Design And Construction Of A 60Amps Automatic Changeover With Generator Auto Start And Timer

This product is another beautiful addition to the thriving DEC/ATSxxx automatic changeover series from Decrownies electronics. This model is equipped with the auto start function which automatically starts the generator when there is main power failure (if it is enabled). It allows the user to start the generator from wherever it is installed by pressing a button on the device if auto start is disabled.

It also has a timer which the user can use to time the generator to work for a desired number of hours and then automatically switch off after that (you can time your generator to run for 4 hours at night and allow your inverter take over from there). It detects the availability of main power and automatically changeover from generator and switches of the generator just like all other changeover models from Decrownies electronics.

Specifications:

• Works for all class of domestic generators (Key start or not)
• Can operate in either manual or automatic mode
• Users can start generator from the comfort of their room via a start button on the device
• Users can stop generator from the comfort of their room via a stop button on the device
• When in automatic mode, no user intervention needed for change over to occur
• Acts as a surge protector, protecting all your equipment from damage by low and high voltages
• Single phase, 60A output capacity

• Design And Construction Of Intruder Detector Alarm System With Direction / Location Display
• Design And Construction Of A Pyramid-Shaped Solar
• Design And Construction Of 60 Watts Power Amplifier
• Design And Construction Of Computer Controlled 16 Line 12 Volt Dc Output Interface For Robots
• Construction And Design Of Distance Proximity Sensor Using LDR And LED
• Design And Construction Of A Digital Door Code Lock System Using Computer Interface
• Design And Construction Of A Solar Water Heater For Domestic Use

• Electrical Electronics Engineering Project Topics and Materials