Design And Construction Of An Infrared Interruption Counter (AT89C2051)
Chapters: 1-5 | Type: Project
Overview
ABSTRACT
Infrared interruption counter is a reliable circuit that takes over the task of counting number of interruptions very accurately. When somebody enters into the room, then the Counter is Incremented by one. The total number of Persons inside the Room is displayed on the seven segment displays. The microcontroller does the above job it receives the signals from the sensors, and this signals operated under the control of software which is stored in ROM.
All the above systems are controlled by the Microcontroller. In our project we are using the popular 8 bit microcontroller AT89C2051. It is a 20 pin microcontroller.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
4.7 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Circuit Diagram:
Click this button to request for the Design And Construction Of An Infrared Interruption Counter (AT89C2051) complete material
Chat on WhatsApp to Request MaterialSimilar Project Materials
- State-Space Design And Construction Of A Magnetic Suspension System
- Application of Design Management Methods for Design Process Success for Construction Projects
- Design And Construction Of A Power Outage Alarm
- Design And Construction Of An Over And Under Voltage Protection Circuit Device [180-240V]
- Design, Construction And Performance Evaluation Of A Passive Solar Water Heater
- Design And Construction Of (12V-to-220V) Electrical Inverter
- Design And Construction Of Single Phase Automatic Change Over Switch From Generator To Power Holding Company Of Nigeria (P.H.C.N)