Design And Construction Of A Triple Mode Tone Generator
Chapters: 1-5 | Type: Project
Overview
ABSTRACT
This work is on a triple mode tone generator circuit that generates three different tones. It can use it as a call bell, burglar alarm or any other security alarm.
The circuit operates off a 12V battery. At the heart of the circuit is an LM556 dual timer IC having two separate LM555 timers built into it. The first timer is configured as an oscillator with a wide frequency range. The second timer is triggered by the output of the first timer. The circuit produces three sounds depending on the position of the rotary switch (S1). S1 is a single-pole, three-way switch.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
2.3 REVIEW OF 555 TIMERS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
4.7 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Click this button to request for the Design And Construction Of A Triple Mode Tone Generator complete material
Chat on WhatsApp to Request MaterialSimilar Project Materials
- Design And Construction Of A 220 / 12 Volts Single Phase Step Down Transformer
- Design And Construction Of Punch And Die For Production Of Cups
- Design And Construction Of A Remote Control Switching Device For Household Appliances Application
- Design And Construction Of Burglary Proof (Window)
- Design And Construction Of A Fire Alarm System Using LDR, 555 Timers And Relay
- Design And Construction Of Fire Alarm System In A Two Storey Building
- Design And Construction Of A Three Phase Automatic Change Over Switch With Generator Starter And Cut-Off