Design And Implementation Of Remote Control Door System

The Design And Implementation Of Remote Control Door System Complete Project Material (PDF/DOC)

Overview

ABSTRACT

The paper presents a simple design and implementation of a remote control door. It enables the user to control the door using remote from approximately10 meters away. The remote transmits a tone using an infrared light-emitting diode. This tone is decoded by a receiver, since the receiver only switches when the tone is received. The system was broken down into simpler functional blocks namely; infra-red transmitter, infra-red sensor, signal amplifier, control logic, sampler, control stepper, output control logic, load and display unit. Details of each subunit are described in the paper.

CHAPTER ONE

INTRODUCTION

1.1                        BACKGROUND OF THE STUDY

Security is the concern of people around the world. Beyond hiding object or constantly guarding them, the
most frequently used option is to secure them with a
device. Locks are the most widely employed security devices (Irving, 2013). They are found on anything to which access must be controlled, such as vehicles, storage containers, doors, gates and windows. The security of any property or
facility relies heavily on locking devices. Locks merely
deter or delay entry and should be supplemented with
other protection devices when a proper balance of physical
security is needed. And assessment of all hardware including door frames and jams, should be included in any physical security survey. Locking devices vary greatly in

appearance as well as function and application (Sandra, 2011).

Sliding door is a type of door which opens horizontally by sliding, whereby the door is either mounted on or suspended from a track. Types of sliding doors include pocket doors, Arcadia doors, and bypass doors. Sliding doors are commonly shower doors, glass doors, screen doors, wardrobe and the system can also be done and implemented in the building of school, hall, auditorium, banks, shopping malls, various departmental buildings and they can be extremely useful in a wide variety of environments.

Automation is the art of making processes or machines self-acting or self-moving, it also pertains to the technique of making a device, machine, process or procedure more fully automatic, it is a self-controlling or self-moving processes. Automation in the electrical, electronics and computing world has grown rapidly of which it dates back to 1940 when the first electronics computing machine was developed. This has aided humans as it basically reduces/eliminates human intervention, of which automatic sliding door also makes the list of automation in the electro-computing world (Alzar and Buhur, 2013)

An automatic door is an automated movable barrier installed at the entrance of a room, building or space to control and restrict access or provide privacy. Also an automatic door indicates a door that opens on its own as a moving object approaches it. It is an electro-mechanical door that has undergone the process of automation. The reason for making the sliding door automatic is to allow pedestrians to gain easy entrance in and out without having anyone to keep opening and closing the sliding door. (Giblasco, 2011).

This work is aimed at considering the possibility of
designing and implementing a remote control door opener Microcontroller-Based gate opener. This is done using Digital Code Lock through a Radio Frequency (RF)
Remote Controller which can enhance Security in homes,
offices, etc. This of course is an indispensable concept in
industrial electronics. Moreso, the value of security to
man is applicable to the facilities used by him. Most gates and doors in the industrial settings are fortified with automation. This remote control door opener project is for safeguarding a house or office focuses on the use of RF remote to control the
entrance and exit from a gate with an embedded
personalized code lock.

1.2     Aim/Objectives

The aim of this research work is to design and construct a simple model of an automatic sliding door and the objectives is to develop a simple model that can be transformed into a bigger project and also to understand the concepts involved in how an automatic sliding door works and to fabricate a simple model to show how the system works within the expected timeframe and with the available resources.

The major aim of this project is to design and implement a remote control door opener. To achieve this aim, the work will focus on the following objectives:

  1. To develop a suitable 5v power supply
  2. To design the methodology using TC4017 Decade counters
  3. To Interface the remote transmitter using 555 timers
  4. To Implement automatic Door control mechanism driving dc motor in both directions

1.3                                      SIGNIFICANCE OF THE STUDY

This project work will be beneficial as it would help to develop the ability of our potential and also increase our knowledge in electronic design. This design methodology offers security of lives and properties

This work will also benefit the economy as it help to reduce crime rate thereby affecting the economy positively. In commercial setting, this can be used as a revenue source. Finally, it will serve as basic technology advancement to students in engineering field of study since it will aid students who intends to carryout similar design.

1.4                                         SCOPE OF THE PROJECT

This kind of project can be used for different designs such as box, safe, gates, doors or garages. However, for the scope of this project it focuses on design and implementation of a remote control door opener.

Also, the remote control (RF) would access the door within the frequency range of 38kHz.

Furthermore, the scope will include in the design a door switch using a customized remote to open doors in order to avoid unauthorized persons from entering restricted areas.

1.5                                 LIMITATION OF THE PROJECT

During the process of this project design, lots of difficulties were encountered that is:

  1. Finance
  2. Unavailability of some raw materials for the research work.
  3. Time was another serious issue which was significant in the research required for this work.

1.6                                         METHODOLOGY

To achieve the aim and objectives of this work, the following are the steps involved:

  1. Study of the previous work on the project so as to improve it efficiency.
  2. Draw a block diagram.
  • Test for continuity of components and devices,
  1. Design and calculation for the system was carried out.
  2. Studying of various component used in circuit.
  3. Construct a system circuit.
  • Finally, the whole device was cased and final test was carried out.

1.7                         PROJECT REPORT ORGANIZATION

The organization of this project report is well detailed and vast in its coverage because it covers all the activities encountered during the project design. Chapter One of this work took care of the Introduction, Background, Aims and objective, significance, scope, limitations and Project report organization. Chapter Two highlight on literature review where it reviews and discusses past work of other authors on the subject matter. Chapter Three highlight design methodology. Chapter Four highlight on the implementation and testing. Chapter Five is all about the conclusions problem encountered recommendation and cost of the project.

Chapter Two

2.0 LITERATURE REVIEW
2.1 Introduction

The chapter presents a review of related literature that supports the current research on the Design And Implementation Of Remote Control Door System, systematically identifying documents with relevant analyzed information to help the researcher understand existing knowledge, identify gaps, and outline research strategies, procedures, instruments, and their outcomes

How To Download Complete Material (PDF/Doc)

This Research Work On “Design And Implementation Of Remote Control Door System” Complete Material Can Be Downloaded Through Whatsapp, Email Or Download Link. Click The Below Button To Proceed:

Disclamer:

This study on the Design And Implementation Of Remote Control Door System is solely for academic research purposes only and should be used as a research guideline or source of ideas. Copying word-for-word or submitting the entire project work to your school is unethical academic behavior and “UniProjects” is not part of it.