Biocontrol Potential Of Bacillus Thuringiensis Isolated From Soil Samples Against Larva Of Mosquito

5 Chapters
|
49 Pages
|
6,756 Words
|

Bacillus thuringiensis, derived from soil samples, represents a formidable biocontrol agent in the ongoing battle against mosquito larvae. This bacterium, harnessed for its potent larvicidal properties, emerges as a promising solution in the realm of vector control. The intrinsic capabilities of Bacillus thuringiensis to produce crystalline proteins, specifically δ-endotoxins, play a pivotal role in its efficacy against mosquito larvae. The bacterium’s biocontrol potential is underscored by its selective toxicity towards mosquito larvae, making it an environmentally friendly alternative to conventional chemical pesticides. Harnessing Bacillus thuringiensis as a biocontrol tool aligns with sustainable and eco-friendly approaches in combating mosquito-borne diseases. The significance of this biocontrol strategy lies in its dual impact: mitigating the menace of mosquitoes and simultaneously minimizing the ecological footprint associated with traditional larvicidal methods.

ABSTRACT

A major challenge for achieving successful mosquito control is overcoming
insecticide resistance. Bacillus thuringiensis which is one of the most effective biolarvacide for control of species of mosquitoes and monitoring of larval susceptibility is essential to avoid resistance development. Mosquito larvacidal activity of Bacillus thuringiensis was assessed by isolating them from ecologically different soil habitats in and around Enugu metropolis. The
isolate organisms were confirmed as Bacillus thuringiensis based on biochemical characterization and microscopic observation. The larvacidal activity of Bacillus thuringiensis isolates was tested against the larval of mosquito by using the standard cup bioassay. The isolates of Bacillus thuringiensis showed a significant level of variation in their larvacidal activity.

TABLE OF CONTENT

Title page:
Certification:
Dedication
Acknowledgement:
Abstract:
Table of contents:
List of tables:

CHAPTER ONE:
1.0 Introduction: 
1.1 Crystal composition and morphology:
1.2 General characteristics of Bacillus thuringlensis
1.3 Classification of Bacillus thuringiensis subspecies
1.4 Ecology and prevalence of Bacillus thuringrensis
1.5 Other pathogenic factors of Bacillus thuringiensis
1.6 Morphological properties of Bacillus thuringiensis

CHAPTER TWO:
2.0 LITERATURE REVIEW
2.1 Mode of action on target organism
2.2 Mechanism of action of Bacillus thuringensis formulation
2.3 General application of Bacillus thuringiensis

CHAPTER THREE:
3.0 Material and method
3.1 Soil sample collection
3.2 Isolation of Bacillus thuringiensis
3.3 Isolation of Bacillus thuringiensis from soil
3.4 Sample staining
3.5 Biochemical identification
3.6 Materials and method of Bacillus theringiensis against mosquito lava:
3.7 Catalase test: –
3.8 Oxidase enzyme activity:
3.9 Sugar test:
3.10 Methyl red test
3.11 Indole test

CHAPTER FOUR:
4.0 Result of sample collection and isolation: 
4.1 Colony morphology of Bacillus isolates:
4.2 Biochemical test:
4.3 Bioassay:

CHAPTER FIVE:
Discussion: 
Conclusion: –
Recommendations:
References:
Appendix: 1
Appendix: 2

CHAPTER ONE

INTRODUCTION
Bacillus thuringrensis (Bt) is a well known and widely studied bacterium
which is known for its use in pest management. Today it is the most successful commercial xenobiotic with its worldwide application when compared with the chemical pesticides; Bacillus thuringiensis has the advantages of being biologically degradable, selectively active on pests and less likely to cause resistance. Safety of Bacillus thuringiensis formulations for humans, beneficial animals and plants explains the replacement of chemical pesticides in many countries with these environmentally friendly
pest control agents. Bacillus thuringiensis was first isolated by the Japanese Scientist Ishiwata (1901) from skilkworm larvae, bombyxmori, exhibiting sotto disease. After 10 years, Berliner (1911) isolated the square gram (+) positive, sporeforming, rod shaped soil bacterium from disease flour moth larvae, Anngasta Kachmiccalla, in the Thuringia region of the Germany and named it as
Bacillus thuringiensis. In the early 1930s Bacillus thuringiensis was used against Ostrinianubilis, the European corn borer. The first commercial product was available in 1938 in France, with the trade name sporeine (Weiser, 1986). It was Bacillus
thuringiensis subspecies Kurstaki that was used for the control of the insect (Lepidopteran) pests in agriculture and forestry (Luthy & Ebersold, 1981). New commercial products arrived in 1980s after the discovering of subspecies thuringiensis opened the gate for black fly and mosquito larvae control. Like all organisms, insect are susceptible to infection by pathogenic microorganisms, many of these infections agents have a narrow host range and therefore, do not cause uncontrolled destruction of beneficial insects and
are not toxic to vertebrates. Bacillus thuringiensis is a major microorganism, which shows entamopathogenic activity (Glazer & Nikaido, 1995, Schnepf, et al. 1998) which forms parasporal crystals during the stationary phase of its growth cycle. Most Bacillus thuringiensis preparations available on the market contain spores with parasporal inclusion bodies composed of δ – endotoxins. In commercial production, the crystals and spores obtained from fermentation are concentrated and formulated for spray on application according to
conventional Agriculture practices (Baum, Kakefuda, & Gawron-Burke, 1996). There are many strains of Bacillus thuringiensis having insecticidal activity against insect order (eg Lepidoptera, Diptera, Homoptera, Mollaphage, Coloptera). Only a few of them have been commercially developed. Bacillus thuringiensis insecticides are divided into three groups, group one has been used for the control of lepidopterans. These groups of insecticides are formulated with Bacillus thuringiensis Subspecies. Kurstaki, group two contains thesandiego and tenebrionis strains of Bacillus thuringiensisand has been applied for the control of certain celopterans and their larvae. Group three contains the Israelensis strains of Bacillus thuringiensis which has been used to control black flies and mosquitoes.
CRYSTAL COMPOSITION AND MORPHOLOGY
The existence of parasporal inclusions in Bt was first noted I 1915 (Berliner 1915) but their protein composition was not delineated until the 1950s (Angus 1954). Hannay (1953) detected the crystalline fine structure that is a property of most of the parasporal inclusion. Bacillus thuringiensis subspecies can synthesize more than one inclusion, which may contain different ICPs. ICPs have been called data endotoxins; however since the term endotoxin usually refers to toxin associated with the other membranes of gram-negative bacteria, comprising a core lipopoly saccharide. Depending on their ICP composition, the crystals have various forms (bipyramidal, cuboidal, flat rhomboid, or a composition with two or more crystal types. A partial correlation between crystal morphology, ICP composition, and
bioactivity against target insects has been established (Bulla et al.1977). Hofte and Whitely, 1989, Lynch and Baumman, 1985).

GENERAL CHARACTERISTICS OF BACILLUS THURINGLENSIS
Bacillus thuringiensis is a member of the genes Bacillus and like the other members of the taxon, has the ability to form endospores that are resistant to inactivation by heat, desiccation and organic solvent. The spore formation of the organism varies from terminal to subterminal in sporangia that are not swollen, therefore, Bacillus thuringiensis resembles other members of Bacillus species in morphology and shape (Stahly, Andrews, & Yousten, 1991). The organism is gram-positive and facultitative anaerobes. The shape
of the cells of the organism is rod. The size when grown in standard liquid media varies 3 – 5um. The most distinguishing features of Bacillus thuringiensis from other closely related Bacillus species. (eg Bacillus anthracis, Bacillus. cereus) is the presence of the parasporal crystal body that is near to the spore outside the exosporangium during the endospore formation, which is shown in figure 1:1 (Andrews, Bibilops, & Bulla, 1985; Andrews, Faust, Wabiko, Raymond, & Bulla, 1987; Bulla, Faust, Andrews, & Goodma, 1995). Bacillus thuringiensis is an insecticide producing variant of Bacillus cereus (Gordon, Haynes, & Pang, 1973) several Bt species also produce Bacillus cereus type enterotooxin (Carlson, & Kolsto, 1993) plasmids coding for the insecticidal toxin of Bacillus thuringiensis have been transferred into B. cereus to make it a crystal producing variant of Bacillus thuringiensis(Gonzalez, Brown, Carlton, 1982) molecular methods including genomic restriction digestion analysis and 16 rRNA sequence comparison support that Bacillus thuringiensis, Bacillus anthracis and Bacillus cereus are closely relocated species and they should be considered as a single species (Carlson, Caugant,
& Kolstra, 1994; Ash , Farrow, Dorsch, Stackebrandt, & Collins. 1991; Helgason et al.2000).

CLASSIFICATION OF BACILLUS THURINGIENSIS SUBSPECIES
The classification of Bacillus thuringiensis based on the serological analysis of the flagella antigens was introduced in the early 1960s (de Barjac & Bonnefoi, 1962). This classification by serotype has been supplemented by morphological and biochemical criteria (de Barjac, 1981). Clutill (1977), explains that only 13 Bacillus thuringiensis subspecies were toxic to lepidopteran Larva only. And apparently Nematode (Narva et; al., 1991) enlarged the host range and markedly increased the number of subspecies up to the end of 1998, over 67 subspecies based on flagella H – Serovars had been identified.

ECOLOGY AND PREVALENCE OF BACILLUS THURINGRENSIS
Although our knowledge about Bacillus thuringiensis occurs naturally and it can also be added to an ecosystem artificially to control pest, prevalence of Bacillus thuringiensis in nature can be said as “natural” and can be isolated when there is no previous record of application of the organism for pest control. The Bacillus thuringiensis which belong to artificial habitat areas are sprayed based insecticides (mixture of spores and crystal). (Stahly et al. 1991). Thus, it is obvious that Bacillus thuringiensis is widespread in nature. However, the
normal habitat of the organism is soil. The organism grows naturally as asaprophyle, feeding on dead. Organic matter, therefore, the spores of Bacillus thuringiensis persist in soil and its vegetative growth occurs when there is nutrient available. Moreover Bacillus thuringiensis has recently been isolated from marine environments (Maeda et al. 2000) and from soil of Antarctica also (Foresty & Logan 2000). However the true role of the bacteria is not clear. Although it produces parasporal crystal inclusions that are toxic to many orders of insects, some species of Bacillus thuringiensis from diverse environments show no insecticidal activity. The insecticidal activities of Bacillus thuringiensis are rare in nature. For example, Iriarte et al.(2000) reported that there is no relationship between mosquito breeding sites and pathogenic action level of Bacillus thuringiensis in the surveyed aquatic habitats. While another study suggested that habitat with a high density of insect were originated by the pathogenic action of this bacterium (Itoqou Apoyolo et al.1995).

OTHER PATHOGENIC FACTORS OF BACILLUS THURINGIENSIS
At the period of the active growth cycle, the strains of Bacillus
thuringiensis produce extracellular compounds; this compound might yield to virulence. These extracellular compounds include proteases, chitinases phospholipases, and vegetative conseticidal protein (Zhang et al. 1993; Sohneff et al. 1998).
Bacillus thuringrensis also produces antibiotics compounds having antifungal activity (stab et al. 1994). However the crystal toxins are more effective then these extracellular compounds and allow the development of the bacteria in dead insect larvae.Bacillus thuringiensis  strains also produce a protease, which is called inhibitor. This protein attacks and selectively destroys cecropiris and attacisis which are antibacterial proteins in insects, as a result of this, the defence response of the insect collapses. This protease activity is specific, it attacks an open hydrophobic region near C – terminus of the cecropin and it does not attack the globular proteins (Duthambar & Steiner, 1984).
Other important insecticidal proteins which are unrelated to crustal proteins are vegetative insecticidal protein. These proteins are produce by some strains of Bacillus thuringiensis during vegetative growth.

MORPHOLOGICAL PROPERTIES OF BACILLUS THURINGIENSIS
Colony forms can help to distinguish Bacillus thuringiensis colonies from other Bacillus species. The organism forms white, rough colonies, which spread out and can expand over the plate very quickly. Bacillus thuringiensis strains have unswallon and ellipsoidal spores that lie in the subterminal position. The presence of parasporal crystals that are adjacent to the spore in another cell is the best criteria to distinguish Bacillus thuringiensis from other closely related Bacillus species. The size number, of parasporal inclusion and
morphology may vary among Bacillus thuringiensis strains. However, four distinct crystal morphologies are apparently the typical bipyramidal crystal, related to crystal proteins (Aronson et al. 1976). Cuboidal usually associated with bipyramidal crystal (Ohba&Aizawi 1986), amorphous and composite crystals related to cry4 and cry proteins (federicet al. 1990), and flat, square crystal related to cry3 proteins (Hernstadet al. 1986, Lopezmeza & Ibarra, 1996 The classification was based in part on the possession of parasporal bodies.
Bernard et al.(1997) isolated 5303 Bacillus thuringiensis from 80 different countries and 2793 of them were classified according to their crystal shape. Bacillus thuringiensis vary’s based on geographical or environmental location. Each habitat may contain novel Bacillus thuringiensis isolated that have more toxic effects on target insects. Intensive screening programs have been identified Bacillus thuringiensis strain from soil, plant surfaces and stored product dust samples. Therefore many strain collections have been described in the literature, such as Assian (Chak et al. 1994, Ben – Dov et al. 1997, 1999) and Maxican (Bravo et al. 1998). Therefore the aim of this study is to isolate Bacillus thuringiensis from soil sample and to isolate Bacillus thuringiensis against larva of mosquito or to determine Bacillus thuringiensis against larva of mosquito

Save/Share This On Social Media:
MORE DESCRIPTION:

Biocontrol Potential Of Bacillus Thuringiensis Isolated From Soil Samples Against Larva Of Mosquito:

Bacillus thuringiensis (Bt) is a soil-dwelling bacterium known for its biocontrol potential against various insect pests, including mosquito larvae. This bacterium produces protein toxins called “Cry toxins” that are specifically toxic to certain insect larvae, making it a valuable tool for mosquito larva control. Here’s how Bacillus thuringiensis can be used for mosquito larva biocontrol:

  1. Isolation and Identification: The first step is to isolate and identify Bacillus thuringiensis strains from soil samples. This can be done by collecting soil samples from areas with a history of mosquito infestations and then culturing the bacteria in a laboratory setting.
  2. Toxin Production: Bacillus thuringiensis strains produce various Cry toxins that are toxic to different types of insect larvae. To control mosquito larvae, you would need strains that produce Cry toxins specifically effective against mosquito larvae.
  3. Formulation: Once suitable strains are identified, they can be formulated into a product that is easy to apply to mosquito breeding sites. This can be in the form of granules, pellets, or liquid formulations.
  4. Application: The formulated product can then be applied to known mosquito breeding sites, such as stagnant water bodies, marshes, or other places where mosquito larvae are found. The Bt toxin will be ingested by the mosquito larvae when they feed on microorganisms in the water.
  5. Toxicity to Mosquito Larvae: The Cry toxins produced by Bacillus thuringiensis are highly specific and toxic to mosquito larvae but generally safe for other non-target organisms, including humans and animals. When the mosquito larvae ingest the toxin, it disrupts their digestive system, leading to their death.
  6. Monitoring and Evaluation: Regular monitoring and evaluation of the treated breeding sites are essential to assess the effectiveness of Bacillus thuringiensis-based biocontrol. This involves checking for a reduction in mosquito larva populations.
  7. Environmental Considerations: While Bacillus thuringiensis is generally considered safe for the environment, it is important to follow guidelines and best practices for its application to minimize any potential ecological impacts.
  8. Regulatory Compliance: Ensure that the use of Bacillus thuringiensis for mosquito larva control complies with local regulations and safety standards.
  9. Integrated Pest Management (IPM): Bacillus thuringiensis can be part of an integrated pest management strategy for mosquito control, which may also include other methods like source reduction (eliminating breeding sites), larviciding with other safe chemicals, and adult mosquito control.
  10. Research and Development: Ongoing research is crucial to identify and develop Bacillus thuringiensis strains with improved efficacy against mosquito larvae and to optimize application methods.

Using Bacillus thuringiensis for mosquito larva biocontrol is a sustainable and environmentally friendly approach, as it specifically targets the pest species while minimizing harm to non-target organisms and the ecosystem. However, the success of this method depends on factors such as the choice of Bt strains, formulation, application timing, and proper monitoring