Construction Of An Electrical Stove With Three Oven Apartment

This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of kerosine and gas for cooking and drying which are often not available due to scarcity of these products, however, the project students have employed the use of electricity which is rending available.
The analysis of each stage of development of this equipment is cleearly described. Having compared the results of this construction with those exsisting or parallel ones, it was found out that it stands the test of time.
However, the operation of this electrical equipment in not without limitation. For precisely nine years now Nigeria has been facing power instability, and a seizure of electrical power does disrupt the operation of this equipment, for without which no source of its energy.
The cost analysis also prove to a large extent to be relatively cheaper than most modern cookers and ovens for domestic application.

 

1.0 INTRODUCTION/LITERATURE REVIEW
1.1 INTRODUCTION
This project is as a result of increasing interest.
Essentially, the idea, as demonstrated in an existing design, arises in the project students a feeling of motivation, and hence the search for a way to bring it to reality in a simple, yet intelligent design, like this.

1.2 PROBLEM STATEMENT
Specifically, this design seeks for a source of energy that is relatively cheap and available, and therefore has an edge over other stoves and ovens using kerosine and gas as sources of energy. It also aims at making domestic cookers and ovens safe enough as against highly flammable liquid or gas fuel.
Many Nigerians today are faced with the problem of petroleum fuel scarcity and as per cooking and drying which is not often easy to get fire wood from forests that are often far away especially from the big cities. Equally too, the few available fuels are of substandard quality with the attendant danger of fire outbreak.
In addition above, fuel consuming cookers and ovens have two outstanding deficiencies, namely; sooty pre-heating and problem of dogged nozzles which lead to offensive discouraging and dirty burning.
Above all, deforestation as a result of fire wood consumption is causing great deal of environmental problems in most regions of Africa. In this modern world and its various invented means of cooking, it largely seems as if non has quite addressed this area by providing an alternative means of cooking and drying.
In a close observation, large scale cooking and drying as an drying of meat and fish sellers, commercial corn roasters, food sellers and “suya” sellers, etc, need efficient heating system. The absence of short drying period and hygienic process of preserving our loide and sea foods is another issue, which has led to fast spoiling and give an electrical stove with an oven apartment to sufficiently address these problems.

1.3 PURPOSE OR OBJECTIVE OF THIS STUDY
This study is to devise a means of producing an electrical stove with three apartment to address the following:
(1) The problem of sooty pare-heating as observed in vaporizing cookers.
(2) Economically, this equipment is designed for cost reduction and easy to maintain.
(2) To reduce the effect of kerosine scarcity prevailing in our present days.
(3) To meet up with inadequate availability of fire wood through deforestat6ion.

1.4 LITERATURE REVIEW
In an extremely large span of time ago, people generally roasted by placing food substances on hot wood coal or on heated rocks, and smoking (drying) ,of meat and fish was done by means of brick oven. This brick oven was locally made in a dome shape having an opening through which the firewood and other food substances were put. In use, the firewood was burnt to a sufficient time to provide enough hot coal before the meat or the fish already laid on a perforated sheet or wire was regulated by either gathering the fire wood together for more heat or withdrawing them from the oven so as to reduce the heat. This event can be dated back at least to the third century AD
Equally too, primitive Africans set fire on a carefully arranged fire wood and used the fire so generated for cooking. That was when civilization was still in the womb of time. As a result of science and technology electricity came into during such trend that electrical element was made to generate heat when electric current is passed through it. About 1914 electricity was adopted for cooking, and become popular in late 1920s. along side those periods, oil exploration and its various refined products like kerosine, gas, etc for both industrial and domestic consumption were made possible. Hence, kerosine stores and gas cookers, over the years, began to replace the primitive way of using firewood for cooking and drying, particularly in most civilized regions of Africa.
Then came a time, late part of the last century and the new millennium, when petroleum fuel scarcity overwhelmed the entire nation, making lives of many Nigerians difficult. Consequently, kerosine stoves and gas cookers became n o more alternative as before. Many Nigerians began using fire wood for cooking and drying. This period was crucial during the PENGASAM strike, 1994. When a certain container inside which coal is burnt to provide heat for cooking and roasting was named
ABACHA STGOVE: In the course of the above periods, foreign electrical stoves and ovens flooded our local market, and their maintenance culture were by no means easy. Thus, economically their uses were not feasible enough domestically.
Thus threw a challenge to our local engineers to produce electrical stoves and ovens that can stand the test of time within our locality, and to avoid the danger of kerosine and gas explosion which have terminated a lot of lives in our present days. Such a challenge also paved way for the project students came up with such a dual-purpose domestic electrical heating equipment to sufficiently address the problems being imposed by petroleum fuel consuming stoves and ovens, incessant as stated preciously in 1.2. above.

2.0 INTRODUCTION:

This chapter provides the background and context of the research problems, reviews the existing literature on the Construction Of An Electrical Stove With Three Oven Apartment, and acknowledges the contributions of scholars who have previously conducted similar research [REV1552] …

Title page
Table of content
Certification
Dedication
Acknowledgement
Abstract
Approval

CHAPTER ONE
1.0 Introduction/literature Review
1.1 Introduction
1.2 Problem statement
1.3 Purpose of objective of this study
1.4 Literature review

CHAPTER TWO
2.0 Constructional specification of the oven
2.1 Determination of the insulted portion
2.2 Materials used and their importance
2.3 Mill steel
2.4 Copper element
2.5 Insulting materials
2.6 Silicon

CHAPTER THREE
3.1 Mechanical construction
3.2 The main frame
3.3 The top and sides covers
3.4 Back cover
3.5 The top/heating chamber
3.6 Stand/handle
3.7 The framing of the door
3.8 Mode of operation

CHAPTER FOUR
4.0 Conclusion
4.1 How to operate
4.2 Inspection and testing
4.3 The visual inspection
4.4 Cold test
4.5 Insulation Resistance test
4.6 The hot test
4.7 Problems encountered
4.8 Recommendations
4.9 Cost analysis
5.0 References

Document Information

  • Pages: 41 Pages
  • Chapters: 1 – 5 Chapters
  • Words: 3,263 Words
  • Format: DOC/PDF
  • Time: Instant Download
  • Title: Construction Of An Electrical Stove With Three Oven Apartment:

YOU MAY LOVE THESE (Recommended)

How to write the “Fabrication Of Briquette Stove” Project

Posted under:

To start a project on Fabrication Of Briquette Stove, follow these guidelines: This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette. The project which is the fabrication of briquette stove was made from preferentially selected engineering materials like mild steels of di…

67 Pages 1 - 6 Chapters 9,246 Words DOC/PDF Format Instant Download UPN1142

Understand how to write the “Fabrication Of A Pressurized Kerosene Oven” Project

To develop a project on Fabrication Of A Pressurized Kerosene Oven, follow these approaches: The fabrication of a pressurized kerosene oven. This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that…

53 Pages 1 - 8 Chapters 3,751 Words DOC/PDF Format Instant Download UPN1599

Discover how to write the “Design And Fabrication Of An Electric – Charcoal Stove” Project

Posted under:

To undertake a project on Design And Fabrication Of An Electric – Charcoal Stove, follow these effective ways: Due to irregular power supply common in developing countries, as well as growing high cost of hydrocarbon, the need arises for the development of a double energy source that uses electricity and charcoal for stove. The double powered stove is a combination of components that make possible the use…

53 Pages 1 - 5 Chapters 8,181 Words DOC/PDF Format Instant Download UPN4261

To write a project on Design And Construction Of Wireless Security Surveillance Camera, follow these structure: The implementation and use of video surveillance (Closed Circuit Television technology) in societies across the globe has stimulated major debate on a handful of topics. This report aims to highlight the importance of surveillance camera in electrical laboratory. The report will provide the reade…

49 Pages 1 - 5 Chapters 6,776 Words DOC/PDF Format Instant Download UPN2929

Learn the structure to write the “Design And Construction Of Baking Oven” Project

Posted under:

To carry out a project on Design And Construction Of Baking Oven, follow these effective methods: This project is aimed at producing an oven a purposeful baking oven with temperature regulator, which is economical and very convenient to use. The equipment was designed taking into consideration the case of its production, maintenance and services. The production design which includes planning …

63 Pages 1 - 6 Chapters 7,931 Words DOC/PDF Format Instant Download UPN1562

To start a project on Design And Construction Of An Electrical Charcoal And Gas Oven, follow these guidelines: The aim of this project is to design and construct a portable combine Charcoal, Electric and Gas baking oven with a temperature regulator/sensor. The major reason for undertaken this project is to design and construct a portable combine oven with three mode of heating, and also to improve the per…

63 Pages 1 - 5 Chapters 8,885 Words DOC/PDF Format Instant Download UPN2232

Understand how to write the “Construction Of Kerosene Cooking Stove” Project

Posted under:

To develop a project on Construction Of Kerosene Cooking Stove, follow these approaches: The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties p…

58 Pages 1 - 5 Chapters 6,645 Words DOC/PDF Format Instant Download UPN1088

Discover how to write the “Construction Of An Electric Standing Fan” Project

To undertake a project on Construction Of An Electric Standing Fan, follow these effective ways: An electric standing fan includes a fan shaft driven by a fan motor supported by a motor support. An oscillating device includes a rotational shaft connected to the motor support for driving the motor support to oscillate. A transmission gear has an axle connected to the rotational shaft and a ge…

40 Pages 1 - 5 Chapters 5,750 Words DOC/PDF Format Instant Download UPN3522

To write a project on Construction Of Laboratory Equipment For The Determination / Investigation Of Electrical Insulator Breakdown, follow these structure: An inverter is an electronic device that converts direct current (DC¬) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household elec…

Learn the structure to write the “Design And Installation Of A Conventional Electrical Street Lighting” Project

ABSTRACT This project is on design and construction of a street lighting using conventional power supply. As the name implies, a Street light is a raised source of light on the edge of a road or walkway, which is turned on every night. Street light primarily served the purpose of security, both to protect the wanderer from tripping on t […]
Live Chat