Design And Construction Of A PC-Based Candle Igniter
Chapters: 1-5 | Type: Project
Overview
ABSTRACT
This work is on a PC based candle igniter system that lets you light up a candle using matchsticks by just pressing the "Enter" key on the PC"s keyboard. It is especially useful when celebrating such occasions as birthdays and anniversaries.
The number of matchsticks required to light up the candle is placed on the candle. The heating coil for igniting the matchsticks is kept near them.
The interface circuitry between the PC and the heating coil for the candle-matchsticks arrangement comprises an inverter, monostable and relay driver. Transistor BC548 (T1) acts as the inverter, IC 555 (IC1) is configured as the monostable circuit and transistor SL100 (T2) is the relay driver.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
4.7 PROBLEM ENCOUNTERED
CHAPTER FIVE
5.1 CONCLUSION
5.2 RECOMMENDATION
5.3 REFERENCES
Click this button to request for the Design And Construction Of A PC-Based Candle Igniter complete material
Chat on WhatsApp to Request MaterialSimilar Project Materials
- Design And Construction Of A 220 / 12 Volts Single Phase Step Down Transformer
- Design And Construction Of Punch And Die For Production Of Cups
- Design And Construction Of A Remote Control Switching Device For Household Appliances Application
- Design And Construction Of Burglary Proof (Window)
- Design And Construction Of A Fire Alarm System Using LDR, 555 Timers And Relay
- Design And Construction Of Fire Alarm System In A Two Storey Building
- Design And Construction Of A Three Phase Automatic Change Over Switch With Generator Starter And Cut-Off