Design And Construction Of A Peak Detector Circuit
Chapters: 1-5 | Type: Project
Overview
ABSTRACT
Peak Detector Circuit is used to find the peak amplitude in a rapidly changing waveform. Peak detectors are generally used in the sound measuring applications to find the maximum level of sound in a particular area or place, that helps in determining the maximum loudness level in that place.
This work is on op-amp based peak detector, used to remove the voltage drop across the diode. Whenever the applied input voltage signal is greater than the threshold voltage of the diode, the diode will get forward biased and acts as a closed switch. Here, the diode is connected in the feedback and hence the circuit works as a buffer circuit. So, whatever input is applied to the positive terminal of the op-amp will be received at the output terminal.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
1.2 AIM OF THE PROJECT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 PURPOSE OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 PROBLEM/LIMITATION OF THE PROJECT
1.9 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF RELATED STUDIES
2.2 REVIEW OF RELATED TERMS
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 SYSTEM CIRCUIT DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM CIRCUIT DIAGRAM
3.5 CIRCUIT OPERATION
3.6 IMPORTANCE AND FUNCTION OF THE MAJOR COMPONENTS USED IN THIS CIRCUIT
3.7 POWER SUPPLY UNIT
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING
4.4.1 PRE-IMPLEMENTATION TESTING
4.4.2 POST-IMPLEMENTATION TESTING
4.5 RESULT
4.6 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
Click this button to request for the Design And Construction Of A Peak Detector Circuit complete material
Chat on WhatsApp to Request MaterialSimilar Project Materials
- Construction And Design Of 12 Volt Car Battery Charger Circuit With Phone Charging USB Port
- Design And Construction Of A Power Supply Restoration Alarm With 555 Timer, Buzzer And Led
- Design And Construction Of An FM Radio Receiver
- Design And Construction Of A Microcontroller Based Security System With Intruder Position Display
- Design And Construction Of A 220 / 12 Volts Single Phase Step Down Transformer
- Design And Construction Of Punch And Die For Production Of Cups
- Design And Construction Of A Remote Control Switching Device For Household Appliances Application