Design And Construction Of An RGB Bulb Using NE555 Timer
Chapters: 1-5 | Type: Project
Overview
ABSTREACT
Red-green-blue (RGB) multi-colour bulbs available in the market are expensive as these are based on a microcontroller. The program for the microcontroller is difficult to understand. Here is a simple and inexpensive circuit for an RGB bulb using 555 timer.
An RGB bulb is made up of three individual LEDs: red, green and blue. The intensities of these LEDs are varied to generate lights of different colours or shades.
The main objective of this project is to produce different light colours with the help of NE555 timer IC.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
2.3 REVIEW OF DIFFERENT COLOUR OF LEDs
2.4 REVIEW OF 555 TIMER I.C
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
Click this button to request for the Design And Construction Of An RGB Bulb Using NE555 Timer complete material
Chat on WhatsApp to Request MaterialSimilar Project Materials
- Design And Construction Of A 220 / 12 Volts Single Phase Step Down Transformer
- Design And Construction Of Punch And Die For Production Of Cups
- Design And Construction Of A Remote Control Switching Device For Household Appliances Application
- Design And Construction Of Burglary Proof (Window)
- Design And Construction Of A Fire Alarm System Using LDR, 555 Timers And Relay
- Design And Construction Of Fire Alarm System In A Two Storey Building
- Design And Construction Of A Three Phase Automatic Change Over Switch With Generator Starter And Cut-Off