Development And Simulation Of A Sinusoidal Pulse Width Modulation-Based Control Scheme For Improved Efficiency And Torque Production In Single Phase Induction Machines

Download Complete Material

Download Complete Development And Simulation Of A Sinusoidal Pulse Width Modulation-Based Control Scheme For Improved Efficiency And Torque Production In Single Phase Induction Machines Research Materials (PDF/DOC)

Chapter One

1.0 INTRODUCTION
This chapter introduces the Development And Simulation Of A Sinusoidal Pulse Width Modulation-Based Control Scheme For Improved Efficiency And Torque Production In Single Phase Induction Machines and its relevance, states the research problems, research questions, and objectives, provides a background of the study, and should also include the research hypothesis…

Chapter Two

2.0 LITERATURE REVIEW
2.1 Introduction
This section presents a review of related literature that supports the current research on the Development And Simulation Of A Sinusoidal Pulse Width Modulation-Based Control Scheme For Improved Efficiency And Torque Production In Single Phase Induction Machines, systematically identifying documents with relevant analyzed information to help the researcher understand existing knowledge, identify gaps, and outline research strategies, procedures, instruments, and their outcomes…

Click the button below to request for the ‘COMPLETE MATERIAL (Chapters 1 to 5)

This Research Study On The Development And Simulation Of A Sinusoidal Pulse Width Modulation-Based Control Scheme For Improved Efficiency And Torque Production In Single Phase Induction Machines Is Relevant To Students And Researchers In The Following Fields:

Engineering (4494)

Similar Topics (Recommended)

Fabrication Of A Foldable Camp Bed.

42 Pages

|

4,209 Words

In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best satisfied the limitations were selected for production. The material selected design and cost analysi […]

Design And Construction Of Traffic Light.

28 Pages

|

2,923 Words

This project traffic light is design for the safety ness of vehicles our the road. It is a very destroy loop and sensor that which coordinate the system when the driver encounter long sharing of green light. The traffic light is consist of two more chamber or circuit red and green or amber/yellow which the red high gives the sign of stop the green is for free movement on the that is a junction or about.

Construction Of 100 Watt Audio Amplifier Systems.

29 Pages

|

3,397 Words

The purpose this text is to present at a primary and intermediate level a comprehensive over view of the construction principles and indeed the operation of a power amplifier with 100w as the output power. The history and importance of electronic as a unique braches of science cannot be over emphasized electronic as its history might have it is divide into sections the first began with the invention of the vacuum tube the second occupy […]

Effect Of Interface On The Quality Of Petroleum Product In Multi Purpose Pipeline System.

80 Pages

|

10,247 Words

Interface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where mixing occurs. Generally, interface is a boundary layer, so the boundary between two products when they are pumped in succession is known as interface. In Nigeria Petroleum Industries like NNPC (PPMC) make use of multi-purpose pipeline system. This is where interface comes in petroleum products. Interface as […]

Fabrication Of A Pressurized Kerosene Oven.

53 Pages

|

3,751 Words

The fabrication of a pressurized kerosene oven. This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics. It I am also be used in are where there are no source o […]

Formulation And Production Of Levera Soap.

92 Pages

|

12,200 Words

The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow tends to dissolve slowly at room temperature, whereas, soap of palm kernel oil product gives a qui […]

Production of Alkali Using Local Raw Material (palm inforescence).

85 Pages

|

8,424 Words

The project aims to develop a flow process to obtain the optimum temperature and time necessary for the maximum recovery of alkali present in palm inflorescence. On this ground, a preliminary experiment was performed. During this process, both male and female palm inflorescence were compared for maximum alkali production and it was observed that the female palm inflorescence produced highest quantity of alkali than the male palm inflor […]

"Development And Simulation Of A Sinusoidal Pulse Width Modulation-Based Control Scheme For Improved Efficiency And Torque Production In Single Phase Induction Machines" Not What You Are Searching For?
Search another topic here

References

The references section should list out all the sources cited throughout the Development And Simulation Of A Sinusoidal Pulse Width Modulation-Based Control Scheme For Improved Efficiency And Torque Production In Single Phase Induction Machines research work, formatted according to a specific citation style.