Investigation On The Impact Of Technological Advancement On The Performance Of Construction Industry

The Investigation On The Impact Of Technological Advancement On The Performance Of Construction Industry (PDF/DOC)

This Investigation On The Impact Of Technological Advancement On The Performance Of Construction Industry is available in pdf/doc. Click the button below to request the ‘COMPLETE MATERIAL,’ ‘Table of Contents,’ ‘Abstract,’ or ‘Chapter One’

Related Field(s):

Civil Engineering (220)

Similar Topics (Recommended)

Effects Of Aggregate Sizes On The Concrete Strength.

29 Pages

3,088 Words

In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must hsve to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse aggregates used in this work were collected from ishiagu while the fine aggregate was collected in front of […]

Basic Soil Test On Sub-Grade Soil Material & Flexible Pavement Design On Road Linking.

31 Pages

3,145 Words

COLLECTION OF SAMPLES AND LABORATORY TESTING PROGRAM The test carried out in this project was on distributed soil sample. This implies collecting soil samples that are disfigured their natural shape. Soil samples were collected on three (3) trial pit along Ugwuaji and Campus 111 IMT Enugu. A total of three (3) samples were collected from the trial pits (one from each pit) using pick are and spade. The samples were taken at 1.0m depth i […]

Structural Detailing Of A Reinforced Concrete Structure – Duplex.

39 Pages

4,108 Words

INTRODUCTION The work in the construction industry involves the client, the Architect, the Engineer, the quantity surveyor and the builders. A structural project is initiated by the Engineer (civil Engineer). The process of designing begins with the enginer’s appreciation of the client’s requirements. After the specification given to the engineer by architect according to the requirement of the client, the engineer develops different s […]

Structural Detailing Of Two Storey Building.

26 Pages

3,136 Words

INTRODUCTION In other to provide information to contractors in a construction industry for works to be carried out on sites, drawings are produce, which serves as means of communication are used by designers in every engineering specters. For those reason, the works are mostly work of a structural engineer to design a construction of structure for sheltering to be completed, such as road, bridges, railways, dams, buildings and other re […]

Effects Of Salt Water On Concrete.

85 Pages

11,565 Words

This project is carried out to know the effects of salt water on concrete. Salt water has salinity of about 3.5%. in that, about 78% is sodium chloride and 15% is chloride and sulphate of magnesium. The result gotten from the experiment being carried out shows different result from the mix design, casting, curing and crushing of different dates of each cubes. The compressive strength of each cube was also determined e.g. for the compre […]

Investigation Into Causes Of Building Collapse.

64 Pages

8,234 Words

INTRODUCTION 1.1 BACKGROUND Building can be explained as a structural that provides shelter to lives and properties, it could be a school, church, shop, or factory that has roof, walls. A lot of building specifically in Port-Harcourt and Lagos state have collapsed and thereby causing a huge economic waste and lost of lives of people and properties. Building failure can be defined as the collapse of structure, while building disaster gi […]

Structural Reinforcement Detailing Of A Single Storey Residential Building With Retaining Wall.

28 Pages

3,114 Words

INTRODUCTION Before a designer can relate his requirements dearly in a construction industry, a drawing is to be prepared; this is because the drawing serves as a general means of communication. Thus, the drawing is adopted mostly, then other means of communication in engineering sectors. A structured engineer mostly engages himself in designs on construction of structures. Like roads, bridges, railways, dams, buildings and other publi […]

Cite Project

APA MLA Chicago

Investigation On The Impact Of Technological Advancement On The Performance Of Construction Industry. (n.d.). UniProjects. https://uniprojects.net/project-materials/investigation-on-the-impact-of-technological-advancement-on-the-performance-of-construction-industry/

“Investigation On The Impact Of Technological Advancement On The Performance Of Construction Industry.” UniProjects, https://uniprojects.net/project-materials/investigation-on-the-impact-of-technological-advancement-on-the-performance-of-construction-industry/. Accessed 5 November 2024.

“Investigation On The Impact Of Technological Advancement On The Performance Of Construction Industry.” UniProjects, Accessed November 5, 2024. https://uniprojects.net/project-materials/investigation-on-the-impact-of-technological-advancement-on-the-performance-of-construction-industry/

The Investigation On The Impact Of Technological Advancement On The Performance Of Construction Industry Not What You Are Looking For?
Search another topic here: