Design And Construction Of A Sound Activated Switch

How to write the “Synthesis Of Activated Carbon From Enugu Coal” Project

To start a project on Synthesis Of Activated Carbon From Enugu Coal, follow these guidelines: This project was carried out using coal sample from Onyeama coal mine Enugu, Enugu State. Activated coal was produced by carbonizing the coal and activating it using phosphoric acid at a temperature of 5500c. the degree of bleaching of raw palm oil was monitored using spectronic meter through abs…

Techniques for writing the “Modification Of Surface, Physical And Chemical Properties Of Activated Carbons For Water Purification” Project

To develop a project on Modification Of Surface, Physical And Chemical Properties Of Activated Carbons For Water Purification, follow these approaches: The purpose of this work was to study the effect of chemical surface properties of activated carbons for their use in water purification. To achieve this objective, activated carbon in both granular and powdered forms namely: as received and devolatilized carbons were prepared. Proximate analysis…

Writing strategies for the “Home Control Switch Automation Using GSM Communication” Project

To undertake a project on Home Control Switch Automation Using GSM Communication, follow these effective ways: The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via…

Steps for writing the “Design And Construction Of Sound Detector With Alarm System” Project

To write a project on Design And Construction Of Sound Detector With Alarm System, follow these structure: This project is design and construction of a sound detector with alarm system was done primarily to detector sound. It can be use in industrial and domestics. It employ four discreet stages with power supply which power the system. The 1st block is pick up amplifier containing the microphone and …

Guide for writing the “Design And Construction Of Dark Activated Switch For Street Light” Project

To carry out a project on Design And Construction Of Dark Activated Switch For Street Light, follow these effective methods: A street lighting is any electrical lighting that is fixed outside house for the illumination of such environment or a Street light is a raised source of light on the edge of a road or walkway, which is turned on or lit at a certain time every night. Automatic street light controller will automa…

How to write the “Design And Construction Of A Switch Mode Power Supply” Project

To start a project on Design And Construction Of A Switch Mode Power Supply, follow these guidelines: This work is on switched-mode power supply (SMPS) which is an electronic circuit that converts power using switching devices that are turned on and off at high frequencies, and storage components such as inductors or capacitors to supply power when the switching device is in its non-conduction st…

Techniques for writing the “Design And Construction Of A Single Phase Automatic Change Over Switch With Phase Selector” Project

Techniques for writing the “Design And Construction Of A Noise Meter / Sound Meter” Project

To develop a project on Design And Construction Of A Noise Meter / Sound Meter, follow these approaches: This work is on a noise or sound meter. This device is used to measure the level of noise. With the portable noise meter you can carry out measurements quickly to gain control of a situation or to set the sound meter to take timed measurements. The noise meter is important for all industries, esp…

Writing strategies for the “Design And Construction Of A DC To AC Power Inverter Incorporated With An Automatic Switch Over Battery Charger” Project

Writing strategies for the “Construction Of Automatic Change Over Switch” Project