set of monitors. It differs from br […]
TABLE OF CONTENTS Numbers                                                    Title                                                                   Page DECLARATION                                                                                                 i ABSTRACT                                                                  […]
Posted under:
ABSTRACT Noise has been defined as an unwanted signal. Sound noise is a major societal problem, whose health, environmental and even economic impact is very important. According to the World Health Organization (WHO), noise is an acoustic phenomenon that produces an uncomfortable hearing sensation. Populations whose buildings are housed […]
ABSTRACT Generally, street lights are switched ON for whole night and during the day, they are switched off. But during the night time, street lights are not necessary if there is no traffic. Saving of this energy is very important factor these days as energy resources are getting reduced day by day. Alternatives for natural resources ar […]
Live Chat