31 Pages
|
3,579 Words
INTRODUCTION All modern engineering system include certain aspects of control systems at some point in their broadcast sense, control engineering and the associated theory are concerned with the means by which systems may be made to behave an a desired way. The system on this thesis is a DC – AC converter, which is an apparatus which is used for conversion of Direct Current to Alternating Current or signal. In our country, this equipme […]
49 Pages
|
7,070 Words
A battery charger is an electrical device employed for charging batteries. These batteries that are usually charged by battery charger are the storage batteries also known as “accumulator” the battery charger changes. The alternating current forms the power line into d.c suitable for charging. When the battery is fully changed, is up to it’s maximum, 12 volt, the charger with automatically cut-off with the help of the contact relay […]
45 Pages
|
5,319 Words
A battery charger is an electrical device employed for charging batteries. This batteries that are usually charged by battery changer are the storage battery charger are the storage batteries also known as “accumulator” the battery changer changes. The alternating current form the power line into d.c suitable for charging. When the battery is fully changed, is up to it’s maximum, 12 volt, the charger with automatically stop changing wi […]
32 Pages
|
4,208 Words
Electronic Components require direct current (dc) for their effective operation. This direct current can be gotten either by rectifying an alternating current (ac) or Connecting the system to a direct current source which is usually a battery. It is observed that after some period of operation, the batteries no longer function as expected. This may be as a result of degradation or discharge of the battery. This phenomenon has resulted […]
33 Pages
|
4,212 Words
The practical importance of a battery charger in today world cannot be over emphasized. This is so as those batteries accumulators are immensely needed by out auto mobile and in science laboratories. This thesis describes the methodical approach to the design and construction of any battery charger. However the procedure fro developed cover the construction of battery charger for battery sizes ranging from 6 voltage to 24volatge (heavy […]
31 Pages
|
3,237 Words
The practical importance of a battery charging unit in today’s world cannot be over emphasized. This is so since these batteries or accumulators are immensely needed by automobiles and in science laboratories. This thesis describes the methodical approach to the design and construction of any battery changer. However the procedure developed cover the construction of battery charger for battery sizes ranging from 6 volts to 12 volts. Th […]
47 Pages
|
6,311 Words
This project focuses on the design and construction of a solar battery charger, crafted to address the increasing need for a reliable power supply to keep batteries charged. A solar battery charger is an electrical device that harnesses the photovoltaic effect to convert light energy directly into electricity. It utilizes a solar panel—a type of photoelectric cell whose electrical properties (such as current, voltage, or resistance) ch […]