Formulation And Comparison Of Industrial Bar Soap And Detergent

Download Complete Material

The Formulation And Comparison Of Industrial Bar Soap And Detergent (PDF/DOC)

Abstract

Stabilized adhesive was developed and produced. The development was made by the production of samples of the adhesive with varied quantities of the active ingredients and the additives. From the various formulations made, it was observed that formulations A is the best for paper adhesive.

In the formulation, starch was used as the binder, NaOH as a gelatinize, CaCO3 as the filler, the solvent was water, while formaldehyde was used as a preservative to control microbial attack. Borax provided the additional strength.

The working properties such as viscosity, strength (Bonding Strength) melting point etc was determined by analysis based on comparative study. The valves obtained in the table under result in chapter 3.4.0, adhesive was compared farvurably with those already existing in the market.

Chapter One

Introduction

1.0 Preamble

Technology has played an important role in man’s development and thus, has helped to shape the world as we see it today, this could be seen in all facets of industrial ventures, hence the introduction of new products into the market.

Man’s growing desire to hold two or more substance together by surface attachment so that they can be used as a single piece coupled with the technology advancement has given birth to a broad range of adhesive production to serve this purpose.

The technology has led to the conversion of starch which is gotten from cassava by mild caustic soda solution into a liquid glue that was stable at room temperature. It is the aim of this project to produce stabilized adhesive from cassava starch. Though starch can be extracted from other plants for example rice, wheat, potatoes etc. but our case of production is from cassava.

The starch – based commercial glue is very vital in paper industries and in other industries such as, bonding of corrugated board, laundry work for stiffening purposes, in sizing cloth, etc.

1.1 Aims And Objectives

Because of the growing need for adhesive in our local industries, it is the aim of this project to produce paper adhesive from cassava.

It is also aimed at producing adhesive for our local industries so as to achieve self and economic reliance by reducing our dependence on imported varieties or foreign paper adhesives.

It seeks to utilize our cassava resources that is abundant in nature and cheap to secure.

It also help to create employment for our unemployed citizens since adhesive industry does not require complex machinery.

It is the aim of this project to produce stabilized adhesive system that could stog for a long time before deteriorating.

 

1.2 The Scope Of The Project

The research work involves the extraction of starch from cassava, adhesive production under different production conditions is to determine the effects of varying production composition on the product. The project would also involve the analysis of the formulation gotten. It also determines the cost of production per annum of small scale plant.

Comparison between paper adhesive gotten from the market and that produced from the project of paper adhesives from cassava. It is done by detailed analysis of the products properties.

Chapter Two

2.0 LITERATURE REVIEW
2.1 Introduction
The chapter presents a review of related literature that supports the current research on the Formulation And Comparison Of Industrial Bar Soap And Detergent, systematically identifying documents with relevant analyzed information to help the researcher understand existing knowledge, identify gaps, and outline research strategies, procedures, instruments, and their outcomes…

How To Download Complete Material (PDF/Doc)

This Research Work On “Formulation And Comparison Of Industrial Bar Soap And Detergent” Complete Material Can Be Downloaded Through Whatsapp, Email Or Download Link. Click The Below Button To Proceed:

You may like these topics

Formulation And Production Of Levera Soap.

The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow tends to dissolve slowly at room temperature, whereas, soap of palm kernel oil product gives a qui […]

Production Of A High Quality Bar Soap And Compare With Detergent.

The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production considering several factors. In the production of bar soaps, palm kernel oil was used instead of fallow […]

Process And Quality Factors In Laundry And Toilet Soap Production.

This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the soap produced. These include the method used in production, types and nature of oils used, the percentage of the additives in the soap and the ratio at which oils are mixed to react with alkali. The work was carried out using one type of oil, namely, palm kernel oil for production of laun […]

Construction Of Soap Cutting Device.

Construction Of Soap Cutting Table, Soap Mould And Soap Cutters.

Construction Of Soap Moulds, Table And Cutters.

Glycerine Recovery From Spent Soap Lye.

Disclamer:

This study on the Formulation And Comparison Of Industrial Bar Soap And Detergent is solely for academic research purposes only and should be used as a research guideline or source of ideas. Copying word-for-word or submitting the entire project work to your school is unethical academic behavior and “UniProjects” is not part of it.