Civil Engineering

Design Of An Indoor Sport Hall For The Physically Disabled And Maximum Utilization

Download Complete Material

The Design Of An Indoor Sport Hall For The Physically Disabled And Maximum Utilization Complete Project Material (PDF/DOC)

Chapter One

1.0 INTRODUCTION
This chapter introduces the Design Of An Indoor Sport Hall For The Physically Disabled And Maximum Utilization and its relevance, states the research problems, research questions, and objectives, provides a background of the study, and should also include the research hypothesis.

Chapter Two

2.0 LITERATURE REVIEW
2.1 Introduction
The chapter presents a review of related literature that supports the current research on the Design Of An Indoor Sport Hall For The Physically Disabled And Maximum Utilization, systematically identifying documents with relevant analyzed information to help the researcher understand existing knowledge, identify gaps, and outline research strategies, procedures, instruments, and their outcomes…

How To Download Complete Material (PDF/Doc)

This Research Work On “Design Of An Indoor Sport Hall For The Physically Disabled And Maximum Utilization” Complete Material Can Be Downloaded Through Whatsapp, Email Or Download Link. Click The Below Button To Proceed:

You May Also Request For (Table of Contents or Abstract or Chapter One) Preview Before Payment.

You May Like These Similar Topics

Effects Of Sugar Cane Bagasse Ash As Suplementary Cementitious Material In Production Of Concrete.

Sugarcane Bagasse is the fibrous residue leftover when sugarcane is squeezed for its juice. Bagasse ash is obtained by subjecting Bagasse to calcinations using furnace. This work is aimed tat using Bagasse Ash as a replacement in the production of concrete. The bagassewas collected from dumped in…

Structural Reinforcement Detailing Of A Single Storey Residential Building With Retaining Wall.

INTRODUCTION Before a designer can relate his requirements dearly in a construction industry, a drawing is to be prepared; this is because the drawing serves as a general means of communication. Thus, the drawing is adopted mostly, then other means of communication in engineering sectors. A structured engineer mostly engages himself in designs on construction of structures. Like roads, bridges, railways, dams, buildings and other publi […]

Structural Detailing Of Two Storey Building.

INTRODUCTION In other to provide information to contractors in a construction industry for works to be carried out on sites, drawings are produce, which serves as means of communication are used by designers in every engineering specters. For those reason, the works are mostly work of a structural engineer to design a construction of structure for sheltering to be completed, such as road, bridges, railways, dams, buildings and other re […]

Structural Detailing Of A Reinforced Concrete Structure – Duplex.

INTRODUCTION The work in the construction industry involves the client, the Architect, the Engineer, the quantity surveyor and the builders. A structural project is initiated by the Engineer (civil Engineer). The process of designing begins with the enginer’s appreciation of the client’s requirements. After the specification given to the engineer by architect according to the requirement of the client, the engineer develops different s […]

Strength Development In Concrete Using Different Type Of Cement.

The essence of this project work is to look into the causes of highway failure and the different types of failure which are presented along the Eliozu – New Airport road in Obio/Akpor L.G.A in River state, taken as a case study. Some factors identify as being responsible for the failure of the ch…

Route Survey Of The Stretch Of Road From Oriawo Along Ogbomoso Road, Oyo To School Of Science,.

Theproject was focused on the execution of route surveying for the purpose of road reconstruction from Oriawo along Ogbomosho road, Oyo to School of Science, Sabo Oyo Town. Stations were selected along the existing route at regular intervals as in the specifications Theodolite traverse was run o…

Road Deterioration.

This project report is a study carried out to determine the causes and remedies to road deterioration. A case study of Naze Junction to Futo Gate Road, this study talks about the existence and development of tacks, researches made to discover the causes and remedies of road deterioration, the roa…

Remodelling Of Conference Room, Floor Finishes, Window And Furnitures.

This project is anchored on the design and construction of Tiles, windows and furniture involves in the conference room their method and pattern of construction, it’s advantages value and as well other valuable tool such as; working tools for the construction of tiles; (cement, white cement, fine…

Relevance Of Road To Life And Its Activities.

This project involves the route survey which includes: reconnaissance survey, theodolite traversing and leveling operations as well as soil tests which includes; plastic limit test, liquid limit tests and moisture content determination, compaction tests and California bearing ratio tests. This pr…

Project Time Control In Building Construction.

Everyday life on bridge construction sites is commonly characterized by enormous pressure due to time and costs as well as difficult logistic requirements. Modern process simulation tools can be applied with increasing success. Projects are often affected by unscheduled constraints and limitation…

Disclamer:

This study on the Design Of An Indoor Sport Hall For The Physically Disabled And Maximum Utilization is solely for academic research purposes only and should be used as a research guideline or source of ideas. Copying word-for-word or submitting the entire project work to your school is unethical academic behavior and “UniProjects” is not part of it.

Uploaded by:
Guest