ABSTRACT

The study for the search of renewable sources of energy is now a major concern worldwide as replacement to the high demand of fossil fuels. Majority of the electricity that is generated uses the Faraday’s law, the electromagnetic induction. This law led to new technologies that even brought up the misconception of free energy. Energy only becomes free if we don’t have to pay for the generation of it; hence we resort to abundant sources of energy that we can convert into electricity. The researcher used dc motor and magnet to generate power. Disc shaped magnets are placed in such a way that all the north poles or south poles are facing one direction. This magnet also produces a magnetic field, so both the magnetic fields repel each other (like poles repel), which causes the fins to move. The free Energy Generator was fitted onto the 2 wheelers in-front. The power extracted was used to charge a mobile battery. Few positive results are motivating us to create a better model to store the energy and use for different necessary applications by using this free energy. In this research paper, the usage of free energy was noticed by using a magnet and few satisfactory results are motivating us to review little research ground work of magnets to create a perfect strong prototype for better applications.

TABLE OF CONTENTS

COVER PAGE

TITLE PAGE

APPROVAL PAGE

DEDICATION

ACKNOWELDGEMENT

ABSTRACT

CHAPTER ONE

• INTRODUCTION
• BACKGROUND OF THE PROJECT
• PROBLEM STATEMENT
• AIM AND OBJECTIVE OF THE PROJECT
• SIGNIFICANCE OF THE PROJECT
• APPLICATION OF THE PROJECT
• SCOPE OF THE PROJECT
• LIMITATION OF THE PROJECT
• DEFINITION OF TERMS
• PROJECT ORGANISATION

CHAPTER TWO

LITERATURE REVIEW

• LITERATURE SURVEY OF THE STUDY
• THE EVOLUTION OF THE FREE ENERGY OPTION
• REVIEW OF FREE ENERGY TECHNOLOGY
• OVERVIEW OF A BRUSHLESS DC MOTOR

CHAPTER THREE

METHODOLOGY

• COMPONENTS OF FREE ENERGY GENERATOR
• PRINCIPLE OF OPERATION

CHAPTER FOUR

4.0      DISCUSSION OF EXPERIMENTAL MODEL & RESULTS

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES

 

CHAPTER ONE

1.0                                            INTRODUCTION

1.1                            BACKGROUND OF THE PROJECT

For the past decades, world’s main concerns are energy and environment. Demands in finding alternative source of energy as an answer to the dwindling energy sources has become one of the top priorities in the field of science and technology. More than 90% of the world’s generated power uses electromagnets based on faraday’s law of electro-magnetic induction. Thus, interests in Free Energy/Electricity become popular [3].

The concept of Free Energy/Electricity is a misconception. There is no such thing as free energy. However, if we generate it thru the means of readily available resources such as the Sun, Wind, Tidal, Hydro-electric, Geothermal is only free after the initial capital cost. The energy generated becomes free after the point that we don’t have to pay for the generation of the electric power produced by these non-conventional methods of generating electrical power [4].

Hence, the concept of generating electricity using magnets has been around us for some time. Their magnetic fields are used to produce electrical power. These magnets are placed in the cores of motors and generators. Power generation’s basic principle lies on the magnetic effect. It states that “when a conductor is rotated in a magnetic field, a voltage is induced in the conductor”. This study will be dealing with such conductors.

This work made the researcher to come up with the idea of Electromagnetic Induction means. With the use of DC motor and magnets, this study intends to devise a generator that will generate usable amount of electricity [4].

In this study, a brushless motor is used as a generator. Brushless DC motors were developed from conventional brushed DC motors with the availability of solid state power semiconductors. Brushless DC motors are similar to AC synchronous motors. The major difference is that synchronous motors develop a sinusoidal back EMF, as compared to a rectangular, or trapezoidal, back EMF for brushless DC motors. Both have stator created rotating magnetic fields producing torque in a magnetic rotor. Synchronous motors are usually large multi-kilowatt size, often with electromagnet rotors. True synchronous motors are considered to be single speed, submultiples of the power line frequency. Brushless DC motors tend to be small– a few watts to tens of watts, with permanent magnet rotors [5]. The speed of a brushless DC motor is not fixed unless driven by a phased locked loop slaved to a reference frequency.

1.2                                     PROBLEM STATEMENT

In the past, energy generation depends fully on fossil fuels which produces carbon monoxide and also have higher cost power generation bill. Because of these disadvantages, researchers came out with free energy generation. Free energy sources of energy are now a major concern worldwide as replacement to the high demand of fossil fuels. This energy becomes free only at a point after which we don’t have to pay for power generation after commissioning the unit. By using the magnetic force of magnets continuous motion (Energy) is generated [10].

We used Neodymium magnets are placed on the fins of the fan (dc motor). Disc shaped magnets are placed in such a way that all the north poles or south poles are facing one direction. This magnet also produces a magnetic field, so both the magnetic fields repel each other (like poles repel), which causes the fins to move, and thereby generating electricity.

1.3                       AIM AND OBJECTIVES OF THE STUDY

The main aim of this study is to devise a generator which uses alternative source of energy that can be used to harness and store electricity. The energy that will be stored can be used in different applications such as to power mobile devices.

This research has the following specific objectives:

1. To design and construct a Free Electricity Generator that is
2. To determine the type of DC motor and magnet to be used as an Electricity
3. To determine the specific energy source to be utilized in generating
4. To design the electronic circuit to be used to harness usable amount of
5. To construct the device using the gathered materials for the
6. To test the prototype and evaluate the results of this study.

1.4                            APPLICATION OF THE PROJECT

The energy generated can be used in numerous applications such as powering and charging mobile devices, powering small light emitting diodes and bulbs.

1.5                                  SCOPE OF THE PROJECT

This study focuses on the construction of the generator and evaluating the device to identify its possible applications and future enhancements. This prototype may impact and attract future researchers to work more on the research of free energy or renewable energy.

1.6                           SIGNIFICANCE OF THE PROJECT

1. Input energy or any external energy is not required to generate the energy
2. It is very simple to run

• It generates without any biohazards

1. Easy to maintain
2. Simple to construct
3. Higher torque

• Better dynamic performance

1.7                             LIMITATION OF THE PROJECT

The problems of the free energy generator are:

1. The high cost of Permanent magnets
2. Magnet corrosion and possible demagnetization

1.8                                         METHODOLOGY

To achieve the aim and objectives of this work, the following are the steps involved:

1. Study of the previous work on the project so as to improve it efficiency.
2. Draw a block diagram.

• Test for continuity of components and devices,

1. Design of the device was carried out.
2. Studying of various component used in circuit.
3. Construction of the circuit was carried out. The construction of this project includes the placing of components on Vero boards, soldering and connection of components,

• Finally, the whole device was cased and final test was carried out.

1.8     DEFINITION OF TERMS

ALTERNATIVE- it is offering or expressing a choice.

CHEMICAL- It is relating to chemistry

ELECTRICITY- a form of energy that is carried through wires and is used to operate machines, lights, and others.

ENCOUNTER- It is having a experience such as problems, difficulties and others.

GENERATE- its producing something.

KINETIC- It is relating to a movement of physical objects.

MACHINES- It is a piece of equipment with moving parts that work when it is given a power from an electricity.

NECESSARY- It is so much important that you must do it or have it.

NUCLEAR- It is using energy that is created when the nuclei of a atoms are split apart. TECHNOLOGY- It is type of machine, a piece of equipment and it is invent useful things to solve easily the problem.

THERMAL- It designed to keep you warm by preventing heat from a leaving your body.

1.9                                             PROJECT ORGANISATION

The work is organized as follows: chapter one discuses the introductory part of the work. Chapter two presents the literature review of the study, chapter three describes the methods applied, chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.