Construction Of An IoT Based Fire Alarm System

In the realm of contemporary safety measures, the construction of an Internet of Things (IoT) based fire alarm system emerges as a pivotal endeavor, amalgamating cutting-edge technology with crucial fire detection and alert mechanisms. This innovative system integrates various sensors, such as smoke and temperature detectors, with IoT-enabled devices to facilitate real-time monitoring and swift response to potential fire hazards. By leveraging cloud computing and wireless communication protocols, the system ensures seamless data transmission and accessibility, allowing remote monitoring and control from any internet-connected device. Through proactive detection and automated alerts, this sophisticated fire alarm system not only enhances the safety of residential and commercial spaces but also minimizes the risk of property damage and human casualties. Furthermore, its adaptive nature enables scalability and customization to suit diverse environments and requirements, making it an indispensable solution in modern fire safety practices.

ABSTRACT

Fire accident in industry is a spontaneous and uncontrolled occasion wherein an activity or response of an item, a substance, an individual, or a radiation brings about close to home damage. There are a few mishaps occur because of fire. Fire identifiers are utilized to recognize the fire or smoke at a beginning time and can help in sparing lives. Right now, IOT based alarm has been planned utilizing temperature and smoke sensor. It would not just flag the nearness of fire in a specific reason yet will likewise send related data through IOT. By utilizing the temperature sensor, smoke sensor and there is a simple to advanced convertor, which changes over the simple signs got at the sensor end to computerized and afterward transmits them to a smaller scale controller and to the Arduino. The small-scale controller is modified to turn on the ringer, when the temperature and the smoke arrive at an edge esteem. Simultaneously, Arduino sends the information to the Wi-Fi module ESP32. ESP32 will then the accompanying information to the IOT site, where, approved individuals can take fitting measure so as to check the fire. The gadget id is the one-of-a-kind id given to a gadget, which would enable the work force to get data identified with the area, where the fire is detected. This work is based on fire alarm system using IOT.

TABLE OF CONTENT

COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT

CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 PROBLEM STATEMENT
1.3 AIM AND OBJECTIVES OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 SCOPE AND LIMITATION OF THE STUDY
1.6 APPLICATION OF THE PROJECT
1.7 PROJECT ORGANISATION

CHAPTER TWO
LITERATURE REVIEW
2.1 INTRODUCTION
2.2 REVIEW OF RELATED STUDIES
2.3 HISTORICAL BACKGROUND OF FIRE ALARM
2.4 REVIEW OF SMOKE DETECTOR
2.5 REVIEW OF TYPES OF FIRE ALARM SYSTEM
2.6 REVIEW OF FIRE ALARM DESIGN
2.7 REVIEW OF FIRE ALARM PARTS
2.8 REVIEW OF FIRE ALARM INITIATING DEVICES
2.9 FIRE ALARM NOTIFICATION APPLIANCES
2.10 OVERVIEW OF INTERNET OF THINGS

CHAPTER THREE
3.0 METHODOLOGY
3.1 METHODOLOGY
3.2 DESIGN OF IOT
3.3 SYSTEM HARDWARE DESCRIPTION
3.4 SYSTEM SOFTWARE
3.5 SYSTEM CIRCUIT
3.6 PROGRAM CODE
3.7 POWER SUPPLY UNIT

CHAPTER FOUR
4.0 TESTING AND RESULTS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 INSTALLATION OF THE COMPLET DESIGN
4.3 ASSEMBLING OF SECTIONS
4.4 TESTING OF SYSTEM OPERATION
4.5 RESULT AND DISCUSSION

CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES

CHAPTER ONE

1.0 INTRODUCTION

1.1 BACKGROUND OF THE STUDY

A fire is a condition of consuming that delivers the blazes and warmth. The fire can possibly make hurt its inhabitants and serious harm to the property. Mechanical security survey magazine expresses that there are 25,000 people passed on because of fire mishaps in India in the time of 2001-2014 (NCRB, 2014). The harm of structures and loss of human life can be occurred because of fire mishaps in the enterprises. This present examination endeavours for to discover the staff characteristics of business factors and work factors that include which prompts fire mishap in the business.

Putting out fires and observing circumstances are intense today. They concentrate on improve the science and innovation in opposing fire debacles. They are worried about the use of new innovation, for example, IOT and remote sensor arrange in putting out fires and observing field. IOT is truly appropriate for putting out fires with wide degree alongside remote sensor network (Liu et al., 2014).

A key part of fire insurance in the business is to build up the wellbeing framework by utilizing alarm sign to the association by methods for IOT innovation to the encompassing territory in the business. The conceivable weighty harms and bothersome expenses on both condition and network calls for additional improvement of wellbeing methodology and selection of proper techniques in taking care of dangers in industry and fast activity on standard working strategy if there should be an occurrence of arrival of risks detected. The fire mishap from Hong Kong shipyard is a significant episode which passed on to look for regard for the unfathomable capability of perils like fire blast in term of ruin of human life, their wellbeing and resources and enduring effects. The forest fire can be controlled by using IOT based alarm framework is utilized in all the businesses to keep from the fire mishaps (Morris et al., 2017).

A fire accident has wounds offers to the laborers removed remove an unfortunate casualty’s personal satisfaction to a critical degree. Second and severely charred areas regularly leave awful scars, and in the event that these scars are promptly clear, at that point the settlement will for the most part be higher because of enthusiastic harms. Consume wounds can leave an injured individual with interminable agony or loss of portability too, the two of which will require progressing exercise based recuperation.

It is huge to know the issue condition of fire danger in the business present to the seriousness of mishap and impact the official measures to control. The impacts will be experienced if fire will make change state to stifle themselves due any human or mechanical disappointment causes and straightforwardly influence the human life close by and working condition.

The point of this examination about peril present in condition which can be lead to fire accident in the association. The fire accidents happened in ventures ought to be distinguished by utilizing this philosophy and reasonable activities in required to control the fire accident in the enterprises are should be created. The forest fire risk have to be identified and provide the solution for fire fighters using the IOT technology the wildlife and animal lives in the forest is to be saved according to Alonso-Betanzos et al (2013).

1.2 PROBLEM STATEMENT

The Nigerian environment is considered to be hazards prone brought about by man-made and natural disasters due to its geographic circumstance which is exposed to catastrophic, floods droughts and fires. Based on the reports; devastations of these natural hazards and disasters including fires have increased in recent years. Our lifestyle of negligence and adapting to emerging technological solutions puts us at the risk of loss to fire and related occurrences as seen in markets, homes and other public places. The risk of fire occurrence is high especially during the dry season, Christmas and New Year celebration due to firecrackers. In the case where house fires are prevalent, it has effect to derail the economic growth, destroy social and physical capital including infrastructures, which resort to reallocation of ongoing programs to finance relief operations to fatalities and inhabitants and reconstruction efforts which diverts funds to social services. Fires are considered natural and man-made hazards.

Many fire alarms have existed in the past but with some limitations. This device was invented to solve the problem of complex cabling and missing alarm of traditional fire alarm system, an IOT based fire alarm system based on GSM network is designed. ESP32 Microcontroller is main control chip, and the remote alarming and data exchanging are achieved by using GSM module and Wi-Fi module send information to the IOT site. By adopting smoke detector and temperature detector and using a variable threshold alert algorithm with temperature compensation, the accuracy of fire alarm is improved.

1.3 AIM AND OBJECTIVE OF THE PROJECT

The main aim of this work is to construct a device that will detect the unwanted presence of fire by monitoring environmental changes associated with combustion  using GSM SMS Alert system and internet alert system. The objectives of the work are:

  1. To build this device at lower cost
  2. To interface microcontroller with GSM, DHT22, MQ2 and LCD.
  3. To ensure security of our environment, lives and properties

1.4 SIGNIFICANCE OF THE PROJECT

The study will serve as a means of making the reader and the student involved to become familiar with integration of arduino / ESP32 with temperature and smoke sensor.

This device will serve as a means of increasing reliability and protection thereby protecting lives and properties.

1.5 SCOPE AND LIMITATION OF THE STUDY

The scope of this work covers the building of an IoT based fire alarm system using arduino as the heart of the device. Arduino sends the information to the Wi-Fi module ESP32. ESP32 is a chip which is utilized for associating the smaller scale controllers to Wi- Fi organize. ESP32 will then the accompanying information to the IOT site, where, approved individuals can take proper measure so as to curb the fire. This device is limited to the following function:

  1. It sends fire alert SMS and email with Temperature and Smoke Level to given number and email address. SMS and emailing system helps to monitor locations of the fire explosion.
  2. Makes Loud Sound using buzzer to alert about fire. Uses Standard MQ2 Smoke Sensor and DHT22 Temperature Sensor.

1.6 APPLICATION OF THE PROJECT

Fire alarms are prime necessities in modern buildings and architectures, especially in banks, data centers mines, industrial areas, factories and gas stations etc.

1.7 PROJECT ORGANISATION

The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.

Save/Share This On Social Media:
More About Construction Of An IoT Based Fire Alarm System Material

Author: See the writer of ‘Construction Of An IoT Based Fire Alarm System’ name on the first page of the downloaded file.

Acknowledgement: You must acknowledge and reference the writer of Construction Of An IoT Based Fire Alarm System on your acknowledgement and reference pages respectively.

Upload Similar: You can upload any content similar to Construction Of An IoT Based Fire Alarm System and get paid when someone downloaded the material.

Download: Click on “Donate & Download” under this Construction Of An IoT Based Fire Alarm System Title and you will be redirected to download page after the donation or chat with Us for alternative methods.

Content Size: Construction Of An IoT Based Fire Alarm System contains 5 Chapters, 65 Pages and 9,590 Words.