Design And Fabrication Of A Laboratory Scale Activated Carbon Filter For Water Treatment

In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best satisfied the limitations were selected for production. The material selected design and cost analysi […]

The fabrication of a pressurized kerosene oven. This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics. It I am also be used in are where there are no source o […]

Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength. This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml-) got from the catalogue and we enlarged the scale by 1: 8mm. aluminum cord was used in the construction of the v […]

Mechanical Engineering Department of the named institute has many has non operational machines sequel to the fact, maintenance was poorly executed which resulted to the breakdown of this refrigerator. Quality and effectiveness of machine maintenance were well observed. Also, a minimized cost of maintenance and a highly successful repair was adopted. In otherwords, during the repair and rehabilitation of this refrigerator appropriate to […]

The fabrication of this candle moulding machine was based on creative activity, which entailed integrated knowledge and application of material science, strength of material, property of material and elements of design. However, this project offered us the opportunity to use a great wealth of experience, intuition, ingenuity and aptitude-test to produce a system useful to the society. Candle moulding machine is universally used for mou […]

This project which is on the design and fabrication of a two face gas burner is a brief exploration on the various ways and means of designing, construction, operating the two face gas burner, putting cost into consideration for economic advantage. Herein are brief information and literature on gas burner. The properties of the constructional feature and their preference in construction are described. The combustion reaction resulting […]

This report covers all activities candied out to rehabilitate a faulty refrigerator. First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults. After which we bought the necessary standard items that caused the fault. We then started work on it by replacing necessary instruments. We finally listed it and found out that the objective was fully achieved.