44 Pages
|
5,111 Words
The 200W solar system was determined by load assessment, solar panel number determination, battery requirement and then inverter sizing. A complete solar panel rated at 200w was however purchased, together with 2 no. 150A solar battery, 1500W inverter and also 10A charge controller. These were assembled together with necessary protective gadgets like cut out switches; to give the 200W expected. The solar panel was mounted outside the b […]
104 Pages
|
13,648 Words
The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production considering several factors. In the production of bar soaps, palm kernel oil was used instead of fallow […]
46 Pages
|
5,154 Words
The uninterruptible power supply (UPS) is design to help in the offices, workshops and house hold appliances, due to the unstable power supply being supplied by (NEPA) presently known as Power Holding Company of Nigeria (PHCN) usually supply to us. With the help of the “UPS” we don’t need to depend much on PHCN it is stress free because it don’t need someone to change it over when light goes off, once there is any power failure it wil […]
100 Pages
|
13,257 Words
This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards were produced, their difference being in the type of fibre that was used. The fibres used for this different […]
40 Pages
|
5,648 Words
Cell phones need electric sources to charge their batteries in order to work, but there are people in developing and third world countries that find it hard to access electric sources. In an attempt to provide an alternative means of charging to those unfortunate areas in third world and developing countries, a solar powered cell phone charging booth is to be designed and constructed in this project. The goal of this project is to cre […]
40 Pages
|
5,325 Words
Electrical energy and water are two major things whose demands are very high globally. In order to meet these demands, the production of electrical energy has now been shifted more towards renewable sources of energy like solar. The crisis of water has also become a global concern. In this modern era where everything is getting automated, agriculture is an area where both electricity and water are very essential. In order to use electr […]
32 Pages
|
4,879 Words
Electrical power system engineering comprises power generation, transmission, distribution, and the utilization of electricity. Modern trends in the development of electric power systems explore means of improving efficiency in these stages mentioned. On the demand side, the protection of consumer equipment and appliances from damage and total destruction due to phase failures is an issue of paramount importance mainly in parts of the […]